Programming Board for AS5134
General description
The AS5134-PB programming board is used for quick programming the AS5134 position sensor without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.
Other information
| Type | Description | Language | ||
|---|---|---|---|---|
| Image | AS5134-PB Image | English |
Related products
AS5134 Rotary Sensor
AS5134
The AS5134 is a contactless magnetic rotary position sensor for accurate angular measurement over a full turn of 360 degrees and over an extended ambient temperature of -40°C to +150°C. The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 8.5 bit = 360 positions per revolution via a serial output over the interface and as a pulse width modulated (PWM) signal.
With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
Related boards
Production Programmer SD4Y
SD4Y-PP
The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards.
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)