AS5116 Position Sensor Sin/Cos Output
On-axis magnetic position sensor with analog sine/cosine outputs
Please note that the shop functionality is still accessible via the Shop Now tab on ams.com product pages Looking for more information? Visit the new product page on ams-osram.com to find all product related information, documents and software.
Related boards
Socket Board for AS5116
AS5116 Socket Board
The AS5116-SO_EK_SB socket board is used for quick programming of the AS5116 magnetic rotary position sensors without soldering due to its ZIF socket. This board is used in combination with the USB I&P Box or the SD4Y production programmer.
The PCB offers 2 connecting options: The 5-pin dual-row connector on the left side for connecting to the USB I&P Box and the 10-pin dual-row connector on the right side for connecting to the SD4Y Production Programmer. Furthermore, 8-pin header on top gives access to analog signals and GND signals. A ZIF Open-Top-Socket for SOIC8 packages is mounted in the middle. Pin 1 of the IC is indicated by a small dot on the left bottom corner of the socket or by the label on the PCB.
All passive components needed for proper operation are included on the PCB. Only a power supply mode of 5 V is possible.
Adapter Board for AS5116
AS5116 Adapter Board
The AS5116 Adapter Board is a small PCB allowing simple and quick testing or evaluation of the AS5116 magnetic position sensor without the need to build a test fixture or design an own PCB. The PCB can be connected either to an external microcontroller or to the USB
I&P Box.
The connector, 2x5 pin header (not populated), is included to this kit and is required for power supply as well as UART and analog interface.
Evaluation Kit for AS5116
AS5116 Evaluation Kit
