Adapter Board for AS5116
일반 설명
The AS5116 Adapter Board is a small PCB allowing simple and quick testing or evaluation of the AS5116 magnetic position sensor without the need to build a test fixture or design an own PCB. The PCB can be connected either to an external microcontroller or to the USB
I&P Box.
The connector, 2x5 pin header (not populated), is included to this kit and is required for power supply as well as UART and analog interface.
기술 문서
| 유형 | 설명 | 언어 | ||
|---|---|---|---|---|
| User Guide | AS5116 Adapter Board User Guide | English |
기타 정보
| 유형 | 설명 | 언어 | ||
|---|---|---|---|---|
| Image | AS5116 Adapter Board |
관련 제품
AS5116 Position Sensor Sin/Cos Output
AS5116
The AS5116 is a contactless magnetic position sensor for accurate angular measurement over a full mechanical turn of 360°. Based on the Hall sensor technology, this device has a robust architecture that measures the orthogonal component of the flux density (Bz), over a full-turn rotation. To measure the angle, only a simple two-pole magnet rotating over the center of the package is required. The magnet can be placed above or below the device.
The absolute angle measurement provides an instant indication of the magnet’s angular position. The angle information is provided by means of buffered differential sine and cosine voltages. The AS5116 operates at a supply voltage of 5V or 3.3V.
The AS5116A is a preprogrammed version of AS5116. It has fixed settings and need no further programming.
With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
관련 보드
Production Programmer SD4Y
SD4Y-PP
The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards.
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)
USB I&P Box for I2C/SPI
USBI&PBox
The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration.
Hardware and Software requirements: PC with Windows 7 or later and a USB-A port
Hardware and Software requirements: PC with Windows 7 or later and a USB-A port