AS7263 6-Ch NIR Spectral Sensing Engine
6-channel NIR spectral_ID device with electronic shutter and smart interface
- Integrated interference filters directly deposited on standard CMOS silicon
- 6 near-IR channels: 610nm, 680nm, 730nm, 760nm, 810nm and 860nm, each with 20nm FWHM
- Integrated microcontroller on chip and low power consumption
- 2 integrated LED drivers
- Selectable interfaces UART or I²C
- in-factory calibrated
- Stable filter conditions over temperature and life time
- Detection of spectral fingerprints in near infrared spectrum
- Signal processing on chip, reduced hardware costs
- Sample illumination without external LED driver
- Easy connecting to mobile devices or external µController
|Sensor Type||6-channel near IR interference 600-870nm|
|Applications||Authentication, content analysis|
|I/O||I²C master or UART (mode configurable)|
|Package||20-pin LGA with aperture|
|Size [mm]||4.5 x 4.7 x 2.5|
|Supply Voltage [V]||2.7 to 3.6|
|Temperature Range [°C]||-40 to +85|
The AS7263 is a digital 6-channel multi-spectral sensor for spectral identification in the near IR (NIR) light wavelengths. AS7263 consists of 6 independent optical filters whose spectral response is defined in the NIR wavelengths from approximately 600nm to 870nm with full-width half-max (FWHM) of 20nm. An integrated LED driver with programmable current is provided for electronic shutter applications.
The AS7263 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged an LGA package that provides a built in aperture to control the light entering the sensor array.
Control and spectral data access is implemented through either the I²C register set, or with a high level AT spectral command set via a serial UART.
This product suits for the following applications:
- Product authentication
- Bank note/document validation
- Chemical analysis
- Food/Beverage safety
|AS726xDemoKit||Application Board||Demo Kit for AS726x|
|Application Data||Reference Design and Schematic AS726x 1V1||English|
|Evaluation Software||AS72xx_EvalSW_v5-1-0.zip AS72xx Firmware Update using GUI||EN|
|Evaluation Software||AS726x_EvalSW_v3-4-2.zip AS726x Spectral Sensing iSPI GUI||EN|
|Application Note||AS72xx – EEPROM Updating using I2C 1V02||English|
|Application Note||AS726x Design Considerations||English|
|Application Note||AS72xx How to Flash AS72xx Firmware using||English|
|Application Note||AS72xx How to Program AS72xx Firmware with FlashCatUSB 1V24||English|
|Quick Start Guide||AquaSensor Quick Start Guide for Hardware and Software based on AS7261||English|
|User Guide||AS726x-iSPI Evaluation Kit User Guide||English|
|User Guide||AS726x-iSPI Evaluation Kit GUI User Guide||English|
|RoHS Certificate||RoHS Certificate_AS7263||English|
|Product Change Notification||CN25-2019 (Customer Information AS72xx)||English|
|Block Diagram||AS7263 Block Diagram||English|
|Factsheet||Spectral_ID a new class of Spectral Sensing Products||English|
AS7261 Spectral Sensing Engine
Control and spectral data access is implemented either through either the I²C virtual register set, or via the serial UART enabling use of the high level smart spectral command set.
AS7262 Consumer Grade Smart 6-Channel VIS Sensor
The AS7262 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in a LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through either the I²C register set, or with a high level AT spectral command set via a serial UART.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using this product for new designs. Please see AS7341 for possible replacement or contact your local sales representative for further information.