AS7030B Vital Sign Module
Smart Health & Fitness Solution
Features
- Improved optical path
- 250% larger embedded photodiode
- Embedded low noise analog front end for ECG signal acquisition
- Synchronized PPG and ECG acquisition
- Low noise analog optical front end
Benefits
- Address all skin types
- Improved sensitivity, higher optical noise ratio
- Electrocardiogram ECG with dry electrodes
- Enabling blood pressure measurements
- Improved HRM measurement quality
Product parameters
| Supply Voltage [V] | 2.7 - 5.5 |
|---|---|
| I²C Bus | I²C slave, Standard (100kHz) and Fast Mode (400kHz) |
| Temperature Range [°C] | -30 to 70 |
| Packages | 22 pins, 6.36mm x 3.51mm x 1mm |
| LED Configuration | 2 Green, 1 IR |
| Supported Algorithms | Blood Pressure, Heart Rate, Heart Rate Variability |
General Description
The operation of the AS7030B is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7030B is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The module includes the LEDs, photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the module also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7030B’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
This product suits for the following applications:
- Fitness band
- Smart watch
- Heart rate monitor
- Cuff less blood pressure measurements
- ECG monitoring
- Optical sensor platform
Tools
| Title | Category | Headline | Buy |
|---|---|---|---|
| AS7030B Eval Kit | Application Board | Evaluation Kit for AS7030B - Vital Signs |
Resources
| Type | Description | Language | |
|---|---|---|---|
| Evaluation Software | AS703x_EvalSW_v2-1-0-9.zip Evaluation Software with Firmware included for AS7030B, AS7038GB, AS7038RB EVKs | EN |
Technical Documents
| Type | Description | Language | |
|---|---|---|---|
| Datasheet | AS7030B datasheet | English | |
| User Guide | AS7030B Eval Kit Manual | English | |
| Other Product Document | AS7030B Design Guidelines | English |
Environmental Documents
| Type | Description | Language | |
|---|---|---|---|
| RoHS Certificate | RoHS Certificate_AS7030B | English |
Other Information
| Type | Description | Language | |
|---|---|---|---|
| Block Diagram | AS7030B Block Diagram | English |
Related Boards
Evaluation Kit for AS7030B - Vital Signs
AS7030B Eval Kit
The AS7030B Eval Kit is designed to evaluate all functions of the AS7030B biosensor and test them in various applications. For full flexibility, biosensor (AS7030B), temperature sensor (AS6200), accelerometer (LIS2DH12) and electrodes are located on the break out board, which can be used in any application and reconnected to the main board via FPC cable. There is also the option to attach different electrodes. After breaking off the Board it is also possible to connect the Wristband with the PicoBlade connector. The Eval Kit works with USB connection to the PC and comes with a GUI, which enables the user to change AS7030B register settings and see measurement results. The SDK containing algorithms for HRM and HRV. Any signals important for development can be probed easily at the pin headers.
Related Products
AS7026GG Vital Signs Module
AS7026GG
The operation of the AS7026 is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7026 is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The module includes the LEDs, photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the module also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7026’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7026 is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The module includes the LEDs, photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the module also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7026’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
AS7038RB Vital Sign Sensor
AS7038RB
The operation of the AS7038RB is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038RB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV, Continuous Blood Pressure and SpO2 values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV, Blood Pressure and SpO2, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038RB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038RB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV, Continuous Blood Pressure and SpO2 values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV, Blood Pressure and SpO2, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038RB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
AS7038GB Vital Sign Sensor
AS7038GB
The operation of the AS7038GB is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038GB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038GB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038GB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038GB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
AS7038RB Vital Sign Sensor
AS7038RB
The operation of the AS7038RB is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038RB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV, Continuous Blood Pressure and SpO2 values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV, Blood Pressure and SpO2, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038RB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038RB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV, Continuous Blood Pressure and SpO2 values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV, Blood Pressure and SpO2, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038RB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
AS7038GB Vital Sign Sensor
AS7038GB
The operation of the AS7038GB is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038GB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038GB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038GB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038GB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.