Asset Publisher

AS7220 CCT and Lumen Maintenance Manager

Selectable CCT and lumen output maintained for the life of the luminaire

Features

  • Intelligent controller with integrated XYZ tristimulus sensor and selectable CCT presets
  • Industry standard CCT presets via mode resistor, or single CCT target value in Flash
  • Selectable drive modes, including PWM-switched current steering or PWM-based duty cycle management
  • Remaps dimming response from percent of power to percent of rated lumen output
  • 20-pin LGA 4.5mm x 4.7mm x 2.5mm, -40°C to 85°C
  • Compact lighting-capable package with no added optics required

Benefits

  • Flexible manufacturing and stocking inventories… One BOM can support multiple CCT SKUs
  • Eliminates lumen/color binning penalty, significantly reducing cost of quality lighting
  • Enables cost-optimized single channel drivers to deliver a precise CCT result
  • 100% lumen maintenance factor over the life of the luminaire

Product parameters

Sensor Type CIE tristimulus XYZ
Application Closed loop CCT and lumen compensation
UART No
Reference Networking n/a
Smart Ltg Command Set n/a
Lux/CCT Control Flash and hardware configurable
I²C Master for added ambient light sensing
Package 20-pin LGA with aperture

General Description

Simplify single or selectable CCT luminaire and replacement lamp designs with the AS7220 calibrated CCT and lumen maintenance smart lighting manager. Closed loop calibrated tri-stimulus color sensing for direct CIE color point mapping and control enables lower precision components to produce a higher-quality single or selectable-CCT luminaire or replacement lamp. Configurable single CCT lifetime target values are stored at the time of manufacture, allowing the AS7220 to manage independent LED strings to assure consistent CCT over time, temperature, and the full range of dimming. In addition, a selection of industry standard CCT targets can be selected via resistor configuration to enable a single BOM to satisfy multiple CCT SKUs while increasing lifetime color precision. Target lumen output lux-criteria are similarly configurable and are used by the AS7220 to map internal lux to manage LED strings to replace "percent of drive current" with "percent of rated lumen output", for all dimming operations. Legacy controls are fully supported with direct connection to 0-10V control,. Control outputs include direct PWM management of digital LED drivers or analog 0-10V for standard dimmable drivers.

This product suits for the following applications:

  • Accurate lamp to lamp CCT and lumen output
  • Flexible finished goods luminaire and replacement lamp inventory approaches
  • Selectable CCT, in the factory or at the customer
  • Standalone color and lumen maintenance lumaires and lamps

Tools

Title Category Headline Buy
AS7221/20/11/10 Smart Lighting IntegrationKit Application Board Smart Lighting Integration Kit for AS722x/1x

Resources

Name Type Description Language
AS721x_AS722x_SW000259_1-00.zip Software AS722x_EvalSWandFWLighting_v12-0-1 English

Technical Documents

Name Type Description Version Language
AS72xx_AN000488_3-00.pdf Application Note AS72xx How to Program AS72xx Firmware with FlashCatUSB 1V24 3-00 English
AS7220_BD000345_1-00.png Block Diagram AS7220 Block Diagram 1-00 English
AS7220_DS000509_1-00.pdf Datasheet Document version 1-00 1-00 English
AS7220_PD000474_1-00.pdf Other Product Document AS7220 2-slide brief 1-00 English
SmartLighting_PD000460_1-00.pdf Other Product Document ams Smart Lighting Short Intro-Jun 2018 1-00 English

Asset Publisher

Related Products