Evaluation Kit for TSL2584TSV
The TSL2584TSV Evaluation Kit comes with everything needed to evaluate the TSL2584TSV ambient light sensor. The evaluation kit comprises of a main controller board with a PIC microcontroller, an industry standard USB 2.0 interface (with an USB cable), a TSL2584TSV daughter card, "plug-n-play" USB HID class drivers, software documentation, and GUI software allowing users to control the ALS sensor settings as the PIC takes the TSL2584TSV I2C digital outputs to calculate ALS illuminance in lux approximating the human eye response. Kit Content: - Controller board - TSL2584TSV daughterboard - Software - USB cable
TSL2584TSV Ambient Light Sensor
The TSL2584TSV is a very high sensitivity light-to-digital converter that transforms light intensity into a digital signal output with a fast mode I²C interface. The device combines one broadband photodiode (visible plus infrared), one infrared-responding photodiode, and a photopic infrared-blocking filter on a single CMOS integrated circuit. Two integrating analog-to-digital converters (ADCs) convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2584TSV supports a traditional level style interrupt that remains asserted until the firmware clears it.