AS89000 Transimpedance-Amplifier
4-channel programmable gain transimpedance amplifier with analog output
特点
- 4-channel resistive transimpedance amplifier
- Programmable in 8 levels - 25 kΩ to 20 MΩ, 25 nA to 20 μA, 6 to 300 kHz
- Integrated compensation of input capacities
- Temperature compensation on chip possible by using of channel 4
- Power down mode
- Output analog voltage values
优势
- Signal conditioning of sensors with current outputs
- Adjustment of the transimpedance in 8 stages per firmware
- Suitable for signal frequencies in the range of 6 to 300kHz
- COB- mounting and SMD
- Low power consumption
产品参数
| Interface | Analog voltage output |
|---|---|
| Programmable | Transimpedance in 8 stages 25kOhm - 20MOhm |
| Input Current | 25nA - 20µA |
| Sensitivity | |
| Signal Frequencies [kHz] | 6 to 300 |
| Supply Voltage [V] | 0.3 - 7.0 |
| Package | QSOP16 |
| Size [mm] | 4.90 x 6.00 x 1.75 |
| Temperature Range [°C] | -40 to 125 |
综述
The AS89000-devices are a family of integrated circuits of programmable gain transimpedance amplifiers with 4 channels per IC (more custom specific, on request).
The AS89000-devices are mainly used for signal conditioning of sensors with current outputs. They are especially suitable for connection of photodiodes of array and row sensors. The possibility to adjust the transimpedance in 8 stages is a special feature. The adjustment is made by programming three pins and is valid for all channels together. The device packages (naked chip on request) are RoHS conform and optimized for COB- mounting and SMD.
本产品适用于以下应用:
- Industrial automation
- Process control
- Spectral sensing
技术文档
| 类别 | 描述 | 语言 | ||
|---|---|---|---|---|
| Datasheet | Document version 3V01 | English |
通知
| 类别 | 描述 | 语言 | ||
|---|---|---|---|---|
| EoL Notification | AS89000, AS89010 (Oct-2022) | English |
相关产品
AS73211 - JENCOLOR® Digital XYZ Sensor
AS73211
The AS73211 is a digital XYZ sensor with I2C interface for relative and absolute color measurement and control. The combination of True Color XYZ sensitized photodiodes with a filter function based on the standard CIE 1931/DIN 5033 (human eye perception) and used interference filter technology as leading and most accurate technology of three-range sensors makes the AS73211 more accurate than RGB sensors and guarantee this function without spectral changings over lifetime. The AS73211 is designed with a high dynamic range to measure any light in the visible range (VIS) in environments from sunlight to dark rooms, dimmed LEDs, or dark colored monitors.
AS89010 Current-to-Digital Converter
AS89010
The AS89010 processes via charge-balance method and converts lowest photocurrents at high accuracy. Its full-scale range can be customized to specific applications. Sensitivity of 20 fA/LSB at a dynamic of 1 to 1,000,000. The IC is temperature compensated and features the possibility of external synchronization.
AS89020 Converter with digital output
AS89020
The AS89020 is a 12-bit, 4-channel, current input Analog-to-Digital Converter (ADC). It combines current-to-voltage (TIA) and analog-to-digital (AD) conversion, so that 4 separate current output devices (e.g. photodiodes) can be directly connected to its inputs and digitized.
For each of the 4 inputs the AS89020 provides an input amplifier with a track and hold circuit. The outputs of the track and hold stages are serial converted to 12-bit digital words using an analog-to-digital converter (ADC).
For each of the 4 inputs the AS89020 provides an input amplifier with a track and hold circuit. The outputs of the track and hold stages are serial converted to 12-bit digital words using an analog-to-digital converter (ADC).
Not Recommended for New Designs
ams-OSRAM AG is discontinuing production of this device. Final lifetime buy order must be placed by June 30, 2021. Please contact your local sales representative for further information.
AS73211 - JENCOLOR® Digital XYZ Sensor
AS73211
The AS73211 is a digital XYZ sensor with I2C interface for relative and absolute color measurement and control. The combination of True Color XYZ sensitized photodiodes with a filter function based on the standard CIE 1931/DIN 5033 (human eye perception) and used interference filter technology as leading and most accurate technology of three-range sensors makes the AS73211 more accurate than RGB sensors and guarantee this function without spectral changings over lifetime. The AS73211 is designed with a high dynamic range to measure any light in the visible range (VIS) in environments from sunlight to dark rooms, dimmed LEDs, or dark colored monitors.
AS89010 Current-to-Digital Converter
AS89010
The AS89010 processes via charge-balance method and converts lowest photocurrents at high accuracy. Its full-scale range can be customized to specific applications. Sensitivity of 20 fA/LSB at a dynamic of 1 to 1,000,000. The IC is temperature compensated and features the possibility of external synchronization.
AS89020 Converter with digital output
AS89020
The AS89020 is a 12-bit, 4-channel, current input Analog-to-Digital Converter (ADC). It combines current-to-voltage (TIA) and analog-to-digital (AD) conversion, so that 4 separate current output devices (e.g. photodiodes) can be directly connected to its inputs and digitized.
For each of the 4 inputs the AS89020 provides an input amplifier with a track and hold circuit. The outputs of the track and hold stages are serial converted to 12-bit digital words using an analog-to-digital converter (ADC).
For each of the 4 inputs the AS89020 provides an input amplifier with a track and hold circuit. The outputs of the track and hold stages are serial converted to 12-bit digital words using an analog-to-digital converter (ADC).
Not Recommended for New Designs
ams-OSRAM AG is discontinuing production of this device. Final lifetime buy order must be placed by June 30, 2021. Please contact your local sales representative for further information.