AS7038RB Vital Sign Sensor
Smart Health & Fitness Solution
特徴
- Improved optical path and integrated red+NIR filter
- 250% larger embedded photodiode
- Embedded low noise analog front end for ECG signal acquisition
- Synchronized PPG and ECG acquisition
- Low noise analog optical front end
利点
- Address all skin types and enables continous SpO2 measurements
- Improved sensitivity, higher optical noise ratio
- Electrocardiogram ECG with dry electrodes
- Enabling blood pressure measurements
- Improved HRM measurement quality
製品パラメーター
| Supply Voltage [V] | 2.7 - 5.5 |
|---|---|
| I²C Bus | I²C slave, Standard (100kHz) and Fast Mode (400kHz) |
| Temperature Range [°C] | -30 to 70 |
| Package | OLGA-22 |
| LED Configuration | - |
| Supported Algorithms | SpO2, Blood Pressure, Heart Rate, Heart Rate Variability |
概要
The operation of the AS7038RB is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038RB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV, Continuous Blood Pressure and SpO2 values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV, Blood Pressure and SpO2, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038RB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
本製品は以下の用途に適しています。
- Fitness band
- Smart watch
- Heart rate and SpO2 monitors
- Cuff less blood presssure measurements
- ECG monitoring
- Optical sensor platform
ツール
| タイトル | カテゴリー | 見出し | 購入 |
|---|---|---|---|
| AS703x Eval Kit | Application Board | Evaluation Kit for AS703x |
リソース
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Evaluation Software | AS703x_EvalSW_v2-1-0-9.zip Evaluation Software with Firmware included for AS7030B, AS7038GB, AS7038RB EVKs - For USB Version EVK | EN | ||
| Evaluation Software | AS703x_EvalSW_v1-0-1.zip AS703x_EvalSW_v1-0-1.zip Evaluation Software with Firmware included for AS7030B, AS7038GB, AS7038RB EVKs - For Bluetooth Version EVK | EN |
技術資料
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Datasheet | AS7038RB Biosensor solution with embedded ECG channel | English | ||
| Other Product Document | AS7038GB_AS7038RB Design Guidelines | English |
環境関連文書
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| RoHS Certificate | RoHS Certificate AS7038RB | English |
その他の情報
| タイプ | 品目 | 言語 | ||
|---|---|---|---|---|
| Block Diagram | AS7038RB Block Diagram | English | ||
| Image | AS7038GB Bottom view | English | ||
| Image | AS7038GB Bottom perspective view | English | ||
| Image | AS7038GB Top view | English | ||
| Image | AS7038GB Top perspective view | English |
関連のボード
Evaluation Kit for AS703x
AS703x Eval Kit
The AS703x Eval Kit is designed to evaluate all functions of the AS7030B/AS7038GB/AS7038RB biosensors and test them in various applications. For full flexibility, biosensor, temperature sensor, accelerometer and electrodes are located on the break-out board, which can be used in any application and reconnected to the main board via FPC cable. There is also the option to attach different electrodes. After breaking off the board it is also possible to connect the wristband with the PicoBlade connector. The AS703x Eval Kit works with USB connection to the PC and comes with a GUI, which enables the user to change register settings and see measurement results. The SDK contains algorithms for HRM and HRV. Any signals important for development can be probed easily at the pin headers.
関連製品
AS7026GG Vital Signs Module
AS7026GG
The operation of the AS7026 is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7026 is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The module includes the LEDs, photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the module also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7026’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7026 is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The module includes the LEDs, photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the module also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7026’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
Not Recommended for New Designs
ams-OSRAM AG is discontinuing production of this device. Final lifetime buy order must be placed by AUGUST 31, 2021. Please contact your local sales representative for further information regarding available or planned replacement options.
AS7030B Vital Sign Module
AS7030B
The operation of the AS7030B is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7030B is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The module includes the LEDs, photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the module also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7030B’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7030B is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The module includes the LEDs, photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the module also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7030B’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
AS7038GB Vital Sign Sensor
AS7038GB
The operation of the AS7038GB is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038GB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038GB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038GB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV and Continuous Blood Pressure values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV and Blood Pressure, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038GB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
Not Recommended for New Designs
ams-OSRAM AG has discontinued production of this device with immediate effect. Please see AS7038RB for possible replacement or contact your local sales representative for further information.
AS7038RB Vital Sign Sensor
AS7038RB
The operation of the AS7038RB is based on photoplethysmography (PPG) and electrocardiogram (ECG).
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038RB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV, Continuous Blood Pressure and SpO2 values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV, Blood Pressure and SpO2, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038RB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.
PPG is the most used HRM method which measures the pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. ECG is the reference for any measurement of the bio potential generated by the heart. The AS7038RB is supported by algorithms converting the PPG and ECG readings into digital HRM, HRV, Continuous Blood Pressure and SpO2 values. The cuff-less Blood Pressure Measurement has been optimized to fulfill the IEEE Std 1708-2014.
The detector includes the photo-sensor, analog front-end (AFE) and sequencer as well as application software. In addition to HRM/HRV, Blood Pressure and SpO2, the detector also enables skin temperature and skin resistivity measurements by providing interfaces to external sensors.
The AS7038RB’s low-power design and small from factor is particularly well suited to application in fitness bands, smart watches, sports watches and smart patches, in which board space is limited and in which users look for extended, multi-day intervals between battery recharges.