Demo Kit for AS726x
概要
The AS726x Demo Kit is a Windows PC-hosted evaluation environment, designed to provide the user an quick-start approach to spectral sensing. The demo kit consists of the Intelligent Spectral Interface (iSPI) board, USB/FTDI cable, and a USB stick which includes drivers, documentation and graphical user interface. The iSPI board is jumper selectable for either I2C or UART interface access via the USB/FTDI cable connection. The I2C interface presents a traditional register based device interface, while the UART interface allows high-level command access to the AS726x device features. The iSPI board includes unpopulated device pads for the installation of standard LED light sources suited to the specific spectral needs of the application. By default, the LED pads are unpopulated.
技術資料
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Application Note | Connection AS726xN None Smart Sensors | English | ||
| User Guide | AS726x-iSPI Evaluation Kit User Guide | English | ||
| User Guide | AS726x-iSPI Evaluation Kit GUI User Guide | English |
その他の情報
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Image | AS726xDemoKit Image | English |
関連製品
AS7261 Spectral Sensing Engine
AS7261
The AS7261 integrates Gaussian interference filter technology to enable chromatic white color sensor which provides direct XYZ color coordinates consistent with the CIE 1931 2° standard observer color coordinates. Additional mapping of XYZ coordinates to the x, y (Y) of the 2-dimensional color gamut and scales of the CIE 1976 u’v’ coordinate system, providing accurate correlated color temperature (CCT) measurements and color point deviation from the black body curve for white light color in the ∆u’v’ coordinate system. A near-IR channel and LED drivers with programmable currents increase application flexibility, including support for electronic shutter applications.
Control and spectral data access is implemented either through either the I²C virtual register set, or via the serial UART enabling use of the high level smart spectral command set.
Control and spectral data access is implemented either through either the I²C virtual register set, or via the serial UART enabling use of the high level smart spectral command set.
AS7264N Consumer Grade Smart XYZ + Bio-Blue + NIR Sensor
AS7264N
The AS7264N provides direct XYZ sensor data which conforms to the tri-stimulus standard observer color response of the human eye. In addition, two channels added for measurement of blue spectrum light, plus a near-IR channel enables additional application flexibility. LED drivers with programmable currents are provided for electronic shutter applications.
The AS7264N integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array.
Control and spectral data access is implemented through an I²C register set.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using this product for new designs. Please see AS7341 for possible replacement or contact your local sales representative for further information.
The AS7264N integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array.
Control and spectral data access is implemented through an I²C register set.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using this product for new designs. Please see AS7341 for possible replacement or contact your local sales representative for further information.
AS7261N - Spectral Sensor
AS7261N
The AS7261N provides direct XYZ sensor data which conforms to the tri-stimulus standard observer color response of the human eye. A near-IR channel and LED drivers with programmable currents increase application flexibility, including support for electronic shutter applications.The AS7261N integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array.
Control and spectral data access is implemented through an I²C register set.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using this product for new designs. Please see AS7261 for possible replacement or contact your local sales representative for further information.
Control and spectral data access is implemented through an I²C register set.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using this product for new designs. Please see AS7261 for possible replacement or contact your local sales representative for further information.
AS7262 Consumer Grade Smart 6-Channel VIS Sensor
AS7262
The AS7262 is a cost-effective multispectral sensor-on-chip solution designed to address spectral ID applications. This highly integrated device delivers 6-channel multispectral sensing in the visible wavelengths from approximately 430nm to 670nm with full-width half-max (FWHM) of 40nm. An integrated LED driver with programmable current is provided for electronic shutter applications.
The AS7262 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in a LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through either the I²C register set, or with a high level AT spectral command set via a serial UART.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using this product for new designs. Please see AS7341 for possible replacement or contact your local sales representative for further information.
The AS7262 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in a LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through either the I²C register set, or with a high level AT spectral command set via a serial UART.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using this product for new designs. Please see AS7341 for possible replacement or contact your local sales representative for further information.
AS7263 6-Ch NIR Spectral Sensing Engine
AS7263
The AS7263 is a digital 6-channel multi-spectral sensor for spectral identification in the near IR (NIR) light wavelengths. AS7263 consists of 6 independent optical filters whose spectral response is defined in the NIR wavelengths from approximately 600nm to 870nm with full-width half-max (FWHM) of 20nm. An integrated LED driver with programmable current is provided for electronic shutter applications.
The AS7263 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged an LGA package that provides a built in aperture to control the light entering the sensor array.
Control and spectral data access is implemented through either the I²C register set, or with a high level AT spectral command set via a serial UART.
The AS7263 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged an LGA package that provides a built in aperture to control the light entering the sensor array.
Control and spectral data access is implemented through either the I²C register set, or with a high level AT spectral command set via a serial UART.