AS8510 Analog Front-End
Data acquisition IC for battery management, dual ADC
특징
- First 16-bit dual ADC and PGA data acquisition ASSP with zero offset as a flexible sensor interface
- Offset <1 LSB
- Noise <1 LSB@1kHz, 1 Sigma
장점
- Highest accuracy dual ADC for signal conditioning up to 4kHz
- Flexible concept enables short time to market in evolving field of battery management
- Full AEC-Q100 conformance
제품 매개 변수
| Channels [#] | 1 + 3 mux |
|---|---|
| Resolution [bit] | 16 |
| Sampling Rate [kSPS] | 4 |
| Zero Offset | Yes |
| Supply Voltage [V] | 3.3 |
| Standby Current [µA] | 40 |
| µC Interface | SPI |
| Supply Current [mA] | 4 |
| Package | SSOP-20 |
일반 설명
The AS8510 data acquisition front-end IC is a virtually offset free, low noise, 2-channel measurement device. It is tailored to accurately measure battery current from mA range up to kA range in combination with a 100 µOhm shunt resistor connected in series with the battery rail. Through the second measurement channel it enables capture of either battery voltage synchronous with the current or to measure the analog output of an internal or external temperature sensor.
이 제품은 다음 적용 분야에 적합합니다:
- Battery sensor with current sensor in the battery minus rail
- Battery sensor with current sensor in the battery plus rail together with AS8525 zero offset PGA and level translator
- General purpose sensor interface for high accuracy resistive sensors. The 2-channel architecture enables digital error correction techniques like delta by sigma division or capture of bridge current/voltages with subsequent error correction in external µC
- E-scooter battery management
툴
| 명칭 | 카테고리 | 제목 | 구매 |
|---|---|---|---|
| AS8510CopperShuntBoard | Application Board | Reference Design (Copper Shunt) for AS8510 | |
| AS8510DemoKit | Application Board | Demo Kit for AS8510 | |
| AS8510ReferenceDesignArduino | Application Board | Reference Design Arduino for AS8510 | |
| USB-Interface-Board | Accessories | USB Interface Board |
자원
| 유형 | 설명 | 언어 | ||
|---|---|---|---|---|
| Evaluation Software | AS8510_EvalSW_DemoSetup_v1-0.exe Software for Demo-Board | EN | ||
| Evaluation Software | AS8510_EvalSW_CShunt_v0-0-8-0.exe Software for Reference Design (Copper Shunt) | EN |
기술 문서
| 유형 | 설명 | 언어 | ||
|---|---|---|---|---|
| Datasheet | Document version 3.8 | English | ||
| User Guide | High Side Reference Design Manual | English | ||
| User Guide | Adapter board | English |
환경 문서
| 유형 | 설명 | 언어 | ||
|---|---|---|---|---|
| Material Declaration Form | MDF_183200010_AS8510-ASSP | English | ||
| Material Declaration Form | MDF_183200010_AS8510-ASSM | English | ||
| RoHS Certificate | RoHS Certificate AS8510 | English |
기타 정보
| 유형 | 설명 | 언어 | ||
|---|---|---|---|---|
| Block Diagram | AS8510 Block Diagram | English | ||
| Factsheet | Battery Sensing | English | ||
| Image | AS8510ReferenceDesign Image | English |
관련 보드
Reference Design (Copper Shunt) for AS8510
AS8510CopperShuntBoard
This Copper-Shunt based current sensor demo utilizes the AS8510 for current measurement and thermal-coefficient compensation. It is intended for a current range of ~40A operation and 60A maximum. Two measurement paths are provided. The left one uses the AS8510’s internal temperature sensor and the right one uses a fine copper meander trace to sense temperature.
Demo Kit for AS8510
AS8510DemoKit
The AS8510 Demo Kit for AS8510 data acquisition front-end IC allows easy evaluation of the AS8510 features. Its USB connector allows easy access to all the chips features via a user friendly graphical PC interface. The GUI is supplied with the evaluation board and can be used to plot measured data as well as to access all the device registers and evaluate special settings.
Key Features:
- User friendly graphical PC interface
- Easy implemenation in your own software (for example to do lab measurements in Labview) possible
Reference Design Arduino for AS8510
AS8510ReferenceDesignArduino
The AS8510 Arduino Shield Reference Design is an add-on to the very popular Arduino Series of µC development boards. The reference design allows to measure current and voltage via the AS8510 A/D IC and to use the measured data in any Arduino sketch. Schematic and layout are available as download with no restrictions. Libraries to interface to the Arduino IDE as well as example code can be downloaded for easy setup of this board.
For use of this AS8510 Arduino reference design an Arduino Uno (or similar) host board is required: http://arduino.cc/en/Main/ArduinoBoardUno
USB Interface Board
USB-Interface-Board
The USB Interface Board enables communication between the Copper-Shunt Demo and PC.
The kit consists of the dual layer PCB USB Interface Board and a HDMI Type-D to Type-C Cable which is used to connect demo board.
관련 제품
AS8525 LIN IC
AS8525
The AS8525 is a companion IC for battery- and current sensor LIN slaves. The integrated chop clock synchronization enables a zero offset measurement system for small shunt signals in positive battery rail in conjunction with AS8510.