Programming Board for AS5115
일반 설명
The AS5115-PB programming board is used for quick programming the AS5115 automotive position sensor without soldering due to its ZIF socket. This board must be used in combination with the SD4Y-Programmer, which provides the chip with the adequate OTP programming commands.
Please note that AS5115 is not recommended for new designs.
기타 정보
| 유형 | 설명 | 언어 | ||
|---|---|---|---|---|
| Image | AS5115-PB Image | English |
관련 제품
AS5115 Position Sensor Sin/Cos Output
AS5115
The AS5115 is a contactless rotary position sensor for accurate angular measurement over a full turn of 360° and over an extended ambient temperature of -40°C to +150°C. Based on an integrated Hall element array the angular position of a simple two-pole magnet is translated into analog output voltages. The angle information is provided by means of buffered sine and consine voltages via a SSI Interface.
With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using AS5115 for new designs. A new product version is under development and will be announced soon.
Please contact your local sales representative for further information regarding available or planned replacement options.
With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
Not Recommended for New Designs
ams-OSRAM AG does not recommend using AS5115 for new designs. A new product version is under development and will be announced soon.
Please contact your local sales representative for further information regarding available or planned replacement options.
관련 보드
Production Programmer SD4Y
SD4Y-PP
The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards.
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)