AS7220 CCT and Lumen Maintenance Manager
Selectable CCT and lumen output maintained for the life of the luminaire
特徴
- Intelligent controller with integrated XYZ tristimulus sensor and selectable CCT presets
- Industry standard CCT presets via mode resistor, or single CCT target value in Flash
- Selectable drive modes, including PWM-switched current steering or PWM-based duty cycle management
- Remaps dimming response from percent of power to percent of rated lumen output
- 20-pin LGA 4.5mm x 4.7mm x 2.5mm, -40°C to 85°C
- Compact lighting-capable package with no added optics required
利点
- Flexible manufacturing and stocking inventories… One BOM can support multiple CCT SKUs
- Eliminates lumen/color binning penalty, significantly reducing cost of quality lighting
- Enables cost-optimized single channel drivers to deliver a precise CCT result
- 100% lumen maintenance factor over the life of the luminaire
製品パラメーター
| Sensor Type | CIE tristimulus XYZ |
|---|---|
| Applications | Closed loop CCT and lumen compensation |
| UART | No |
| Reference Networking | n/a |
| Smart Ltg Command Set | n/a |
| Lux/CCT Control | Flash and hardware configurable |
| I²C | Master for added ambient light sensing |
| Package | 20-pin LGA with aperture |
概要
Simplify single or selectable CCT luminaire and replacement lamp designs with the AS7220 calibrated CCT and lumen maintenance smart lighting manager. Closed loop calibrated tri-stimulus color sensing for direct CIE color point mapping and control enables lower precision components to produce a higher-quality single or selectable-CCT luminaire or replacement lamp.
Configurable single CCT lifetime target values are stored at the time of manufacture, allowing the AS7220 to manage independent LED strings to assure consistent CCT over time, temperature, and the full range of dimming. In addition, a selection of industry standard CCT targets can be selected via resistor configuration to enable a single BOM to satisfy multiple CCT SKUs while increasing lifetime color precision. Target lumen output lux-criteria are similarly configurable and are used by the AS7220 to map internal lux to manage LED strings to replace "percent of drive current" with "percent of rated lumen output", for all dimming operations.
Legacy controls are fully supported with direct connection to 0-10V control,. Control outputs include direct PWM management of digital LED drivers or analog 0-10V for standard dimmable drivers.
本製品は以下の用途に適しています。
- Accurate lamp to lamp CCT and lumen output
- Flexible finished goods luminaire and replacement lamp inventory approaches
- Selectable CCT, in the factory or at the customer
- Standalone color and lumen maintenance lumaires and lamps
ツール
| タイトル | カテゴリー | 見出し | 購入 |
|---|---|---|---|
| AS7221/20/11/10 Smart Lighting IntegrationKit | Application Board | Smart Lighting Integration Kit for AS722x/1x |
リソース
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Evaluation Software | AS72xx_EvalSW_v5-1-0.zip AS72xx Firmware Update using GUI | EN | ||
| App | AS72xx_App_v5-1.zip Configuration Tool for AS72xx | EN |
技術資料
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Datasheet | Document version 1-00 | English | ||
| Application Note | AS72xx External Flash program and update 10V1 | English | ||
| Application Note | AS72xx How to Flash AS72xx Firmware using | English | ||
| Application Note | True Color Luminaire Design Bluetooth Connected | English | ||
| Application Note | AS72xx How to Program AS72xx Firmware with FlashCatUSB 1V24 | English | ||
| Other Product Document | AS7220 2-slide brief | English | ||
| Other Product Document | ams Smart Lighting Short Intro-Jun 2018 | English |
お知らせ
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Product Change Notification | CN25-2019 (Customer Information AS72xx) | English |
その他の情報
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Block Diagram | AS7220 Block Diagram | English |
関連のボード
Smart Lighting Integration Kit for AS722x/1x
AS7221/20/11/10 Smart Lighting IntegrationKit
The Smart Lighting Integration Kit (SLIK) is a complete color tuning luminaire reference design solution, built around the AS7221 network-enabled smart lighting manager. The kit applies to the full AS72xx smart lighting manager, including the AS7221, AS7220, AS7211, and AS7210. The integration kit is designed to move developers rapidly from demo to proof-of-concept integration into a prototype luminaire design. It consists of two interconnected modules: the AS7221 sensor, networking and power module with integrated Bluetooth Smart (BLE); and the LED module with two strings of white LEDs for tuning (warm and cool). The SLIK includes the 2-section board, a diffuser, USB to serial interface cable, and power supply with US/European adapter. The included memory stick includes complete user documentation, GUI and drivers.
関連製品
AS7221 CCT Tuning Smart Lighting Manager
AS7221
Simplify tunable white lighting systems with the AS7221 sensor-integrated IoT smart lighting manager. The AS7221 will lower the manufactured cost of your tunable white lighting system. Closed loop calibrated tri-stimulus color sensing for direct CIE color point mapping and control enables lower precision components to produce a higher-quality tunable white luminaire or replacement lamp. Pre-calibrated to a typical 2 SDCM accuracy, this network enabled chip-scale solution uses a simple text-based smart lighting command set via the serial UART interface to deliver easy integration to standard network clients. Legacy controls are also supported with direct connection to 0-10V controls,. Control outputs include direct PWM management of digital LED drivers or analog 0-10V for standard dimmable drivers.
TSL25721 Ambient Light Sensor
TSL25721
TSL2572 device family provides ambient light sensing (ALS) that approximates human eye response to light intensity under a variety of lighting conditions and through a variety of attenuation materials. Accurate ALS measurements are the result of TAOS’ patented dual-diode technology and the UV rejection filter incorporated in the package. The operating range can be extended to 60000 LUX when the low-gain mode is use. The TSL2572 device is particularly useful for enabling automatic brightness control (ABC) in large LCD flat-panel TVs and displays by providing optimum viewing in diverse lighting conditions (daytime versus nighttime viewing) while significantly reducing energy consumption to meet the stringent ENERGY STAR requirements.