Reference Design Arduino for AS8510
The AS8510 Arduino Shield Reference Design is an add-on to the very popular Arduino Series of µC development boards. The reference design allows to measure current and voltage via the AS8510 A/D IC and to use the measured data in any Arduino sketch. Schematic and layout are available as download with no restrictions. Libraries to interface to the Arduino IDE as well as example code can be downloaded for easy setup of this board. For use of this AS8510 Arduino reference design an Arduino Uno (or similar) host board is required: http://arduino.cc/en/Main/ArduinoBoardUno
|Application Note||Arduino shield||English|
AS8510 Analog Front-End
The AS8510 data acquisition front-end IC is a virtually offset free, low noise, 2-channel measurement device. It is tailored to accurately measure battery current from mA range up to kA range in combination with a 100 µOhm shunt resistor connected in series with the battery rail. Through the second measurement channel it enables capture of either battery voltage synchronous with the current or to measure the analog output of an internal or external temperature sensor.