Software design for Embedded Systems (ARM Microcontroller) in the area of 3D sensing
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Firmware (m/f/d)
|
Austria |
Research & Development |
2020-02-27 |
Software design for Embedded Systems (ARM Microcontroller) in the area of 3D sensing
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Firmware (m/f/d)
|
Austria |
Research & Development |
2020-02-27 |
Software design for 3D camera driver for Android platform
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Driver (m/f/d)
|
Austria |
Research & Development |
2020-02-27 |
Software design for GUI for 3D camera
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - GUI (m/f/d)
|
Austria |
Research & Development |
2020-02-27 |
Technical support interface for Marketing, Product Management, FAE, FSE and customers (3rd level and design-in support)
Drafting application notes, articles and presentations
Setup of product presentations and trainings for customers and internal staff
Specification of reference applications for target markets including system architectures, circuits and components
Development of PCB reference designs including testing, characterization and validation
Measurements setup and methods based on custom automation systems
Performance analysis of ams and competitive products. Tear down of end user devices including evaluation reports
Involvement on all technical aspects of products in production, and therefore, being an integral part of the definition and development of future products
Support Marketing and Engineering in work statement preparation
Travel up to 25%
|
Application Engineer (m/f/d)
|
Austria |
Marketing & Strategy |
2020-02-27 |
Identify key trends in the Automotive HMI market, and understand the relevant solutions (driver monitoring, gesture control, interior monitoring)
Define strategy for selected segments/ products / solutions
Gather and consolidate market intelligence, market trends, market needs
Create and present business cases for new products/projects coordinated with Product Management, Engineering, Project Management and Executives
Own Product launch plans (overall time schedule; PR, samples, key projects/ customers, medias, events, sales support packages, webinars, PSP - support packages (documentation, SW, demo)
Define go-to-market strategy (partners, distributors, sales models, ecosystem players, influencers, value added resellers, cross BL synergies)
Creating Product promotional material (ppt, leaflets, on-line, …), fighting guides and educate customers and Field on products, solution and capabilities
Content provision towards Marcom
Represent the capabilities (features and roadmap) to customers and Sales and within AMS
Ownership of overall pricing strategy, positioning, messaging including pricing execution (price lists, quoting, escalation approval/ negotiation, claims)
Own Design-win pipeline (define target and track it)
Deliver forecast (RFF, LV, LTP – insert correct AMS terms)
|
Segment Manager Automotive HMI (m/f/d))
|
Switzerland |
Marketing & Strategy |
2020-02-27 |
Identify key trends in the Automotive HMI market, and understand the relevant solutions (driver monitoring, gesture control, interior monitoring)
Define strategy for selected segments/ products / solutions
Gather and consolidate market intelligence, market trends, market needs
Create and present business cases for new products/projects coordinated with Product Management, Engineering, Project Management and Executives
Own Product launch plans (overall time schedule; PR, samples, key projects/ customers, medias, events, sales support packages, webinars, PSP - support packages (documentation, SW, demo)
Define go-to-market strategy (partners, distributors, sales models, ecosystem players, influencers, value added resellers, cross BL synergies)
Creating Product promotional material (ppt, leaflets, on-line, …), fighting guides and educate customers and Field on products, solution and capabilities
Content provision towards Marcom
Represent the capabilities (features and roadmap) to customers and Sales and within AMS
Ownership of overall pricing strategy, positioning, messaging including pricing execution (price lists, quoting, escalation approval/ negotiation, claims)
Own Design-win pipeline (define target and track it)
Deliver forecast (RFF, LV, LTP – insert correct AMS terms)
|
Segment Manager Automotive HMI (m/f/d))
|
Germany |
Marketing & Strategy |
2020-02-27 |
Working in a multidisciplinary team being responsible of the boards design for opto-electronic sensors
Assist in designing and developing PCB
Use ECAD in preparing PCB assembly and schematic
Design PCB layouts to develop high-speed and reliable circuits
Analyze and resolve design related issues in a timely manner
Work with project team in understanding circuit requirements and limitations
Working in a multidisciplinary team being responsible of the boards design for opto-electronic sensors
Develop design documentations and requirements specifications for assigned projects
Stay updated with latest design techniques
Perform component placement and maintain integrity between components
Sharing the responsibility in Product Design team with all the members
Ongoing support to other members of the AMS design team locally and abroad
Contributing to the ongoing creation of a positive, productive work environment
Follow departmental policies and safety regulations
Must be willing to travel up to 20% of the work time
|
Staff Engineer, PCB Designer
|
Singapore |
Research & Development |
2019-10-09 |
We are looking for intern with expertise in deep learning. Ideally, you are currently enrolled in a higher-education institute and looking to develop your hands-on experience with PyTorch and deep learning approaches. As part of the R&D team, you will work with other researchers to implement, train and evaluate machine learning algorithms and use our research infrastructure.
Conduct a 6 months project under the supervision of more senior staff
Implement a demonstrator
Help with literature survey
|
Master Student Internship
|
Switzerland |
Research & Development |
2020-02-27 |
We are looking for intern with expertise in deep learning. Ideally, you are currently enrolled in a higher-education institute and looking to develop your hands-on experience with PyTorch and deep learning approaches. As part of the R&D team, you will work with other researchers to implement, train and evaluate machine learning algorithms and use our research infrastructure.
Conduct a 6 months project under the supervision of more senior staff
Implement a demonstrator
Help with literature survey
|
Master Student Internship
|
Switzerland |
Research & Development |
2020-02-27 |
Develop new processes and technologies for micro optics manufacturing.
Technology transfer to manufacturing sites (Singapore).
Willingness for sporadic travels to Singapore.
Contribute to several projects in parallel.
Cross team & cross divisional collaboration.
Coordination of R&D projects.
Manage suppliers for materials and/or equipment development.
Perform experiments in clean room and evaluate data.
|
Staff engineer, R&D
|
Switzerland |
Research & Development |
2020-02-27 |
Develop new processes and technologies for micro optics manufacturing.
Technology transfer to manufacturing sites (Singapore).
Willingness for sporadic travels to Singapore.
Contribute to several projects in parallel.
Cross team & cross divisional collaboration.
Manage suppliers for materials and/or equipment development.
Manage suppliers for materials and/or equipment development.
Perform experiments in clean room and evaluate data.
|
Staff engineer, R&D
|
Switzerland |
Research & Development |
2020-02-27 |
Software design for 3D camera driver for Android platform
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Driver
|
Switzerland |
Research & Development |
2020-02-27 |
We are looking for an experienced applied researcher with expertise in deep learning complemented by a broad knowledge in computer vision. Ideally, you have hands-on experience with PyTorch and a good understanding of deep learning approaches. As part of the R&D team, you will work with other researchers to implement, train and evaluate machine learning algorithms, as well as closely interact with the software development team for technology transfer into our products.
Lead research project related to sensing
Develop machine learning solutions
Deliver modules for integration in demo
Prepare technical reports and presentations for external and internal communication
|
Senior Machine Learning Researcher
|
Switzerland |
Research & Development |
2020-02-27 |
We are looking for an experienced C/C++ developer with expertise in algorithm optimization and smartphone hardware. You have hands-on experience with algorithm development. Ideally you would contribute with your ideas to improve our algorithms accuracy and speed. As part of the development team, you will work with our machine learning software engineers to transfer and port machine learning algorithms on mobile platforms.
Optimize and port C++ algorithms to mobile platforms
Design, implement and port algorithms to GPU and DSP
Port machine learning algorithms from research to production ready implementation
Profile production code for performance reporting
|
Staff Engineer, C++ Software
|
Switzerland |
Research & Development |
2020-02-27 |
We are looking for a C++ developer with expertise in algorithm optimization and smartphone hardware. You have hands-on experience with algorithm development. Ideally you would contribute with your ideas to improve our algorithms accuracy and speed. As part of the development team, you will work with our machine learning software engineers to transfer and port machine learning algorithms on mobile platforms. We will also develop and maintain demonstrations of our technology running on Android.
Optimize and port C++ algorithms to mobile platforms
Port machine learning algorithms from research to production ready implementation
Profile production code for performance reporting
Develop and maintain Android applications
|
Engineer, C++ Software
|
Switzerland |
Research & Development |
2020-02-27 |
Perform numerical finite element simulations of IC packages in order to analyze and understand their thermo-mechanical behavior and identify design improvements and novel solutions.
Develop solutions to problems utilizing formal education and judgment.
Perform data analysis, organization of results and redaction of detailed simulations reports
Analyze compliance with product requirements, identify and mitigate areas of risk
Report simulation results and conclusion to both internal and external customers
International travel may be required
|
Engineer, FEA Simulation
|
Switzerland |
Research & Development |
2020-02-27 |
Managing the portfolio of 3D system solutions (defining the product line strategy and sponsoring the product roadmap)
Defining the right 3D solutions with the right features for the targeted applications (value proposition, product specification, cost target, demo requirement)
Coordination between Marketing, Program Management, Architecture and Operations during project execution (e.g. handling trade-offs)
Driving competitor analysis and benchmarking
Scouting new technologies and consolidate technology trends
Driving product innovation and deployment of IP developments
Defining product launch plan and drive product roadshows
Creating technical product collaterals (datasheet, application notes…)
Supporting sales and customer product training
|
Product Manager, 3D System Solutions
|
Switzerland |
Marketing & Strategy |
2020-02-27 |
Responsible for technical level 2 customer support for CSS products
Development of PCB reference designs including testing, characterization and validation
Develop and perform measurement setups and methods based on LABview and Matlab automation
Prepare application notes, articles and technical presentations
Perform analysis of own and competitive products including evaluation reports
On-site customer design-in support
Conduct customer technical training
Readiness to travel 25%
|
Staff Engineer, Hardware Application
|
China |
Marketing & Strategy |
2019-10-25 |
Technical support interface for Marketing, Product Management, FAE, FSE and customers (2nd level and design-in support)
Development of software and firmware for embedded systems, including Android platforms
Embedded driver development in various sensor hub frameworks and mobile SOC platforms
Responsible for software architecture and design decisions for overall software system design and architecture
Development of reference systems and demos
Measurements setup and methods based on custom automation systems
Drafting of customer facing documentation, such as application notes, articles, and presentations
Development and presentation of training materials for both internal staff and external customers
Specification of reference applications for target markets including system architectures, circuits, and components
Performance analysis of ams and competitive products, including tear-downs and comparative analysis
Support Marketing and Engineering in new device definition and work statement preparation
Travel up to 30%
|
Senior Staff Engineer, Application Engineering
|
China |
Customer & Sales Support |
2019-09-18 |
Support IQC Engineer with day to day IQC activities, including scope check, defect verification and data compilation.
Support IQC engineer to supervise QA inspectors to ensure all the inspections are performed according to SOP
Support engineer on IQC set up and maintain equipment & parts used for measurement.
Setup equipment & test program for incoming inspection.
Provide training to QA inspectors to perform inspection.
|
Technician, IQC
|
Singapore |
Quality |
2020-02-24 |
To play the role of a process owner back-end area.
To provide daily monitoring of tool/process to ensure stability.
To participle in team to develop action plans to reduce long-term stability issues
Monitor CpK and ownership of process control improvement plans
Lean manufacturing: identifying opportunities to eliminate waste within own tool-set/process- operator time, process simplification, qualification optimization
Reporting of scrap/rework and ownership of scrap/rework reduction plans
To take ownership and follow through actions and progress of related yield excursions on associated process. Be the focal point and send updates on associated scrap incidents
Support cost reduction programs associated with process and materials.
Responsible for process training
Write detailed operation procedures for Tool Operation/OCAPS
|
(Tech) Graduate Process Engineer
|
Singapore |
Operations & Manufacturing |
2020-01-27 |
Run FEM Simulations to predict EMC product performance
Provide EMC/EMI support to on-/off-site HW application teams
Perform EMC/EMI troubleshooting and provide recommendations for mitigation
Execute EMC verification and validation tasks during product development phase
Develop EMC simulation methodologies
Develop interference models to identify coupling mechanisms to mitigate power/signal integrity issues
Translate customer requirements into product EMC requirements to enable EMC aware design concepts
Create EMC test concepts, procedures, control plans, reports and guidelines.
Document work products according corporate quality requirements
|
EMC Engineer
|
Switzerland |
Research & Development |
2020-02-07 |
• Schedule and conduct regular manufacturing audits to ensure the manufacturing control plans are aligned to customer requirement
• Ensure discrepancies and non-conformance are corrected promptly
• Manage the ESD buyoff in the production areas through periodical check to ensure compliance.
• Fan out the internal/VOP actions and response to the VOP with 8D analysis
• Conduct periodically Warehouse/5S audit to ensure compliance
• Review the specification, control plan, unit process FMEA, and ECN.
• Drive and coordinate for the Zero Defects initiative to instill ZD mindset to all staff and strengthening the “Quality Basics”
|
Staff Engineer
|
Singapore |
Quality |
2020-02-24 |
Support manufacturing line on all process related issue by providing engineering dispositions
Monitor process on a regular basis of process behavior and prospectively identify process issues
Follow and improve reaction mechanisms and procedures for process control conditions
Determine root cause, implement corrective and improvement actions
Identify training needs and prepare training materials for production trainers and operators
Establish and improve process condition and technology; Set up process parameters of equipment
Evaluation, promotion and planning of new equipment / materials
|
(TECH)Process Engineer
|
Singapore |
Operations & Manufacturing |
2020-02-24 |
Support manufacturing line on all process related issue by providing engineering dispositions
Monitor process on a regular basis of process behavior and prospectively identify process issues
Coordinate training requirements and conduct training
Assist engineer in the machine/process qualification; as well as carry out engineering project and DOE
Able To perform 12 hour rotating shift
|
(TECH)Process Junior Engineer
|
Singapore |
Operations & Manufacturing |
2020-02-24 |
Responsible for new process development, yield improvement, cost saving, generate technical report
Qualification of new equipment, direct/in direct material, tooling to meet business need
Interface with MP to ensure smooth transition of new product from NPD to MP
Strong technical analysis competency with use of analysis tools like JMP, mini-tab, etc
Knowledge of FMEA, fish-bond analysis, as well as 8D report for customer complaint
Involve in new process development in backend process, like die attach, screen printing, etc
|
Staff Process Development Engineer
|
Singapore |
Research & Development |
2020-02-24 |
To provide report to reduce test cost and cycle time, improve test efficiency and resolve issues related to testing
To co-work with engineer to carry out evaluation/ DOE run and data collection.
To monitor tester performance and provide first level troubleshooting & fix.
To assist in daily production line sustaining related activities; attend to production hold lots and first level investigation.
|
Test Shift Technician
|
Singapore |
Operations & Manufacturing |
2020-02-24 |
Update and provide executive level bridging to all capital needs for product costing based on customer forecasts (and what ifs), monthly consensus forecasts, budgets and ad hoc scenario planning. Clearly articulate justifications, risks and opportunities for different budget versions.
Liaise with key stakeholders in BE Operations for capital needs (multi site)
Manage the team to Identify opportunities for re-use of equipment from existing pool of resources and link up with multi sites on capital minimization of spend.
Seek approval of capital needs per product ramps (new and existing) per IE capacity needs to support demand forecasts.
Ensure capacity ramp plans are met and accountable to external and internal companies on progress of status.
Drive forecast accuracy of Plan vs Actual of capital spend.
Develop and implement Capital prioritization process for BE Ops (cover IE, Operations, IT, Fac, Improvement categories)
Main contact liaison for Finance Costing/ Budgeting exercise.
|
Manager (IE Capacity Planning)
|
Singapore |
Operations & Manufacturing |
2020-02-24 |
Candidate will be stationed in Thailand.
Monitors the overall performance of ams suppliers in Thailand with regards to production and technology development (Analyzes production processes, identifies areas for improvement & sets up / reviews relevant process KPIs)Supplier on-site interface to ensure smooth production
Deal with maverick lots, low yield or in-line excursions, risk assessment and lot disposition
Attends major production & process quality related issues
Drives, manages and coordinates issues at suppliers and internal ams site
Works closely with ams various engineering departments and Product Reliability Team regarding qualification of new devices, technologies, packages and changes in the process flows
Performs process and quality audits following TS16949 and VDA 6.3 standards
Prepares and attends customer audits at supplier sites
Drives continuous improvement programs to establish predicable and reliable manufacturing capabilities at ams suppliers
Ensures that products and services are fit for purpose and meet both external & internal requirements and customer expectations
Actively involve early in product design stage to identify quality concerns or risks
|
Senior Staff Engineer, Supplier Quality
|
Thailand |
Quality |
2020-02-24 |
Perform activities for the development, characterization, and implementation of new test equipment, jigs and fixtures, test concepts, methods and programs into production
Develop fixtures and jigs for testing DUT and support customers on all test related matters
Develop and perform test program generation and optimization for new customers' products
Develop and execute test strategy for new products including design for test analysis and feedback
Develop new techniques for test handling and fixtures, using experimental design and statistical method, evaluate failure data to find root cause and implement sound engineering solution
Possess the ability to define problems collects data, establish facts, and draw valid conclusions
Define processes and equipment requirements and specifications used in the manufacture, fabrication and evaluation of sensor devices
Review product requirements with product designers to ensure compatibility with processing and testing methods with design goals
Recommend and prepare changes, additions, and modifications which will optimize processes, enhance yields, reduce costs and improve the manufacture of product / processes
Be a technical lead in a diverse team environment that includes interactions with suppliers, internal and external customers and production personnel
Able to travel within short notice period
|
Engineer, test development
|
Singapore |
Research & Development |
2020-02-23 |
Develop and implement new test concepts and methods, programs, test jigs, fixtures and test equipment for new products testing which includes Optical.
Develop test strategy for new products and new techniques for test handling and fixtures, using experimental design and statistical method, evaluate failure data to find root cause and implement sound engineering solution
Define processes and equipment requirements and specifications used in the manufacture, fabrication and evaluation of sensor device
Review product requirements with product designers to ensure compatibility with processing and testing methods with design goals
Be a technical lead in a diverse team environment that includes interactions with suppliers, internal and external customers
Able to travel within short notice period
|
Engineer, test development
|
Singapore |
Research & Development |
2020-02-23 |
• Develop and implement new test concepts and methods, programs, test jigs, fixtures and test equipment for new sensor/optical products testing.
• Develop test strategy for new products and new techniques for test handling and fixtures, using experimental design and statistical method, evaluate failure data to find root cause and implement sound engineering solution.
• Define processes and equipment requirements and specifications used in the manufacture, fabrication and evaluation of sensor devices.
• Review product requirements with product designers to ensure compatibility with processing and testing methods with design goals.
• Be a technical lead in a diverse team environment that includes interactions with suppliers, internal and external customers.
Work with project team, supplier and customer to develop the tester for the new products which meet all specified Test requirements within the project time line.
|
Engineer, test development
|
Singapore |
Research & Development |
2020-02-23 |
• Perform activities for test development, characterization, and implementation of new test equipment, jigs and fixtures, test concepts, methods and programs into production.
• Develop fixtures and jigs for testing and support customers on all test related matters
• Develop and perform test program generation and optimization for new customers' products
• Develop and execute test strategy for new products including design for test analysis and feedback
• Develop new techniques for test handling and fixtures, using experimental design and statistical method, evaluate failure data to find root cause and implement sound engineering solution
• Define processes and equipment requirements and specifications used in the manufacture, fabrication and evaluation of sensor devices
• Review product requirements with product designers to ensure compatibility with processing and testing methods with design goals
• Develop improvement plans programs to improve test yields and tester efficiency.
• Recommend and prepare changes, additions, and modifications which will optimize processes, enhance yields, reduce costs and improve the manufacture of product / processes
• Be a technical lead of the project assigned and interact with suppliers, internal and external customers and production personnel
- Ability to work under pressure to meet urgent customer commitments. Able to work outside working hours if required, to complete the needed deliverables.
|
Engineer, test development
|
Singapore |
Research & Development |
2020-02-23 |
Develop and implement new test concepts and methods, programs, test jigs, fixtures and test equipment for new products testing which includes Optical.
Develop test strategy for new products and new techniques for test handling and fixtures, using experimental design and statistical method, evaluate failure data to find root cause and implement sound engineering solution
Define processes and equipment requirements and specifications used in the manufacture, fabrication and evaluation of sensor device
Review product requirements with product designers to ensure compatibility with processing and testing methods with design goals
Be a technical lead in a diverse team environment that includes interactions with suppliers, internal and external customers
Able to travel within short notice period
|
Engineer, test development
|
Singapore |
Research & Development |
2020-02-23 |
Test development for New Product development. To develop and implement new test concepts and methods, programs, test jigs, fixtures and test equipment for sensor/optical products testing
• Develop test strategy for new products and new techniques for test handling and fixtures, using experimental design and statistical method, evaluate failure data to find root cause and implement sound engineering solution.
• Define processes and equipment requirements and specifications used in the manufacture, fabrication and evaluation of sensor devices.
• Review product requirements with product designers to ensure compatibility with processing and testing methods with design goals.
• Be a technical lead in a diverse team environment that includes interactions with suppliers, internal and external customers.
Work with project team, supplier and customer to develop the tester for the new products which meet all specified Test requirements within the project time line.
The developed tester for the new products can be manufactured to support mass production usage
|
Engineer, test development
|
Singapore |
Research & Development |
2020-02-23 |
• To understand new product requirement and establish Inspection recipe base on product specification.
• Establish defect criteria and standard for new product quality
• Drive first time yield improvement, over kill rate and offline review reduction
• Support yield and defect pareto reporting and monitoring support
• Conduct Periodic Measurement System Analysis and machine correlation
• Explore new inspection methodology and machine inspection capability
• Source, benchmark and qualify new inspectio
|
Engineer AOI development
|
Singapore |
Research & Development |
2020-02-23 |
Take lead to drive engineering build yield improvement providing findings, analysis data and work with cross functional teams on resolutions to meet product specification and target yield.
Participate actively in product and process design development/characterization activities to meet project schedule and yield/cpk expectation.
Facilitate root cause identification and ensure corrective action implementation.
Work closely with internal and external teams on design developmental issues.
|
Staff Engineer, Process Integration
|
Singapore |
Research & Development |
2020-02-23 |
Lead and drive products life cycle from new product concept to mass production
Responsible for product documentation, BOM, product specs, process control plan etc
Involvement in product testing and methodology setup.
Customer interfacing for technical discussions
Liaise with manufacturing to ramp product into volume production at acceptable yield levels
Responsible for product performance analysis (JMP, Minitab, Failure analysis methodology, etc)
|
Staff Engineer, Product Development
|
Singapore |
Research & Development |
2020-02-23 |
Responsible for the product development cycle and its activities, involved from design stage to the transfer to production.
Lead and participate in technical analysis, discussion and meetings.
Manage and drive cross functions product development activities to achieve targeted milestones.
Be the technical lead in customer’s meetings, and support the team in managing customer’s expectation and requirement.
|
Staff Engineer, Product Development
|
Singapore |
Research & Development |
2019-12-05 |
- Define device, technology design rules and target specifications.
- Create process flows with process specifications.
- Process module development and characterization
- Define structures for process integration and process module development.
- Design statistical experiments and analyze results to optimize device architecture and/or process modules.
- Coordinate process unit and process module development.
- Drive process and device optimization.
|
Staff engineer Process Development
|
Singapore |
Research & Development |
2020-02-21 |
- Define device, technology design rules and target specifications.
- Create process flows with process specifications.
- Process module development and characterization
- Define structures for process integration and process module development.
- Design statistical experiments and analyze results to optimize device architecture and/or process modules.
- Coordinate process unit and process module development.
- Drive process and device optimization.
|
Staff engineer Process Development
|
Singapore |
Research & Development |
2020-02-21 |
- Define device, technology design rules and target specifications.
- Create process flows with process specifications.
- Process module development and characterization
- Define structures for process integration and process module development.
- Design statistical experiments and analyze results to optimize device architecture and/or process modules.
- Coordinate process unit and process module development.
- Drive process and device optimization.
|
Engineer Process Development
|
Singapore |
Research & Development |
2020-02-21 |
Responsible for Wafer Stacking process development for new product design that includes epoxy jetting/dispensing, screen printing and alignment processes.
Develop and qualify effective stacking process to meet product design requirements.
Equipment and material selection for new product design.
Design tools and fixturing to enhance wafer stacking process.
Work with suppliers for resolution of machine and material related issues in timely manner.
Preparation of handover documents to OPS.
|
Staff Engineer, Process development
|
Singapore |
Research & Development |
2020-02-21 |
Responsible for Lens Replication process development for new product design that includes epoxy jetting/dispensing and alignment processes.
Develop and qualify effective process to meet product design requirements.
Equipment and material selection for new product design.
Design tools and fixturing to enhance replication process.
Work with suppliers for resolution of machine and material related issues in timely manner.
Preparation of handover documents to OPS group.
|
Staff Engineer Process Development
|
Singapore |
Research & Development |
2020-02-21 |
Responsible for Lens Replication process development for new product design that includes epoxy jetting/dispensing and alignment processes.
Develop and qualify effective process to meet product design requirements.
Equipment and material selection for new product design.
Design tools and fixturing to enhance replication process.
Work with suppliers for resolution of machine and material related issues in timely manner.
Preparation of handover documents to OPS group.
|
Staff Engineer, Process development
|
Singapore |
Research & Development |
2020-02-21 |
Successful completion of delegated work packages or sensor products, Ensure good preparation of project documentation, Take decision on Technical matters, To mentor and advise engineers on technical matters, To stay abreast of technical innovation in own field of expertise & “state of the art”, Provide support to Production ensure good product launch and optimal cost effective solutions.
Subject Matter Expert in process development such as Dicing, Die attach, Wire-bond, SMT
Understanding of product failure debugging such as failure analysis (FA), SEM, EDX , FIB
Proficient in problem solving methodology
Project management skills
Understanding of optics and sensor technology is added advantage
|
Staff Engineer, Package Development
|
Singapore |
Research & Development |
2020-02-21 |
Lead and drive products life cycle from new product concept to mass production
Responsible for product documentation, BOM, product specs, process control plan etc
Involvement in product testing and methodology setup
Customer interfacing for technical discussions
Liaise with manufacturing to ramp product into volume production at acceptable yield levels
Responsible for product performance analysis (JMP, Minitab, Failure analysis methodology, etc)
|
Staff Engineer
|
Singapore |
Research & Development |
2020-02-21 |
Software design for 3D camera driver for Android platform
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Driver
|
India |
Research & Development |
2020-02-21 |
Software design for Embedded Systems (ARM Microcontroller) in the area of 3D sensing
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Firmware
|
India |
Research & Development |
2020-02-21 |
Software design for Embedded Systems (ARM Microcontroller) in the area of 3D sensing
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Firmware
|
India |
Research & Development |
2020-02-21 |
Software design for Embedded Systems (ARM Microcontroller) in the area of 3D sensing
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Firmware
|
India |
Research & Development |
2020-02-21 |
Software design for Embedded Systems (ARM Microcontroller) in the area of 3D sensing
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Firmware
|
India |
Research & Development |
2020-02-21 |
Successful completion of delegated work packages or sensor products, Ensure good preparation of project documentation
Take decision on Technical matters, To mentor and advise engineers on technical matters, To stay abreast of technical innovation in own field of expertise & “state of the art”, Provide support to Production ensure good product launch and optimal cost effective solutions.
Subject Matter Expert in process development such as Dicing, Die attach, Wire bond, SMT
Involved in Package qualifications with assembly process: fcBGA, or QFN or WLCSP or Fan-out WLP
Understanding of product failure debugging such as failure analysis (FA), SEM, EDX , FIB
Proficient in problem solving methodology and Project management skills
Understanding of optics and sensor technology is added advantage
|
Staff Engineer, Package Development
|
Singapore |
Research & Development |
2019-10-08 |
|
|
Analog Design Engineer
|
Austria |
Research & Development |
2020-02-01 |
• Lead team of product application engineers to expedite productization flow and improve maturity of product before and during customer engagements
• Hands on involvement to define product/solution requirements from system level
• 2nd and 3rd line of customer projects and providing technical support including on-site visit to customers
• Represent customer needs in internal product teams and drive product initiatives that apply to customer engagements.
• Participating in creating documents and white papers for customer integration
• Provide competitive information by driving teardown and electrical analysis
• Support product development with EVM, reference design, demonstrations, and software from design phase to characterization.
• Training ams' application engineering and sales teams on demos/reference
|
Manager HW Application
|
Germany |
Research & Development |
2020-02-19 |
What You’ll Do:
Responsibilities include:
• Contributing to all phases of software & software test development, from requirements gathering through implementation, automation and sustaining
• Software testing for embedded platforms including Linux drivers, firmware, libraries and applications
• Listening to internal users, team members, and customers to help encourage open collaboration
• Submitting and commenting on pull requests
• Integrating automation testing into CI/CD (Jenkins)
|
Software Engineer in Test (m/f/d)
|
Germany |
Research & Development |
2020-02-19 |
Develop good understanding and knowledge of laser dicing capabilities
Identify and solve challenges in existing processes
Hands on experience with recipe creation on dicer tools
Strong in SPC tools like JMP, Box plot, Excel charts
Monitor process performance indices on qualified processes and establish good controls to maintain process performance
Oversee and ensure all critical nodes for quality indices are met
Start up new equipment processes which involve process characterization and development
Ensure productivity improvement through process changes, documents, as well as implement process capability and work with equipment engineers to maximize productivity of the equipment
Set up SPC, control plan, FMEA and work instructions for production
Organize and oversee training for AEs/Technicians to upgrade their technical skills
|
Engineer, Dicing Process
|
Singapore |
Operations & Manufacturing |
2020-01-31 |
Order management and maintenance
Vendor management and maintenance
Payment management
Process and Productivity improvement
System IT improvement project
|
Specialist, Shared service
|
Singapore |
Operations & Manufacturing |
2020-02-19 |
Present or demonstrate industrial and medical products/applications
Specify reference apps for target markets, including system architectures, circuits and components
Conduct performance analysis of own and competitors’ products, including evaluation reports
Support selected distributors or representative FAEs & FSEs and provide technical training and customer applications support
Provide effective problem solving and troubleshooting skills
Identify applications and create application block diagrams for ams products
Work closely with sales team to expand ams product base with existing customers
Contribute to the definition of new products through ams New Product Proposal Process
Work closely with the business units, sales teams, distributors and customers and provide proactive support for customer design engineers and help sales drive design wins
|
Sr. Staff Engineer, Field Application Engineering
|
France |
Sales |
2020-02-19 |
Understand EMRF and generate work orders
Familiarisation of product and warehouse pick phase location
Picking for work orders
Eye ball checking on physical goods against document
EMRF – Able to literate and understand order processing methodology
Print work orders from share drive and run report from SAP
Picking – Comprehend paper part number to pick against physical part correctly by matching the part label
Picking compliance of FEFO , earliest expiry must be picked
Checking – Apply due diligence to this role by eyeball checking every single item pick against the MRF
|
Skilled Officer, Warehouse
|
Singapore |
Operations & Manufacturing |
2020-02-18 |
Responsibility for all external wafer manufacturing sites (foundries) and wafer processing (coating) suppliers within ams portfolio
Leading a team of supplier quality engineers, which is globally distributed
Monitoring the overall performance of foundries with regards to production and technology development (analyzing production processes, identifying areas for improvements & setting up / reviewing relevant process KPIs)
Supporting major ramp ups in close cooperation with NPI teams
Supervising (partially onsite) of process technologies in close cooperation with process engineering & process R&D
Co-working with various engineering departments and product- / process reliability team regarding qualification of new devices, technologies and changes in existing process flows
Leading and managing task forces
Coordinating quality issues at suppliers and internal ams sites
Performing process and quality audits following IATF 16949 and VDA 6.3 standards
Preparing and attending customer audits / visits at supplier sites
Preparing and attending internal audits
Managing disposition of critical material at suppliers
Driving continuous improvement programs to establish predictable and reliable manufacturing capabilities at ams wafer manufacturing suppliers
Ensuring that products, services & procedures are fit for purpose and meet both external & internal requirements and customer expectations
|
Manager, Foundy Supplier Quality
|
Taiwan |
Quality |
2019-12-18 |
Responsibility for all external wafer manufacturing sites (foundries) and wafer processing (coating) suppliers within ams portfolio
Leading a team of supplier quality engineers, which is globally distributed
Monitoring the overall performance of foundries with regards to production and technology development (analyzing production processes, identifying areas for improvements & setting up / reviewing relevant process KPIs)
Supporting major ramp ups in close cooperation with NPI teams
Supervising (partially onsite) of process technologies in close cooperation with process engineering & process R&D
Co-working with various engineering departments and product- / process reliability team regarding qualification of new devices, technologies and changes in existing process flows
Leading and managing task forces
Coordinating quality issues at suppliers and internal ams sites
Performing process and quality audits following IATF 16949 and VDA 6.3 standards
Preparing and attending customer audits / visits at supplier sites
Preparing and attending internal audits
Managing disposition of critical material at suppliers
Driving continuous improvement programs to establish predictable and reliable manufacturing capabilities at ams wafer manufacturing suppliers
Ensuring that products, services & procedures are fit for purpose and meet both external & internal requirements and customer expectations
|
Manager, Foundy Supplier Quality
|
Singapore |
Quality |
2019-12-18 |
Are you an experienced Digital IC Design Engineer ready to take on a new career challenge? You will join a team of designers and your contribution will bring about the next generation of products for our world-wide customers.
You will translate the product requirements into detailed design specifications, implementing the RTL code and lead the RTL-to-GDS process. You will work in close collaboration with system architects, analog and other digital designers, verification and test engineers.
Create and execute verification plans/Testbench design (in cooperation with our dedicated verification engineer)
Execute synthesis, P&R tasks or drive and follow-up on these outsourced tasks
Support the silicon validation and production test (DFT)
Contribute to design methodology initiatives
Prepare and report technical progress to project manager and customer
|
Senior Digital IC Designer
|
Belgium |
Research & Development |
2020-02-17 |
Responsible for external manufacturing with focus to glass coating technologies
On-site supervision of process technologies in close teamwork with process engineering, NPD & NPI team
Co-working with various engineering departments and product & process reliability team regarding qualification of new devices, technologies and process flow changes
Coordinates issues between suppliers and in-house productions
Performs process and quality audits following IATF16949 and VDA 6.3 standards
Monitoring of over all performance of suppliers
Preparing & attending customer visits / meetings / audits at supplier sites
Managing the disposition of critical material at suppliers
Driving & Monitoring of continuous improvement programs to establish predictable and reliable manufacturing capabilities at suppliers
Ensuring „fit-for-purpose“ of products & services to meet internal / external / customer requirements
Support product development, product qualification and release to production
Beneficial: Ability to comprehend, resolve and communicate complex technical issues
|
Senior Supplier Quality Engineer
|
China |
Quality |
2020-02-10 |
Review, Challenge and contribute to Process selection, Process maturity and Industrialization of product development projects
Ensure that process selection and industrialization is performed in accordance with internal and external engineering standards
Contribute to best practice in process and device development and rampup of production
Guide teams in their choice of structured problem solving techniques
|
Principal Engineer
|
Switzerland |
Research & Development |
2020-02-04 |
Review, Challenge and contribute to Process selection, Process maturity and Industrialization of product development projects
Ensure that process selection and industrialization is performed in accordance with internal and external engineering standards
Contribute to best practice in process and device development and rampup of production
Guide teams in their choice of structured problem solving techniques
|
Principal Engineer
|
Germany |
Research & Development |
2020-02-04 |
Review, Challenge and contribute to Process selection, Process maturity and Industrialization of product development projects
Ensure that process selection and industrialization is performed in accordance with internal and external engineering standards
Contribute to best practice in process and device development and rampup of production
Guide teams in their choice of structured problem solving techniques
|
Principal Engineer
|
Austria |
Research & Development |
2020-02-04 |
To provide engineering support in order to meet output, efficiency, productivity, safety, yield and cycle time requirements at minimum cost while maximizing product quality.
Responsible to coordinate and optimize the efficiency and effectiveness of all material flow among all production areas and tool sets.
To be analytical and show high initiatives to drive line KPIs with teamwork horizontally and vertically
Trouble-shooting of defect and yield issues and process excursions associated with the new process/tools for die attach process.
Ensure SPC are within control.
To coach, train and develop shift engineers and process technicians to continuously improve and optimize pick and place yield performance.
To be able to demonstrate strong leadership with high level of maturity and innovation in solving technical or/and people problems and be able to articulate his/her thoughts and ideas clearly across cross-functional teams and all levels with data and facts.
Sustain pick and place process operation. Actively drive pick and place process improvement, inclusive of process/product characterization, qualification and production pilot runs and volume ramp to achieve timely delivery of quality innovations and products to meet market and customer demands.
|
(Tech) Staff Process Engineer
|
Singapore |
Operations & Manufacturing |
2020-02-17 |
2. Monitors closely the test manufacturing process. Coordinates and qualifies the production activities in meeting customers’ requirements
3. Provides Product Engineering support and work with the customers to improve product yield, quality and reliability.
4. Initiates and recommends corrective actions on the basis of technical analysis to maintain specified quality levels, yields and cycle time.
5. Follows-up corrective and improvement actions; involved in test yield improvement activities.
6. Stron
|
Quality Engineer
|
Philippines |
Quality |
2020-02-14 |
ams is a global semiconductor company looking for top talent to expand our dynamic workforce. Business is booming - revenue is up, expansion is in the air, and the sky is the limit. Come be a part of an outstanding growth opportunity where you can make a difference! Excellent compensation packages and benefits are one click away.
ams sensor solutions take sensing to the next level by providing a seamless interface between humans and technology. We enable our customers to create highly differentiated products that are smarter, safer, easier to use and more eco-friendly. We develop high-performance solutions for the most challenging applications in sensors, sensor interfaces, power management and wireless. Experience the seamless interface between humans and technology.
AMS is a fast growth technology company with a strong customer base including Tier 1 players in consumer electronics and automotive industries across the globe. We are the world's leading technology company in the area of high power, high efficiency Vertical Cavity Surface Emitting Lasers (VCSELs) which is becoming the dominant technology of diode lasers for a wide range of highest volume consumer electronics applications.
Our multinational team consists of renowned experts in the field of diode lasers and related complex optical products. Our goal is to combine micro-optics to the laser systems at wafer level to develop advanced optical components and subsystems for high volume applications. Laser Characterization Engineer will be responsible for developing test and characterization platform and for hands-on electro-optical characterization of VCSELs, supporting R&D and production flow.
• Develop Test and Characterization platform for VCSEL devices (on wafer and subassembly levels) including test equipment and components sourcing, hardware integration and automation
• Perform hands-on electro-optical characterization of device performance and prepare characterization report.
• Write and debug test programs for device characterization.
• Calibrate and maintain characterization setup and test equipment
• Interact with vendors and internal engineers to design and procure test equipment and test fixtures
• Analyze test data, perform root cause analysis of device failures, and define solutions.
• Recommend improvements to device structure based on characterization data.
• Develop new techniques to streamline characterization process.
• Identify and resolve device performance issues promptly.
• Present test results in accurate and clear manner.
|
Characterization Engineer
|
United States |
Research & Development |
2020-02-14 |
AMS is a fast growth technology company with a strong customer base including Tier 1 players in consumer electronics and automotive industries across the globe. We are the world's leading technology company in the area of high power, high efficiency Vertical Cavity Surface Emitting Lasers (VCSELs) which is becoming the dominant technology of diode lasers for a wide range of highest volume consumer electronics applications.
Our multinational team consists of renowned experts in the field of diode lasers and related complex optical products. Our goal is to combine micro-optics to the laser systems at wafer level to develop advanced optical components and subsystems for high volume applications.
With this opening, we are looking for an experienced optics or laser scientist with significant background and experience in electromagnetics modelling of photonics devices, as well as fabrication processes for making nanostructured optical devices. Candidate should have strong background in numerical methods and programming, and experience with general electromagnetics solvers such as the finite-element-method (FEM) or the finite-difference-time-domain-method (FDTD).
Experience in the design and fabrication of functional photonic devices by using metamaterial is desirable. Experience with complex optical subsystems design and/or physics of semicondutors would be a plus. Advanced science or engineering degree in physics, optical, material or mechanical engineering is required.
The new team member will participate in experimental and theoretical work on novel photonics devices, interfacing with other engineering areas such as mechanical teams and manufacturing partners as well as customers in the development of exciting new leading edge technology. The responsibilities and tasks include:
• Build electromagnetic/wave-based model for analyzing integrated VCSEL (Vertical Cavity Surface Emitting Laser) + micro/nano optics.
• Write custom code for numerical electromagnetics solvers such as the finite-element-method (FEM) and the finite-difference-time-domain-method (FDTD).
• Design integrated micro-optics such as subwavelength grating, hologram and metalens with VCSEL for high volume applications
• Perform FEM and FDTD numerical simulations to optimize the structure and material of integrated micro-optics with VCSEL in terms of mechanical strength and optical performance.
• Develop fabrication process using nanofabrication techniques and build prototypes of integrated micro-optics with VCSEL.
• Set up custom test system and conduct measurments to fully characterize the behavior of various designed and built devices.
• Support sales and interface with customers.
• Interact with different internal engineering groups such as mechanical design, device processing and testing, etc., as well as external resouces.
• Work closely with production operation and quality teams for transferring the design and process to high volume manufacturing.
|
Senior Staff Engineer
|
United States |
Research & Development |
2020-01-09 |
ams is a global semiconductor company looking for top talent to expand our dynamic workforce. Business is booming - revenue is up, expansion is in the air, and the sky is the limit. Come be a part of an outstanding growth opportunity where you can make a difference! Excellent compensation packages and benefits are one click away.
ams sensor solutions take sensing to the next level by providing a seamless interface between humans and technology. We enable our customers to create highly differentiated products that are smarter, safer, easier to use and more eco-friendly. We develop high-performance solutions for the most challenging applications in sensors, sensor interfaces, power management and wireless. Experience the seamless interface between humans and technology.
AMS is a fast growth technology company with a strong customer base including Tier 1 players in consumer electronics and automotive industries across the globe. We are the world's leading technology company in the area of high power, high efficiency Vertical Cavity Surface Emitting Lasers (VCSELs) which is becoming the dominant technology of diode lasers for a wide range of highest volume consumer electronics applications.
Our multinational team consists of renowned experts in the field of diode lasers and related complex optical products. Our goal is to combine micro-optics to the laser systems at wafer level to develop advanced optical components and subsystems for high volume applications.
The individual should have a thorough knowledge and extensive experience in semiconductor laser physics and design. Some experience with epitaxial growth and processing, as well as mask layout is highly desirable. Strong analytical and communication skills are a must.
|
Laser Engineer
|
United States |
Research & Development |
2020-02-10 |
Corporate Controlling w/ focus on Shared Service Centers
Corporate Controlling w/ cost center planning and related deviation analysis to actuals
|
Corporate Controller (m/f/d)
|
Austria |
Finance & Controlling |
2020-02-14 |
Ownership of dicing process toolset
Monitor tool/process instability and develop action plans to reduce long-term stability issues, CpK and ownership of process control improvement plans
Lean manufacturing: identifying opportunities to eliminate waste within own toolset/process- operator time, process simplification, qualification optimisation
Reporting of scrap/rework and ownership of scrap/rework reduction plans
Take ownership for driving actions and progress of related yield excursions on associated process. Be the focal point and send updates on associated scrap incidents
Support cost reduction programs associated with process
Responsible for training on process
Write detailed operation procedures for Tool Operation/OCAPS
|
Engineer, Process (Dicing/Stacking)
|
Singapore |
Operations & Manufacturing |
2020-02-13 |
The Regional Procurement Key User will be responsible to drive automation and digitalization throughout procurement processes by supporting local plant teams by standardization and harmonization.
The goal is to bring the procurement processes to a higher maturity level with the aim to decrease administrative workload and increase efficiency of the organization. You are required to understand the needs of local teams, build synergies and share good practices on SAP / MM.
This position is responsible to represent the interests of the global procurement organization towards the business stakeholders and IT cooperation partners.
Tasks: Increase overall maturity level and automation in all plants, Reduce transactional and manual workload (especially reporting), Support integration projects of new acquisition, Act as unique point of contact for local requirements, Manage authorization and access rights, Train local colleagues
|
Senior Specialist SAP MM Module (m/f/d)
|
Austria |
Supply Chain Management |
2020-02-12 |
Assists the Finance Manager on local finance monthly/quarterly/year-end close and financial reporting.
Managing of month end close process including the posting of all GL related journals.
Generate monthly journal entries, journal listing and maintenance of journal files.
Preparation of monthly Balance Sheet Schedules and monthly financial review reports with variance analysis and commentary.
Review and reconcile the general ledger, identifying and thoroughly investigating any discrepancies and taking the proper corrective actions to resolve them.
Ensure all financial reports are accurate and prepared in accordance to local accounting standards and corporate requirements in a timely manner
Participate in annual audit by internal/external auditors including preparation of audit schedules, audit queries and other audit related tasks as directed by Manager
Responsible for the maintenance of Accounting policies and procedures.
Assist with the continuous review and implementation of accounting and financial procedures, policies and processes.
Assist with ad-hoc assignments as directed by Manager.
|
Senior Finance Associate
|
Singapore |
Finance & Controlling |
2020-02-04 |
Work (also in cooperation with our BusinessLines) on state-of-the-art analog/mixed-signal design methodologies and integration of those into the ams design flow.
Drive/Support automation of the design environment and flow to improve efficiency and productivity
Support the adoption of newly developed/introduced methodologies.
Documentation and distribution of developed methodologies, best practices and corresponding design flows
Execute and support the evaluation of new tools and flows in this domain.
|
Analog design methodology engineer
|
Germany |
Research & Development |
2020-02-07 |
We are looking for an applied researcher with expertise in deep learning. Ideally, you have hands-on experience with PyTorch and a good understanding of deep learning approaches. As part of the R&D team, you will work with other researchers to implement, train and evaluate machine learning algorithms, as well as closely interact with the software development team for technology transfer into our products.
Conduct ML research under the supervision of more senior staff
Help with maintenance of research code
|
Machine Learning Researcher
|
Switzerland |
Research & Development |
2020-02-11 |
Lead the Supplier Excellence team with right capabilities in managing Global supplier base that comprises of BOM and OSAT suppliers.
Develop and deploy Supplier Quality Management Strategies that are aligned to AMS Quality & Business objectives.
Provide leadership for Supply Excellence team and ensure goal of “one face (DRI)” towards supplier.
Drive standardization on Supplier Quality Management Processes, KPIs, tools, template and general way of working.
With the ultimate authority and empowerment, be responsible for decision over the shipment of any product or products
Manage supplier development programs improve their quality maturity level.
Lead / Support procurement in new supplier selection, qualification for ams.
Drive early supplier involvement during New Product Introduction (NPD-NPI).
Plan & Execute production readiness audit @ supplier to ensure agreed process flow and control plans are in place including GR&R, MSA Cpk and SPC controls prior to Mass production Run (MPR).
Lead and manages task forces and coordinate issues at supplier and internalmanufacturing for resolution
Lead and manages task forces and coordinate issues at supplier and internalmanufacturing for resolution
Leads the customer / routine audit management for compliance using VDA 6.3 Process audit approach.
Manages change management and critical material disposition at suppliers through PCRB / MRB process
|
Director
|
Singapore |
Operations & Manufacturing |
2020-02-11 |
Owns full Quality Engineering responsibility for new product and technology developments, as part of the project team. Focus is on key customer projects
Develops qualification strategy for assigned projects. Plans, supervises and coordinates qualification execution in cooperation with reliability test laboratories - ensuring first time right.
Develops new failure analysis methods for assigned projects in teamwork with failure analysis teams
Performs failure analysis and 8D reporting, initiates and drives the implementation of containment / corrective actions
Drives and manages quality and reliability issues, as well as continuous improvement in all areas of interest
Represents Quality in internal and external meetings and events
|
Staff Engineer. Product Quality (m/f/d)
|
Singapore |
Quality |
2019-10-03 |
Controlling and reporting of all DIV related Q topics (Product qualification compliance within business processes, Quality procedures compliance, product return analysis & handling, internal & external audit preparation & management, continuous improvement)
A full line member of Quality in the DIV MT
Ensures Product Quality Engineering and Customer Quality Engineering support/resources in all the defined projects within the Division
Drives Failure Analysis and Reliability asset/resource commitment from Corporate Quality (within regional ams), including outsourced model
Drive reduction of rework/rescreen improvements through KPIs and goal alignment/handshake with Operations
Ensure full compliance of the DIV management to all relevant standards and procedures in Quality
Risk mitigation planning impacting Quality
Contribute and act as team player within the DIV MT
The Division QM is overall responsible to support the DIV MT in all Quality related topics in close cooperation with the Quality Team and in full compliance with the company´s QA standards and procedures. The Division QM reports to Division GM and dotted line to Head of Quality. He is full part of the DIV MT and shares accountability for the results of the Division.
|
Division Quality Manager (m/f/d)
|
Switzerland |
Quality |
2019-12-18 |
Controlling and reporting of all DIV related Q topics (Product qualification compliance within business processes, Quality procedures compliance, product return analysis & handling, internal & external audit preparation & management, continuous improvement)
A full line member of Quality in the DIV MT
Ensures Product Quality Engineering and Customer Quality Engineering support/resources in all the defined projects within the Division
Drives Failure Analysis and Reliability asset/resource commitment from Corporate Quality (within regional ams), including outsourced model
Drive reduction of rework/rescreen improvements through KPIs and goal alignment/handshake with Operations
Ensure full compliance of the DIV management to all relevant standards and procedures in Quality
Risk mitigation planning impacting Quality
Contribute and act as team player within the DIV MT
The Division QM is overall responsible to support the DIV MT in all Quality related topics in close cooperation with the Quality Team and in full compliance with the company´s QA standards and procedures. The Division QM reports to Division GM and dotted line to Head of Quality. He is full part of the DIV MT and shares accountability for the results of the Division.
|
Division Quality Manager (m/f/d)
|
Germany |
Quality |
2019-12-18 |
Controlling and reporting of all DIV related Q topics (Product qualification compliance within business processes, Quality procedures compliance, product return analysis & handling, internal & external audit preparation & management, continuous improvement)
A full line member of Quality in the DIV MT
Ensures Product Quality Engineering and Customer Quality Engineering support/resources in all the defined projects within the Division
Drives Failure Analysis and Reliability asset/resource commitment from Corporate Quality (within regional ams), including outsourced model
Drive reduction of rework/rescreen improvements through KPIs and goal alignment/handshake with Operations
Ensure full compliance of the DIV management to all relevant standards and procedures in Quality
Risk mitigation planning impacting Quality
Contribute and act as team player within the DIV MT
The Division QM is overall responsible to support the DIV MT in all Quality related topics in close cooperation with the Quality Team and in full compliance with the company´s QA standards and procedures. The Division QM reports to Division GM and dotted line to Head of Quality. He is full part of the DIV MT and shares accountability for the results of the Division.
|
Division Quality Manager (m/f/d)
|
Austria |
Quality |
2019-12-18 |
Join our team of Software developers and take on the design, implementation, test and documentation of custom software solutions for our internal customers (interfaces, technical concepts for solutions, enhancements to existing solutions).
Analysis of problems/failures during the whole software life-cycle together with our key users.
Help develop and move forward the services of the software development team.
Work in teams and in a self-reliant manner, interacting with internal customers.
Create new interfaces or adapt existing ones to third-party systems.
|
Software Developer + Oracle exp.,
|
Portugal |
IT |
2020-02-10 |
Capacity Planning for Internal Manufacturing
Build standardized models for capacity planning with internal manufacturing
Work with Production Planning, Supply Chain, Internal Operation, Materials and NPI Engineering for capacity rationalization and gap closures to plan
Regular updates on capacity status (to SCM) and operations and per S&OP cycles
Identify opportunities for capacity improvement.
|
Staff Engineer, Industrial Engineering
|
Singapore |
Operations & Manufacturing |
2020-01-27 |
Communicate with EPI design group for EPI structure detail and EPI development plan
Develop and create growth recipe and EPI process flow for both R&D and production EPIs
Implement risk assessment for each individual process steps for process fabrication.
Working with VCSEL team to qualify new EPI product
Improve on quality of product and reproducibility of the product for mass production.
Build strong wafer fabrication environment that comply with quality standards ISO/TS16949.
Define process yield target and Implement continuous improvement approach for existing product
Manage EPI process development, implementation, and documentation
|
Senior Staff Engineer, EPI Dev
|
Singapore |
Research & Development |
2019-12-05 |
Owns the sales forecasting, conducts macroeconomic & market trends research and funnel management integrity of the sales organization
Ensure compliance and adopt sufficient internal controls over the ams financial and operating procedures
Ensure collection and financial risk is identified and managed
Responsible to provide accurate financial reporting and sales insights to sales executive management to assist in decision making
Takes on the role to review customer related commercial agreements, sizing up risk and opportunities
Responsible that spending within budget objectives by scheduling expenditures; analyzing variances; initiating corrective actions
Responsible for reporting findings and working with financial and executive staff to make financial decisions
Proactively develops new and maintains existing internal relationships with business lines finance and marketing to ensure a highly informed and engaged team to understand, and committed with the execution of the sales strategy.
Works closely with all internal individuals and teams to leverage the global depth of expertise to support the customer, secure profitable business for ams and capture customer share of wallet from our competitor’s quarter over quarter.
Leverages the tools, resources and events provided within ams and the industry to position ams as a leader and the partner of choice to support the customer successfully om executing their business strategy and bringing their products to the market.
Leads without formal authority and void of politics ensuring everyone is focused on what the customer needs.
Develops and maintains advanced knowledge and understanding of the commercial and technical developments within the technology
|
Contractor: Controlling and Sales Ops.
|
Singapore |
Customer & Sales Support |
2020-02-10 |
Able to work 12 hour night shift in cleanroom environment
Operate and ensure smooth running of machines
Perform tool periodic maintenance and troubleshooting works
Able to work on weekends and support OT when needed
|
Engineer, Equipment
|
Singapore |
Operations & Manufacturing |
2020-02-10 |
• Operate, Setup & Maintain AOI Recipes.
• Lead Continuous Yield Improvement & Defect Reduction Projects
• Support New Product Introduction
• Lead Process Integration among the Backend and Frontend Processes
• Perform AOI Machine Correlation
• Monitor and Conduct Periodic Measurement System Analysis
• Report Yield & Defect
• Support Failure Defect Analysis
Engineer needs to make decisions on:
1) AOI machine set up buyoff method
2) AOI recipes creation and maintenance.
3) AOI machine optimisation
|
Staff Engineer, AOI
|
Singapore |
Operations & Manufacturing |
2020-02-10 |
Manage and lead a team of Engineers and Technicians to provide engineering support and ensuring stable manufacturing line and meet the customer demand
Lead in engineering and other cross-functional projects to achieve the organization goals of costs, yield, productivity and quality goals.
To buildup the team's technical know-how and ensure knowledge retention.
Provide coaching to the team to improve their individual performance and buildup a culture of continuous improvement and innovation.
|
Process Manager
|
Singapore |
Operations & Manufacturing |
2020-02-10 |
• Lead and manage new NPD line setup and buyoff.
• Development for new product wafer fabrication processes based on product required and DFM.
• Lead improvements in process yield, quality, cycle time, and output delivery.
• Develop and implement advanced processes methodologies and metrologies.
• Perform defect and failure analyses for assembled module process failure or yield loss.
• Manage new FEOL qualification and ramp up.
• Train and lead process team to meet product and quality required.
|
Process Development Manager
|
Singapore |
Research & Development |
2020-02-10 |
● Oversee the overall schedule of the program in order to meet the demand of the product given by the customer.
● Overall responsible for the program from ramp to MP.
● Be the overall driver for any issue (Quality, yield and delivery) that will affect the ramp of the product.
● Driver for the program capacity readiness and ramp.
● Coordinate with Engineering Team to ensure all machine and process buy off ready for the ramp.
|
Operations Program Engineer
|
Singapore |
Operations & Manufacturing |
2020-02-10 |
Responsible for external manufacturing with focus on CMOS & VCSEL technologies
On-site supervision of process technologies in close teamwork with process engineering, NPD & NPI team
Co-working with various engineering departments and product & process reliability team regarding qualification of new devices, technologies and process flow changes
Coordinating issues between suppliers and in-house / external productions within the supply chain
Performing process and quality audits following IATF16949 and VDA 6.3 standards
Monitoring of over all performance of suppliers
Preparing & attending customer visits / meetings / audits at supplier sites
Managing the disposition of critical material at suppliers
Driving & Monitoring of continuous improvement programs to establish predictable and reliable manufacturing capabilities at suppliers
Ensuring "fit-for-purpose" of products & services to meet internal / external / customer requirements
Support product development, product qualification and release to production
Beneficial: Ability to comprehend, resolve and communicate complex technical topics
|
Senior Staff Supplier Quality Engineer
|
Taiwan |
Quality |
2020-02-10 |
Execute failure analysis tasks in the lab (microscopy, chemical delayering, polishing, cross-sectioning, SEM, dualbeam FIB/SEM, TEM, EBIC/EBAC, micro- and nano-probing…)
Develop and establish new FA methodologies, support FA development for new products and technologies
Perform maintenance and sustaining work on laboratory tools and equipment; Takes over responsibility and trainings; takes over responsibilities for equipment evaluation and acquisition
Continuous improvement of ams Failure Analysis Procedures and Tools
Documentation & reporting: Generates and contributes to documents like analysis reports, 8D reports, failure analysis procedures
Supports cross-functional teams for failure analysis
Acts as representative to internal and external customers
|
Sr Staff Engineer, FA
|
Singapore |
Quality |
2020-02-10 |
Development and Implementation of FDC/APC Applications in wafer Fab
Setup and Sustaining of existing FDC/APC solutions
Setup and Sustaining of complex reporting applications
Close cooperation with other departments for solution implementation
Responsible for quality improvements
Technical interface to partners/solution suppliers/contractors
|
IT Application Engineer (m/f/d)
|
Austria |
Operations & Manufacturing |
2020-02-10 |
• Able to support Calibration activities,
• Support customer audit, supplier and internal audit and its preparation
• Able to support 5S initiatives abd monitoring
• Performs other tasks assigned to him/her
|
QMS Technician
|
Philippines |
Quality |
2020-02-10 |
1. Responsible for the implementation of the lot acceptance procedure that covers the following: (a) Incoming QA, (b) Electrical Buy-off & (c) Plant Clearance Buy-off.
2. Monitors closely the test manufacturing process. Coordinates and qualifies the production activities in meeting customers’ requirements
3. Provides Product Engineering support and work with the customers to improve product yield, quality and reliability.
4. Initiates and recommends corrective actions on the basis of technical analys
|
Test Quality Technician
|
Philippines |
Quality |
2020-02-10 |
1. Responsible for the implementation of the lot acceptance procedure that covers the following: (a) Incoming QA, (b) Electrical Buy-off & (c) Plant Clearance Buy-off.
2. Monitors closely the test manufacturing process. Coordinates and qualifies the production activities in meeting customers’ requirements
3. Provides Product Engineering support and work with the customers to improve product yield, quality and reliability.
4. Initiates and recommends corrective actions on the basis of technical analys
|
Test Quality Technician
|
Philippines |
Quality |
2020-02-10 |
1. Responsible for the implementation of the lot acceptance procedure that covers the following: (a) Incoming QA, (b) Electrical Buy-off & (c) Plant Clearance Buy-off.
2. Monitors closely the test manufacturing process. Coordinates and qualifies the production activities in meeting customers’ requirements
3. Provides Product Engineering support and work with the customers to improve product yield, quality and reliability.
4. Initiates and recommends corrective actions on the basis of technical analys
|
Test Quality Technician
|
Philippines |
Quality |
2020-02-10 |
1. Conducts environmental audit and inspection
2, Conducts investigation on environmental-related incidents
3. Prepares and presents EHS reports and updates to EHSS Management
4. Creates, implements and reviews EHS-based procedures, guidelines and other instruction
5. Conducts envi training and awareness to all employees and contractors
6. Acts as Liaison Officer to coordinate with government agencies/ offices
7. Directly supports and assist other EHSS activities and programs
|
Pollution Control Officer
|
Philippines |
Central Functions |
2020-02-10 |
a. Order mgmt and maintenance
b. Vendor mgmt and maintenance
c. Payment mgmt
d. Process and Productivity improvement
e. System IT improvement project
• To establish local sourcing strategies for all Spend categories such as Equipment and indirect services (office lease, HR & IT related services, office & facility upkeep, Marketing, Professional services, etc) to achieve best value for ams
• To be part of Global team in participation in Commodity Strategies development and sourcing strategies implementation
• To provide local market knowledge / intelligence
• Work with cross-functional stakeholder to establish and implement Procurement framework and processes to improve productivity
• Identifying and implementing cost reduction opportunities across equipment and services. Ensure best overall value is achieve
o Leveraging Company spend nationally and globally to ensure financial benefit to the company.
o Developing and leading a competitive supplier selection process– bids and commercial negotiations
o Always in the mood of Identifying, benchmark, and selection of new sources of supply
• Commercial Contract negotiation. Implementation of Global contract pricing
o Implementation of JIT and Consignment program
o Responsible for Supplier Performance measurement and drive improvement. Work together with cross function team to resolve supplier performance issues
• Conduct supply risk assessments, establish and drive mitigation plans accordingly.
• PO issuance to Supplier and resolving Invoices issue
• Weekly and Monthly performance reporting
• Any other special assignments
|
Specialist, Executive Assistant
|
Philippines |
Operations & Manufacturing |
2020-02-10 |
Development of new advanced materials for the usage in integrated sensor applications
Performance of material characterization measurements, mainly thermo-mechanical analysis like TMA, DMA and spectroscopy (FTIR microscopy, UV/Vis spectrometry, Differential Scanning Calorimetry, etc)
Maintenance and enhancement of material related database
Setting-up of new equipment and measurement techniques; maintenance of the equipment
Contact to external material suppliers and elaborated analysis methods
Active and autonomous participation in project work
|
Material Development and Characterization Engineer (m/f)
|
Switzerland |
Research & Development |
2020-02-07 |
DFM Test-chip generation and rule development
SPICE corner model development
statistical analysis capabilities
SPICE reliability model development
Document generation
|
EDA & DFM Engineer
|
India |
Research & Development |
2020-02-07 |
Compact Modeling and analog simulator support
SPICE and statistical modelling (matching) of active and passive devices for CMOS sensor processes for analog/mixed signal
Realization of Design Documents for CMOS technologies
Design support for SPICE models for LV and HV MOS models
|
Senior Staff Engineer, Compact Modeling
|
India |
Research & Development |
2020-02-07 |
• Design of memory IP blocks (OTP, RAM, ROM, …)
• Design of other digital related IP blocks e.g. control logic, state machines, ...
• Implementation of these IP blocks in (digital) design environment
• Verification of IP blocks in digital design flow (P&R, STA, simulation, ..)
• Support of projects using these IP blocks
|
Manager Digital Design (m/f)
|
India |
Research & Development |
2020-02-07 |
device physics III-V based optoelectronic devices
good knowledge of optical and electrical device measurements
knowledge of reliability failure mechanisms in III-V devices, measurement of device degradation.
familiar with design manuals, design rule documents, layout generation
familiar with SPICE models
ability to work together with colleagues from different departments in different countries
|
Device Engineer
|
Singapore |
Research & Development |
2020-02-07 |
Technology development for VCSEL and III-V with focus on process integration aspects
Providing the interface to external partners and tracking the completion of the project related tasks in accordance with the project plan
Characterization of the technology by test, analysis and work out in conclusive reports
Leading work packages and project sub-teams
Submitting new innovative process and device concepts as patent proposals
Applying problem solving methods (like 8D, Fishbone, etc.) and risk analysis (like FMEA)
Working in team-oriented atmosphere with a strong focus on thorough documentation and completing of projects timely and successfully
Setting expectations by updated and detailed work plans. Identifying gaps, issues and needs to resolve and to successfully complete projects
|
Engineer Process R&D Engineer for VCSEL -2 (m/f)
|
Singapore |
Research & Development |
2020-02-07 |
Technology development for VCSEL and III-V with focus on process integration aspects
Providing the interface to external partners and tracking the completion of the project related tasks in accordance with the project plan
Characterization of the technology by test, analysis and work out in conclusive reports
Leading work packages and project sub-teams
Submitting new innovative process and device concepts as patent proposals
Applying problem solving methods (like 8D, Fishbone, etc.) and risk analysis (like FMEA)
Working in team-oriented atmosphere with a strong focus on thorough documentation and completing of projects timely and successfully
Setting expectations by updated and detailed work plans. Identifying gaps, issues and needs to resolve and to successfully complete projects
|
Engineer Process R&D Engineer for VCSEL -1 (m/f)
|
Singapore |
Research & Development |
2020-02-07 |
Member of BL AUTO Design Verification CoC (Center of competence).
Review and contribute to planning of verification work, development of verification plans
Implementation of mixed signal design verification environments in conformance with internal and external engineering standards like UVM
Analog behavior modelling, analog mixed mode simulations
Definition and execution of state of the art mixed-signal DV methodologies, based on metric driven approaches
Formal verification methods, DfT verification and power intend related verification
Secure project execution according to AUTO and ISO26262 compliant verification standards.
|
Senior Design Verification Engineer (m/f/d)
|
Austria |
Research & Development |
2020-02-05 |
Execute qualification testing for products and technologies; perform reliability monitoring and testing; including full documentation
Design, sourcing and buy-off of Biased Life Test boards (e.g. HTOL, HAST, ELFR, PTC boards)
Design, creaste and verify test set-ups for Biased Life Tests, incl. full documentation
Perform suistaining work on laboratory equipment and tools, typically lab bench equipment and environmental chambers
Continuous improvement of ams Reliability Test procedures and tools
|
Reliability Test Engineer (m/f/d)
|
Austria |
Quality |
2020-02-05 |
Order Management (Purchase Requisition to Purchase Order Conversion, PO issue to Vendor (copy Category Team), Follow up on Supplier PO acknowledgment and update Delivery Date, PO amendment and Cancellation, Obligo Maintenance, Routine open PR Cleanup, PIR Creation/Update and Source Maintenance)
Vendor Management (New Vendor Creation, Existing Vendor Information Update & Extension to new Plant, Vendor Code Maintenance (Cleanup of In-active or Duplicate Vendor Code), Refresh of Declared Documents (Re-sign of NDA and other Procurement Related Documents)
Payment Management (Follow up with Vendor/DRI/Finance on invoice, GR or PO issue which cause payment delay/blockage)
Process and Productivity Improvement & IT Enhancement Project Management (to come up with processes and IT enhancement to make Purchasing Process more efficient, effective and systematic)
Support the technical teams with negotiating the agreement of the needed technical performance
Support the non-strategic purchasers for smaller services and materials in case of escalations
Release orders and monitor the timely follow up on agreements made together with project owner
|
Specialist Procurement (m/f/d)
|
Austria |
Central Functions |
2020-02-04 |
Strategic purchasing of Investment materials such as production and facility equipment/parts
Strategic purchasing of purchased services such as consulting and development projects, etc
Work with internal technical departments to properly source equipment and tools
Negotiate supplier contracts for equipment or services in accordance with ams requirements
Support the technical teams with negotiating the agreement of the needed technical performance
Support the non-strategic purchasers for smaller services and materials in case of escalations
Claim management and the hereto belonging negotiation of compensation
Release orders and monitor the timely follow up on agreements made together with project owner
|
Strategic Purchasing and other Services (m/f/d)
|
Austria |
Global Strategic Purchasing |
2020-02-04 |
Maintain and develop shopfloor scheduling system and rules
Provide manufacturing reports for daily business and KPI monitoring
Modelling and planning of manufacturing capacity
Improvement of productivity
Technical interface to suppliers
|
Industrial Engineer (m/f/d)
|
Austria |
Operations & Manufacturing |
2020-02-04 |
Process responsibility in the semiconductor IC fabrication
Sustaining of existing processes in terms of quality-, performance- and throughput improvement
Characterization and implementation of new equipment
Development of new unit processes
Development and implementation of system/product monitoring strategies
Lead continuous improvement programs (also in cooperation with other departments)
Identification and solving of potential process- and equipment problems
Responsible for quality improvements
Technical interface to suppliers
|
Process Engineer (m/f)
|
Austria |
Operations & Manufacturing |
2020-02-04 |
We are looking for a Talent Specialist that focus on managing end-to-end recruitment for indirect labor in ams. This role will be responsible in recruiting and maintaining talent pipeline in a highly dynamic global environment that aligns with ams Core Values while continually promoting a positive image of ams employer brand.
Responsible for end-to-end Recruitment function such as drafting and posting of job advertisement, conducting interviews, shortlisting of candidates, interview arrangements and preparation of salary packages etc.
Responsible for hiring a diverse range of positions ranging from technical role to management role
Responsible for metrics such as Time to Hire, Cost of Hire, Source of Hire, Quality of Hire, Application Conversion Rate etc
Recommend suggestion for recruitment gaps identified to achieve business goals
Manage key stakeholder relationships (e.g. Hiring Manager) to understand forecasted talent needs and that business needs are being delivered in high quality and efficient manner
Responsible for relationship management with executive search companies including negotiation of framework agreements.
Drive process simplification and systems and tools refinement to ensure ams’ process remains complete, nimble, and creates the right experience for candidates, hiring managers, HR and recruiters across the globe
Assist in internal and external hiring events and other talent acquisition projects
Adhere to the highest degree of professional standards and maintain strict confidentiality in matters that require discretion
Serve as an ams ambassadors, guardian of caliber, culture fit, diversity and candidate experience through the recruitment process
|
Specialist, Talent Acquisition
|
Singapore |
Human Resources |
2020-02-04 |
Execute failure analysis tasks in the lab (microscopy, chemical delayering, polishing, cross-sectioning, SEM, dualbeam FIB/SEM, TEM, EBIC/EBAC, micro- and nano-probing…)
Develop and establish new FA methodologies, support FA development for new products and technologies
Perform maintenance and sustaining work on laboratory tools and equipment; Takes over responsibility and trainings; takes over responsibilities for equipment evaluation and acquisition
Continuous improvement of ams Failure Analysis Procedures and Tools
Documentation & reporting: Generates and contributes to documents like analysis reports, 8D reports, failure analysis procedures
Supports cross-functional teams for failure analysis
Acts as representative to internal and external customers
|
Staff Engineer, FA
|
Singapore |
Quality |
2020-02-04 |
AMS BI Data Analyst Job Description
As a Data Analyst at AMS, you will work closely with the BI and Data Analytics team. You play an important role within the team to help AMS identify trends, make charts, and create visual presentations using a data driven approach for the business to make informed decisions.
Responsibilities
Assist in categorizing data requirements, data availability and data quality for report and dashboard requests
Support classifications and categorization of data
Organize and store data extracts, including point in time estimates, used in report production
Gather and structure information as needed to support User Acceptance Testing and pre go-live data loads
Develop data models to support business analysis and perform data verification and data quality audit
Perform data analysis, identify trends, make charts, create visualisation & storyboarding to effectively communicate insights to stakeholders
Reports and dashboards development, testing and validation
Define and document business requirements and technical specifications for long-term solution implementation
|
BI & Analytics Data Analyst
|
Singapore |
Operations & Manufacturing |
2020-02-04 |
Perform evaluation board design and layout, following suggestions from IC designers
Perform analog / mixed-signal IC evaluation by using electrical instrument in lab
Collaborate with other engineers in a project team to pursuit objectives of the team
Prepare documents required for customer and internal review
|
Lab Validation Engineer
|
Japan |
Research & Development |
2020-02-03 |
To meet the key business users to understand business needs or question and to provide data, reports and analysis to answer question in a timely manner.
Act as a liaison between IT and the business users in an effort to fully understand and articulate business functional requirement.
Assisting in performing data statistical analysis to facilitate decision making process
Involve in data enrichment activities that is relevant for building analytic system
Data mining using state of the art methods
Supporting ad-hoc analysis and presenting data in a clear and informative manner
Develop key business reports, KPIs and Error logs
|
Senior Specialist, Production flows
|
Singapore |
Supply Chain Management |
2019-06-19 |
Quality representative at ams site Hyderabad / India
Owns full Quality Engineering responsibility for new product and technology developments, as part of the project team. Focus is on optical sensor development, which includes IC, VCSEL & module packaging
Ensures Quality in Sensor Design, e.g. by driving Design for Quality / Test / Reliability, Test for Quality / Reliability
Generates high-quality documents like qualification plans, qualification reports, analysis reports, 8D reports, failure analysis procedures
Develops qualification strategy for assigned projects. Plans, supervises and coordinates qualification execution in cooperation with reliability test laboratories and failure analysis laboratories - ensuring first time right.
Represents Quality in internal and external meetings, audits and events
Drives and manages quality and reliability issues, as well as continuous improvement in all areas of interest
Efficient, effective and timely reporting to Division Quality Manager, project lead, and other stakeholders to maintain commitments
|
Senior Staff Engineer, Product Quality
|
India |
Quality |
2019-05-23 |
Break down high level block requirements into detailed requirements
Execution of cell design according requirements including proper documentation, with focus in low noise front ends for medical imaging market
Design for manufacturability (parameter variation, testability)
Participate on technical design reviews
Interdisciplinary coordination and corporation with internal departments especially during product development
Creation and patenting of new IP
|
Staff Analog Design Engineer
|
Switzerland |
Research & Development |
2019-06-28 |
Projektleitung für die Entwicklung und Industrialisierung von ASIC Sensorlösungen
Verantwortlich für die Planung der Personalressourcen, Material und Investitionen
Führung des internationalen Projektteams
Projektdurchführung unter Einhaltung der Entwicklungsrichtlinien (Compliance)
Projektcontrolling und Erarbeitung von Korrekturmassnahmen bei Abweichungen von Budget, Zeitschiene, Projektumfang und Qualitätsanforderungen
Kontaktperson zu externen Ansprechpartnern und internen Stellen (R&D, Testentwicklung, Technologie, IP Entwicklung, Qualität, Produktmanagement, Verkauf und externen Lieferanten)
Regelmässige Kundenkommunikation: Statusreviews, Führung der Aktionsliste und Pflege der Meilensteine
Ansprechpartner für technische Kundenanfragen im Bereich CMOS Design, Technologie und optischen Sensoren
Übersetzen technischer Kundenanfragen in interne Anforderungen, Lösungsfindung mit dem Projektteam und Erarbeitung von technischen Angeboten
Konsolidieren von Informationen und Präsentation an interne/externe Kunden (Technische Dokumente, Produktionstest- und Qualitätsdaten)
Koordination der Produktionstestentwicklung von ASIC’s und Schnittstelle zu externen Zulieferern
Sicherstellung der Testabdeckung für die Massenproduktion und Erreichung Produktionsausbeute, inkl. Definition von Verbesserungsmassnahmen
Verantwortlich für die interne Bestellung und Auslieferung von Engineering Material gemäss vereinbarten Zeitplänen
Initiierung von Massnahmen zur Vermeidung von Qualitäts- und Zuverlässigsproblemen für die Massenproduktion
Koordination von Qualitäts- und Zuverlässigkeitstests (z.B. ESD, Latchup, HTOL) und Definition von RMA Konzepten
Bereitstellung und Unterhalt von internen Produktionsdokumenten (Waferproduktion, Wafersort, Sägen, Assembly und Verpackung)
Koordination von Arbeitsgruppen für Design-, Layout-, Testreviews und Qualitätsverbesserungen
|
Sr. Project Manager
|
Switzerland |
Research & Development |
2019-05-23 |
TEAM BUILDING
Lead cross-functional product development team, coordinate project activities;
Inspire, encourage the team members to high level of motivation and commitment
Drive open problem discussion, effective issue resolution
Recognize conflict, support/coach individuals, maintain team focus and meet targets together
Lead regular process reviews with the project team to improve their project approach
PROJECT EXECUTION
Meet customer expectations and commitments
Execution of Project Management according to the ams project execution requirements
Report project progress and gate/milestone passing in the meetings
Ensure planned project activities are executed timely to meet the production start schedule
Professionally manage risk management, use of tools as FMEA and Maturity Matrix
Manage change requests and problem reports
Ensure design and implementation meets DfX requirements including formal review meetings
INTERFACE TO STAKEHOLDERS
Align with Program, Engineering, Marketing and Product management to meet customer expectations
Timely escalation of issues and risks to management and ownership to resolve issues
Maintain close co-operation with customers and suppliers during development project
Actively participate in ams internal knowledge sharing forums related to Project management
|
Senior Project Manager (m/f)
|
Italy |
Research & Development |
2020-02-03 |
Work with management in coordinating and planning production activities to improve run time.
Plan production tasks and schedules according to customer orders.
Develop and review production plan with Managers for approval.
Monitor the execution of production plan and resolve any potential issues in a timely fashion.
Investigate production problem, analyze root causes and provide solutions.
Maintain reports for production planning activities
Analyze back orders, current orders and upcoming orders to prioritize, plan, and schedule the production operations.
Plan equipment, material and-or manpower requirements to execute job orders.
Coordinate with Managers in planning and implementing engineering changes in production lines.
Plan inventory management processes to avoid shortages and excesses.
Monitor production progress and ensure that the output demand meets quality standards and customer specifications.
Analyze delays and interruptions and accordingly adjust production schedule to meet deadlines.
|
Specialist, Production Planner
|
Singapore |
Operations & Manufacturing |
2020-01-31 |
Responsible for production, planning, work force deployment, process improvement, delivery commitment and product quality.
Analyzes operation problem and recommend programs or setting up new SOP to improve productivity, efficiency and yield.
Conduct OJT training and ensure optimism skill level on all aspects of process.
Enhance and maintain safety standard, security measures consistent with company policy and implement good housekeeping program.
Perform first level troubleshooting for operation issue.
|
Senior Team Lead, Production Supervisor
|
Singapore |
Operations & Manufacturing |
2020-01-31 |
Assist to develop and execute company environmental health and safety (EHS) plans and policies, and coordinate programs that ensure safe working conditions.
Assist to provide monthly EHS and Waste data tracking data to CORP and Customer
Plan and Conduct trainings, toolbox meetings and awareness programs, informing employees of company EHS plans and promoting safe practices.
Supervise employee activities and inspect company equipment and property to ensure compliance with EHS standards.
Coordinate and work with process owners and stakeholders on Fire, EHS and related permits, licences and certificates application and maintenance.
Develop, Train and Maintain the company ERT and Readiness.
Coordinate, work with stakeholders and support the ISO 14001 & 18001/45001 certification and Customer CSR programs.
Advise and inspect compliance on the company permit-to-work system and ancillary procedures.
Handle accident reports including directing investigations, records filing and identify strategies for preventing future accidents to ensure effective closure.
Maintain the company fire safety & emergency planning program including setting up response plan, testing readiness, ensure preparedness, facilitate awareness and ensuring compliance to the fire safety maintenance process.
Received and work with stakeholders to close safety feedbacks in person or anonymously.
Assume the duty of Secretary of the EHS Committee and implement best practices in facility so as to achieve a safer working environment.
Any other duties and responsibilities as assigned by the EHS Manager & Facilities Director.
|
Staff Engineer, EHS
|
Singapore |
Operations & Manufacturing |
2020-01-31 |
Working in a multidisciplinary team being responsible of the boards design for opto-electronic sensors
Develop and enhance new and current circuit solutions
Provide support to PCB designers, manufacturing and packaging teams when required
Review and recommend improvements to existing designs
Assist in preparing test procedures and developing test fixtures to verify PCB functions
Test, develop and de-bug designs in the lab
Analyze and respond to issues as it arrives
Develop and maintain relations with other departments while different phases of product development
Evaluate engineering design and head project engineering design specific to electrical discipline
Suggest modifications to develop and design to enhance quality
Develop electrical projects analysis to include preliminary design and related calculations
Develop technical construction specifications
Review designs development for conformance with applicable codes, utilizing engineering standards along with good engineering practices
Sharing the responsibility in Product Design team with all the members
Ongoing support to other members of the AMS design team locally and abroad
Contributing to the ongoing creation of a positive, productive work environment
Follow departmental policies and safety regulations
Must be willing to travel up to 20% of the work time
|
Electrical Design Engineer (M/F)
|
Singapore |
Research & Development |
2019-10-09 |
Allgemeine Dokumentationsaufgaben (z. B. Führen von Anlagenbüchern)
|
Metallbautechniker (m/f/d)
|
Austria |
Central Functions |
2020-01-31 |
Allgemeine Dokumentationsaufgaben (z. B. Führen von Anlagenbüchern)
|
Sanitär-, Heizungs- und Lüftungstechniker (m/f/d)
|
Austria |
Central Functions |
2020-01-31 |
Betrieb und Wartung von Elektroversorgungsanlagen (Nieder- und Hochspannung), Ersatzstromgeneratoren, haustechnischen Anlagen (Steckdosen, Lichtanlagen, etc.) und Maschinen
Installation, Reparatur und Überprüfung von Elektroversorgungsanlagen (Nieder- und Hochspannung), Ersatzstromgeneratoren, haustechnischen Anlagen (Steckdosen, Lichtanlagen, etc.) und Maschinen
Allgemeine Dokumentationsaufgaben (z. B. Führen von Anlagenbüchern)
Bereitschaftsdienst (1 Woche/Monat)
|
Elektrotechniker (m/f/d)
|
Austria |
Central Functions |
2020-01-31 |
Software Application engineer based in Shanghai/Suzhou, focus on Optical Sensor products of ams, support key mobile Applications/Accounts in Shanghai and East China;
Development of software and firmware for embedded systems, including RTOS/Linux/Android platforms
Embedded driver and optical sensing algorithm development in Linux/RTOS or various sensor hub frameworks
Responsible for software architecture and design decisions for overall software system design and architecture
Development of reference systems and demos
Drafting of customer facing documentation, such as application notes, articles, and presentations
Development and presentation of training materials for both internal staff and external customers
Specification of reference applications for target markets including system architectures, circuits, and components
Support Marketing and Engineering in new device definition and work statement preparation
Travel up to 30%
|
Senior Staff Application Engineer, Mobile Optical Sensors
|
China |
Sales |
2020-01-30 |
Responsible for quality in frontend operation area in Premstätten, Austria
Leads and manages the Frontend Quality Operation team in Fab B, Premstätten.
Responsible for planning, assignment and management of resources to support demands from operation and internal customer side
Leads local quality in operation engineering team
Ensures the compliance of frontend operation processes to international standards and / or customer requirements.
Develops and continuously improves the team and quality related business processes in frontend operation and aligns with other production sites.
Solves quality or process problems together with Fab team and drives continuous improvements.
Drives the implementation of corrective actions in case of external or internal complaints
Represents quality in different boards such as material review board, process change board or SPC board.
Drives quality control related projects regarding new processes, new products and continuous improvements.
Creates and updates quality specifications and documents
Leads or participate to task forces to solve quality issues and applies structured problem solving methods such as 8D
Optimizes defined gates regarding quality and efficiency
Supports customer and system audits
|
Quality Operation Frontend Manager (m/f/d)
|
Austria |
Quality |
2020-01-29 |
• Responsible for supporting requests falling under production fails, special FA requests, qualification failure analysis request and customer return failure analysis.
Responsible for supporting reliability qualifications, monitoring, risk assessment and special investigations for suspect materials within the accepted timeline
• Responsible in performing preventive maintenance on Failure Analysis and Reliability equipment. Responsible in performing key administrative tasks.
• Provides quality engineering support and work with ams AG internal organization to resolve quality issues at customer side and improve product quality in the field.
• Support taskforce any quality issues internally and externally through efficient and effective problem solving skills.
|
FAREL Technician
|
Philippines |
Quality |
2020-01-29 |
• Responsible for supporting requests falling under production fails, special FA requests, qualification failure analysis request and customer return failure analysis.
• Responsible for supporting reliability qualifications, monitoring, risk assessment and special investigations for suspect materials within the accepted timeline.
• Responsible in performing preventive maintenance on Failure Analysis and Reliability equipment
• Responsible in performing key administrative tasks.
• Provides quality engine
|
Staff Engineer FAREL
|
Philippines |
Quality |
2020-01-29 |
Work with OSAT in the various module PCBA assembly processes and SMT processes
Work with OSAT on the SMT various soldering materials
People leadership whereby you will lead and influence cross functional stakeholders (product development, engineering, quality assurance, supply chain management and suppliers) to ensure seamless transition from development to manufacturing
Supplier management skilled, capable in driving supplier to ensure products are manufactured based on ams requirements and delivered up to customer satisfaction
Manage issues and risk through proper risk identification and work closely with the team to drive closure of the risk items prior to ramp
Expert in managing information flows to ensure the right information is available and provided to the right person to make the right decision aligning to business line strategy
Management reporting and capable in develop and measure key performance indicators, responsible in weekly/ daily project progress updates to management
Maintain and follow through the product life cycle management including implementation of new product transfer methods, processes and checklist
Support and work with development team to do OEMD/ DFM review and perform package design challenge for manufacturability
|
Senior Staff Engineer, Module & SMT
|
Singapore |
Operations & Manufacturing |
2019-10-31 |
Able to carry out and fast react on the daily production line issue recovery.
Plan, coordinate and execute Equipment/ Maintenance integration improvement experiments to improve machine uptime.
Conduct data analysis and generate analytical reports
Lead and drive continuous yield improvement and defect reduction projects
Investigate line excursion issues and drive for solution
Facilitate technical discussions
|
Staff Engineer,Equipment
|
Singapore |
Operations & Manufacturing |
2020-01-28 |
Owing to our success our team is growing and we have an opportunity for a Project Manager of European R&D Funding/Subsidy projects.
In this role you will be responsible for the overall project administration and management support of H2020 and similar projects in the IKT/Photonics/Sensor domains and you can actively contribute to the preparation of other project proposals in close cooperation with the technical project coordinators, if and when required.
You will also:
Communicate with international project partners, prepare and process technical and financial reports, monitor project progress
Maintain and update project web page with information regarding teleconferences / project meetings / workshops / conferences
In project proposals preparation, monitor suitable European R&D&I funding schemes
Collection of information from partners, processing of written inputs and background documents;
Own the complete preparation and writing of respective parts of proposals and bring structure to these.
|
Project Manager of European R&D Funding projects (m/f/d)
|
Austria |
Research & Development |
2020-02-07 |
Responsible for the product development cycle and its activities, involved from design stage to the transfer to production.
Lead and participate in technical analysis, discussion and meetings.
Manage and drive cross functions product development activities to achieve targeted milestones.
Be the technical lead in customer’s meetings, and support the team in managing customer’s expectation and requirement.
|
New Product Development Engineer (Optics)
|
Singapore |
Research & Development |
2020-01-28 |
This position will serve as Senior Director of R&D Engineering our Business Line. This role supports management responsibilities for a large cross-functional team of highly skilled technical contributors and managers. The successful candidate must have demonstrated proficiency in engineering management and leadership.
In this role you will interface with a team of highly talented Engineers to continue in the pursuit of technical excellence and market leadership in a fast paced Optical Sensor Semiconductor environment, delivering products to multiple Tier1 OEMs in the Smartphone and consumer electronics space. A strong background in product development, engineering tools and processes, budget oversight, and functional management is a must – including skills associated with staffing and team development.
Plan, manage, and direct the overall product development engineering activities of the department
Coordinate the creation, development, design, and improvement of products in conformance with established processes and objectives. Develop and manage department budget.
Work with Business Line leadership and program teams to plan resource needs and manage staffing to accommodate those needs.
Monitor team activities to ensure compliance with development processes and quality standards.
Provide mentoring and career counseling for engineering staff as required
Support, communicate, reinforce and defend the mission, values and culture of the organization
Other duties as assigned
Actively support pursuit of new business by developing and presenting new concepts, technologies or applications
Develop trusted engineering contacts with the customer community
Participate in the preparation of proposals, including generation of engineering RFIs (Response for Information) from various customers. Analyze designs as necessary to ensure compliance with performance, cost, schedule, and risk objectives.
Open to travelling (roughly 25%)
|
Senior Director of R&D Engineering teams, Austria (m/f/d)
|
Austria |
Research & Development |
2020-01-31 |
First level support on test setup related product issues (Go/Nogo analysis), support product engineering and for product lot decision and disposition.
Follow up on execution of material review board on defined tasks.
Identify areas to improve quality and efficiency.
Responsible for completeness of test production data (Maps, Test data).
Problem analysis and support material review board disposition in case of yield and throughput issues.
Sustain the test program, hardware and setup issue.
|
Staff Engineer, Test Engineering
|
Singapore |
Operations & Manufacturing |
2020-01-27 |
Support manufacturing line operation. Assist manager in formulating and executing solutions to production line issues.
Plan dispatch, materials and supporting fixtures for daily production volume
Lead and execute safety and 5S initiatives
|
Manufacturing Engineer
|
Singapore |
Operations & Manufacturing |
2020-01-27 |
Ownership of Wafer Stacking process tool set
Monitor tool/process instability and develop action plans to reduce long-term stability issues
Monitor CpK and ownership of process control improvement plans
Lean manufacturing: identifying opportunities to eliminate waste within own tool set/process- operator time, process simplification, qualification optimisation
Reporting of scrap/rework and ownership of scrap/rework reduction plans
Driving actions and progress of related yield excursion
|
Staff Engineer, Process (Dicing/Stacking)
|
Singapore |
Operations & Manufacturing |
2020-01-27 |
To play the role of a process owner back-end area.
To provide daily monitoring of tool/process to ensure stability.
To participle in team to develop action plans to reduce long-term stability issues
Monitor CpK and ownership of process control improvement plans
Lean manufacturing: identifying opportunities to eliminate waste within own tool-set/process- operator time, process simplification, qualification optimization
Reporting of scrap/rework and ownership of scrap/rework reduction plans
To take ownership and follow through actions and progress of related yield excursions on associated process. Be the focal point and send updates on associated scrap incidents
Support cost reduction programs associated with process and materials.
Responsible for process training
Write detailed operation procedures for Tool Operation/OCAPS
|
Process Engineer
|
Singapore |
Operations & Manufacturing |
2020-01-27 |
Partner with cross-functional teams such as NPD, NPI, IE, QA, SCM, procurement, IT and within Operations teams to achieve successful new product ramp in mass production.
Manage, coordinate and support activities and resolve issues encountered during product transfer and production ramp.
Interface with project team/NPI on engineering validation test (EVT) builds. Take charge to lead design validation test (DVT) build and/or Ops build, work with internal teams to fulfill customer requirements on quality and shipments.
Interface with various divisions from customer side to achieve customer required milestones and at the same time balancing internal resources allocation.
Provide effective communication on program status and issues for internal management and customer, trigger escalation when needed.
|
Operations Program Engineer
|
Singapore |
Operations & Manufacturing |
2020-01-27 |
Technology development for CMOS postprocessing with focus on photonics which is done in close cooperation with Fab Engineering and external partners
Ensuring the interface to design, test and quality and track the completion of the project related tasks in accordance with the project plan
Characterization of the technology by test, analysis and work out in conclusive reports.
New innovative process and device concepts are submitted as patent proposals
Working in team-oriented atmosphere with a strong focus on thorough documentation and completing of projects timely and successfully
Leading work packages and project sub-teams
|
Sensor Processes R&D Engineer (m/f/d)
|
Austria |
Research & Development |
2020-01-27 |
Manage and lead Technology Quality Engineering
Establish and maintain high level Quality Engineering competency pool covering all ams technology areas (i.e. CMOS, VCSEL, Optical Elements, Assembly,…) to enable:
- Reasonable support of peak Quality Engineering demands, i.e. which cannot be sufficiently covered out of the Divisions and Operations, in particular:
a) PQE support for unplanned project opportunities
b) Task Force Support for unexpected quality excursions
Driving cross-learning and standardization (way of working, business processes, general quality requirements) across the ams Quality functions
Driving standardization of all ams technologies and definition of qualified building blocks, which in turn shall enable a high re-use factor, which in turn enables fast development cycles of innovative and robust products
Continuous improvement and harmonization way of working and business processes across ams Quality functions
Support Corporate M&A activities with Integration Activities, Contracts and Quality Agreements as needed
Act as pivot and facilitator for general Quality-related documents/contracts to align between the Quality functions, and to establish and maintain aligned “baseline requirements” profile to facilitate contract negotiations
Establish/expand and maintain Technology Reliability Engineering competency pool and infrastructure to
a) define and perform reliability characterization and reliability modelling for technology building blocks for all ams technologies (i.e. CMOS, VCSEL, Optical Elements, Assembly,…)
b)support other Quality functions in definition of Technology-specific quality requirements
|
Director, Technology Quality Engineering (m/f/d)
|
Austria |
Quality |
2020-01-24 |
Support our Legal Team in EMEA and work independently on various topics such as contract and document management for all our entities
Providing administrative support to our Legal EMEA team
Formatting, reviewing and editing of contracts and various other legal documents and arrange for proper processing within our team and group of companies
Independent correspondence with internal and external business partners, public authorities, subsidiaries and other departments with regard to contracts and legal documents and processes
Assisting in coordinating and organizing or workload and meetings for the Legal EMEA team
The contract is initially limited to one year
|
Assistant Legal (m/f/d)
|
Germany |
Central Functions |
2020-02-07 |
Review the submitted documents, check against the template and other relevant requirement
Perform Chinese translation/confirmation for certain document
Reject and communicate to originator if the requirement are not met
Monitor the document approval status, send weekly reminders to the approvers
Address to originator’s concern on status enquiries
Release documents and issue hardcopies for WDL line
Safety Data Sheet - Get new SDS from EHS, put into system and inform relevant department; monitor the expiry date and work with SCM to get the updated copy
Customer Document – Download document from customer portal, put into system and inform relevant department
|
EDM Administrator (Doc Control Specialist)
|
Singapore |
Supply Chain Management |
2020-01-15 |
To establish local sourcing strategies for all Spend categories such as Equipment and indirect services (office lease, HR & IT related services, office facility upkeep, Marketing, Professional services, etc to achieve best value for ams)
To be part of Global team in participation in Commodity Strategies development and sourcing strategies implementation.
To provide local market knowledge / intelligence
Work with cross-functional stakeholder to establish and implement Procurement framework and processes to improve productivity.
Identifying and implementing cost reduction opportunities across equipment and services. Ensure best overall value is achieve.
Leveraging Company spend nationally and globally to ensure financial benefit to the company.
Developing and leading a competitive supplier selection process– bids and commercial negotiations.
Always in the mood of Identifying, benchmark, and selection of new sources of supply
Commercial Contract negotiation.
Implementation of Global contract pricing.
Implementation of JIT and Consignment program
Responsible for Supplier Performance measurement and drive improvement. Work together with cross function team to resolve supplier performance issues.
Conduct supply risk assessments, establish and drive mitigation plans accordingly.
PO issuance to Supplier and resolving Invoices issue.
Weekly and Monthly performance reporting.
|
Senior Specialist, Procurement
|
Singapore |
Supply Chain Management |
2019-08-14 |
Procurement for Indirect Categories specifically for Professional and Business Services
(HR related, Finance related, IT, Energy, facility, Lease, Cleanroom consumables, Travel etc)
Drive the Sourcing Process and ensure fairness and transparency in Supplier selection and proper benchmarking on Capability & commercial
Drive Alignment with global / regional stakeholder on procurement strategies and lead execution on respective site tactics to achieve Lower Total Cost of Ownership
Work effectively with internal stakeholders cross-functionally and cross-regionally, as well as those of external partnerships who are critical in meeting Key business objective
Responsible for Supplier performance and Conduct periodic Business review, driving Supplier on improvement plan to close Performance gaps. Conduct supply risk assessments, establish and drive mitigation plans accordingly
|
Senior Specialist(A), Indirect Sourcing
|
Singapore |
Operations & Manufacturing |
2020-01-14 |
- Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime
-Conduct installation, hook-up & retrofit of new equipment.
- Establish work procedures, corrective actions and preventions Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
- Participate in continuous improvement programs to improve productivity and output quality of the Module
|
Maintenance Engineer
|
Singapore |
Operations & Manufacturing |
2020-01-14 |
Strong team member, able to carry out task and duties assigned within the team.
Experience in semiconductor process, especially in process integration role.
Relevant experience with compound semiconductor.
Actively participate in continuous improvement project, learning and skill development
Work with process engineer to develop setup wafer fab process in terms of quality, efficiency, yields, safety and other aspects for manufacturing of III-V compound products
|
Staff Process Integration Engineer
|
Singapore |
Operations & Manufacturing |
2020-01-14 |
Team Management:
• Support, strengthen and lead the team in the region
• Provide guidance, be the first contact person for any kind of queries
• Solve problems, make competent decisions and manage the team wisely in order to achieve maximum results
• Prepare and analyze Regional Reports
• Conduct yearly Performance Management Meetings
• Report to Sen.Manager Customer Service
Customer Bonding:
• Communicate with customers on a regular basis and respond to specific queries
• Participate in customer review meetings, understand customer profiles and strategic plans
• Build and maintain strong and long lasting customer relationships
Supply Chain Coordinator
• Understand customer issues, help to provide solutions, obtain and share customer intelligence with Sales
• Trusted advisor for customers, Sales and Operations for any customer supply related matter
Proactive Order Management
• Monitor customer order book
• Act as intermediary between Sales, Customer and BL to ensure orders are placed on time and delivery schedules can be secured
• Closely follow-up on critical shipments
• Support the OTC process
Crossfunctional Cooperation
• Close cooperation with all relevant departments and colleagues (Account Management, BL Operations, Logistics, Finance, …)
|
Customer Service Manager Asia
|
Taiwan |
Customer & Sales Support |
2020-01-13 |
Bachelor Thesis in Reliability Testing: enabling power supply and communication monitoring during biased stress test execution
AMS is qualifying numerous ICs and products each year. The successful and timely product qualification execution is crutial to bring product to market. Biased Reliability Testing is one of the most important and technical challenges need to be addressed. Bias and dynamic stimuli are provided to several devices in parallel while heat is applied inside a chamber. The aim of the thesis is to enable monitoring for reliability equipment.
The role will consist in defining, testing and releasing the appropriate HW (PCB with microcontrollers, drivers, external systems...) and SW to fit all products.
|
Bachelor Thesis / Intership in Reliability Testing
|
Austria |
Quality |
2020-01-13 |
Corporate Support of Digital Design Kit, Design Tools and Design methodology.
Tool Evaluation and Implementation
to the ams digital Design flow Design
Tools Training and Mentoring
Digital Design Project Support
|
Staff Engineer, Digital Design Support
|
India |
Research & Development |
2020-01-09 |
Review, Challenge and contribute to Digital Design projects
Responsible for reviewing, coaching and support of digital design for key projects
Ensure digital design is performed in conformance with internal and external engineering standards
Contribute to ams best practice in digital design
|
Senior Principal Digital Design Engineer (m/f/d)
|
Switzerland |
Research & Development |
2020-01-08 |
Review, Challenge and contribute to Digital Design projects
Responsible for reviewing, coaching and support of digital design for key projects
Ensure digital design is performed in conformance with internal and external engineering standards
Contribute to ams best practice in digital design
|
Senior Principal Digital Design Engineer (m/f/d)
|
Austria |
Research & Development |
2020-01-08 |
Coordination of industrialization / ramp up phase of development projects
Development and Coordination of internal continuous improvement projects within division (incl. IT projects)
Establish project plans (check for logistic constraints, resources, lead-times, etc.) with customer and team
Coordinate project ramp (milestone monitoring, project plan, device specifications, delivery schedules)
Support the supply planning for key customers
Ensure information flow within team and with service providers
Request and coordinate production resources for project
Crisis Management
Continuous Improvement of Business Processes
|
Industrialization Engineer (m/f/d)
|
Austria |
Supply Chain Management |
2019-12-23 |
To support the ongoing projects and the definition of new and innovative products for the automotive market, we are looking for an
Automotive 3D Systems Architect (100%)
Responsible for the development of innovative components for 3D imaging systems based on time-of-flight, active stereo and structured light ranging techniques
Definition of product architectures and detailed key requirements for each system sub-components
Technical lead of engineering team during product development
Modelling of complete electro-optical 3D imaging systems, performance prediction and optimization of system parameters
Provide comprehensive documentation of the product architecture, verification and validation of the system
Play a key role in defining next-generation 3D imaging products
As a member of our team, the candidate will have a wide and varying set of responsibilities as our organization grows and evolves. These may include:
Work with cross-functional team on the development of highly innovative components for 3D imaging systems, mainly for the automotive market
Contributing to the ongoing creation of a positive, productive work environment
|
3D System Architect for Automotive
|
Switzerland |
Research & Development |
2020-01-07 |
To support the ongoing projects and the definition of the business line's requirement engineering flow , we are looking for a Requirements Engineer (100%)
Responsible for adjusting the requirement engineering cycle for each type of product platform/family/customer.
Responsible for the identification and documentation of the functional and non-functional requirements of a product.
Tracks requirements from customer and design to verification and validation/test.
Report creation for tracking the status and quality of the requirements and the overall project.
Adapts documentation/reports/workflow to the business unit needs.
Interaction with colleagues from international sites.
Data processing of technical data.
Create, organize and maintain correlation for optical test data.
Communicate report status periodically to the assigned projects.
Continous evaluation of the Requirements Engineering process followed, to identify improvemnts, efficieny gaps, communication flows, etc.
Contribute to project management forecast processes and other administrative tasks.
|
Requirements Engineer
|
Switzerland |
Research & Development |
2020-01-07 |
Review, Challenge and contribute to planning of projects.
Responsible for reviewing, coaching and support of project management for key projects
Ensure project management is performed in conformance with internal and external engineering standards
|
Principal Project Manager (m/f)
|
Switzerland |
Research & Development |
2020-01-08 |
Organisation und Koordination von Meetings
Allgemeiner Schriftverkehr
Bestände wie Büromaterialien führen und beschaffen
Arbeiten im Rahmen des Zahlungsverkehrs durchführen
Administrative Tätigkeiten und Unterstützung der Facility-Abteilung
Arbeiten im Postein- und -ausgang erledigen
Kunden und Lieferanten informieren und betreuen
|
Lehrling Bürokauffrau/-mann Facilities (m/f/d)
|
Austria |
Central Functions |
2019-12-20 |
|
|
Skilled Officer, Warehouse
|
Singapore |
Supply Chain Management |
2020-01-02 |
Überwaschen, Bedienen und Programmieren von Leittechnik und SPS-Systemen
Anlagenbetreuung sowie Wartung und Durchführungen von Überprüfungen im Bereich Lüftungs- und Elektrotechnik
Dokumentation und Datenpflege
Verfolgung, Unterstützung und Umsetzung von technischen Neuerungen und Projekten
Wartung, Kalibrieren und Einstellen von Instrumenten und Elektrogeräten
Montieren, Installieren und Reparieren von elektrische und elektrotechnische Bauteile und Anlagen
|
Lehrling im Beruf Elektrotechnik - Elektro- und Gebäudetechnik (m/f/d)
|
Austria |
Central Functions |
2019-12-23 |
Bestände wie Büromaterialien führen und beschaffen
Vorbereitung und Betreuung von Kundenbesuchen
Arbeiten im Rahmen des Zahlungsverkehrs durchführen
Organisation und Buchung von internationalen Geschäftsreisen
Administrative Tätigkeiten für die Produktion
Arbeiten im Postein- und -ausgang erledigen
|
Lehrling Bürokauffrau/-mann
|
Austria |
Operations & Manufacturing |
2019-12-20 |
Überwaschen, Bedienen und Programmieren von Leittechnik und SPS-Systemen
Anlagenbetreuung sowie Wartung und Durchführungen von Überprüfungen im Bereich Lüftungs- und Elektrotechnik
Dokumentation und Datenpflege
Verfolgung, Unterstützung und Umsetzung von technischen Neuerungen und Projekten
Wartung, Kalibrieren und Einstellen von Instrumenten und Elektrogeräten
Montieren, installieren und reparieren von elektrische und elektrotechnische Bauteile und Anlagen
|
Lehrling im Beruf Elektrotechnik - Automatisierungs- und Prozessleittechnik (m/f/d)
|
Austria |
Central Functions |
2019-12-20 |
Bedienung und Wartung der technischen Anlagen zur Wasseraufbereitung, Abwasserbehandlung und Chemieversorgung
Durchführung von Instandhaltungsarbeiten an den Anlagen
Dokumentation von Wartungsarbeiten
Durchführung von Messungen
Arbeiten an Prozessleitsystemen, Bildschirmen und computergesteuerten Anlagen
Mitarbeit bei Aus- und Umbauprojekten der Chemie-Gruppe
|
Lehrling Chemieverfahrenstechniker (m/f/d)
|
Austria |
Central Functions |
2019-12-20 |
Durchführung von analytischen Bestimmungen (Umweltproben bzw. Qualitätssicherung)
Chemische Analytik: (Titrationen, Photometrie, instrumentelle Analytik, etc.)
Probenahme und vor-Ort Messungen
Herstellung von chemischen Zubereitungen
Dokumentation und Bewertung von Analysenergebnissen
Mitarbeit bei Projekten der Chemie-Gruppe und der Abfallwirtschaft
|
Lehrling Chemielabortechniker (m/f/d)
|
Austria |
Central Functions |
2019-12-20 |
Work closely with NPD team/customer on defining testing process specifications and work instruction, formulate testing processes control plan and procedures
Work with NPD team and vendors to carry out test tooling bring-up, qualification and buyoffs, develop enablers to improve testing tooling efficiency
Liaise with Ops test team to troubleshoot the testing process problems, conduct failure analysis and guide ops engineers to conduct continuous improvement to achieve yield,, quality and cost goals
|
Staff Engineer, NPI Test
|
Singapore |
Operations & Manufacturing |
2019-12-20 |
Work closely with NPD team/customer on defining testing process specifications and work instruction, formulate testing processes control plan and procedures
Work with NPD team and vendors to carry out test tooling bring-up, qualification and buyoffs, develop enablers to improve testing tooling efficiency
Liaise with Ops test team to troubleshoot the testing process problems, conduct failure analysis and guide ops engineers to conduct continuous improvement to achieve yield,, quality and cost goals
|
Snr. Staff engineer, NPI Test
|
Singapore |
Operations & Manufacturing |
2019-12-20 |
Strategic purchasing of Investment materials such as production and facility equipment/parts
Strategic purchasing of purchased services such as consulting and development projects, etc
Work with internal technical departments to properly source equipment and tools
Negotiate supplier contracts for equipment or services in accordance with ams requirements
Support the technical teams with negotiating the agreement of the needed technical performance
Support the non-strategic purchasers for smaller services and materials in case of escalations
Claim management and the hereto belonging negotiation of compensation
Release orders and monitor the timely follow up on agreements made together with project owner
|
Senior Specialist, Strategic Buyer Capex & Purchased Services (m/f/d)
|
Austria |
Central Functions |
2019-12-19 |
System-on-Chip architecture together with domain experts (hardware, software/firmware).
Software design and implementation for a broad spectrum of systems (firmware, drivers, mobile phone applications, PC GUIs, tooling scripts)
Specification, implementation, execution and automation of system and software tests.
Creation and review of technical documents.
Implementation and improvement of quality focused engineering workflows.
|
Senior Software Developer (m/f/d)
|
Austria |
Research & Development |
2019-12-19 |
This position will serve as Senior Director of Engineering for the Integrated Optical Systems (IOS) Business Line. This role supports management responsibilities for a large cross-functional team of highly skilled technical contributors and managers. The successful candidate must have demonstrated proficiency in engineering management and leadership. In this role you will interface with a team of highly talented Engineers to continue in the pursuit of technical excellence and market leadership in a fast
paced Optical Sensor Semiconductor environment, delivering products to multiple Tier1 OEMs in the Smartphone and consumer electronics space. A strong background in product development, engineering tools and processes, budget oversight, and functional management is a must – including skills associated with staffing and team development.
Plan, manage, and direct the overall product development engineering activities of the department
Coordinate the creation, development, design, and improvement of products in conformance with established processes and objectives
Develop and manage department budget
Work with Business Line leadership and program teams to plan resource needs and manage staffing to accommodate those needs
Monitor team activities to ensure compliance with development processes and quality standards
Participate in the preparation of proposals, including generation of engineering RFIs (Response for Information) from various customers
Analyze designs as necessary to ensure compliance with performance, cost, schedule, and risk objectives
Attend appropriate engineering, customer, and business meetings
Actively support pursuit of new business by developing and presenting new concepts, technologies or applications
Develop trusted engineering contacts with the customer community
Provide mentoring and career counseling for engineering staff as required
Support, communicate, reinforce and defend the mission, values and culture of the organization
Other duties as assigned
|
Senior Director of Engineering
|
United States |
Research & Development |
2018-08-20 |
Responsible to define yield target for new product and develop roadmap for continuos yield improvement.
Interface with multiple stakeholders from Design, New Product Development, Test, Packaging, Reliability, Operations and Quality Engineering teams to support new product development, product qualification and ramp up activities, ensuring product meeting commited timeline and achive best in class yield and quality.
Compile and analyze data using common statistical anlysis methodology and effectively present key results & conclusion along with recommended actions.
Analyze products to ensure manufacturability and data sheet compliance, this includes supporting design challenge, OEMD, DFM review etc, continuously feedback to development team.
Lead cross functional team to solve yield issue, manage excursions and questionable material disposition.
Assume product ownership after product release and acts as a central interface for all product issues
Engage in group problem-solving and process improvement projects.
Employ appropriate Statistical Process Control (SPC) principles to reduce variability in product performance.
Interface with development team to drive effective FMEA’s and risk reduction assessment
|
Product Engineer
|
Singapore |
Operations & Manufacturing |
2019-12-18 |
Work with OSAT / NPD in the various module die attach processes and datacon processes.
Develop in house process and materials development for the datacon various tooling and materials
Lead and influence cross functional stakeholders (product development, engineering, quality assurance, supply chain management and suppliers) to ensure seamless transition from development to manufacturing
Supplier management skills, capable in driving supplier to ensure products are manufactured based on ams requirements and delivered up to customer satisfaction
Manage issues and risk through proper risk identification and work closely with the team to drive closure of the risk items prior to ramp
Expert in managing information flows to ensure the right information is available and provided to the right person to make the right decision aligning to business line strategy
Management reporting and capable in develop and measure key performance indicators, responsible in weekly/ daily process progress updates to reporting manager.
Maintain and follow through the product life cycle management including implementation of new product transfer methods, processes and checklist.
Support and work with development team to do OEMD/ DFM review and perform package design challenge for manufacturability
|
Staff Engineer
|
Singapore |
Operations & Manufacturing |
2019-12-18 |
A technical background educated to university degree level
Wafer Fab process background is a must. Experience with III-V opto-semiconductors beneficial for role.
Knowledge of the product development process; test and/or fab experience beneficial.
Experience in failure analysis of ICs, semiconductor products, VCSEL, LED
Ability to work on their own on analytical challenges and efficient problem solving.
Excellent English spoken and written
Well versed with FMEA, control plan, 8D, root cause analysis, SPC, DOE.
PC literate with a working knowledge of spread sheets and data analysis tools (JMP, Minitab, Excel, etc.)
Pro-active attitude with a holistic approach to problem solving in a highly competitive and complex environment
Entrepreneurial mindset, team player
Able to work independently
|
Senior Project Manager VCSEL
|
Singapore |
Research & Development |
2019-08-08 |
Communicate with EPI design group for EPI structure detail and EPI development plan
Develop and create growth recipe and EPI process flow for both R&D and production EPIs
Implement risk assessment for each individual process steps for process fabrication.
Working with VCSEL team to qualify new EPI product
Improve on quality of product and reproducibility of the product for mass production.
Build strong wafer fabrication environment that comply with quality standards ISO/TS16949.
Define process yield target and Implement continuous improvement approach for existing product
Manage EPI process development, implementation, and documentation
|
Staff Engineer, Product Development
|
Singapore |
Research & Development |
2019-08-08 |
Assist to develop and execute company environmental, health and safety (EHS) plans and policies, and coordinate programs that ensure safe working conditions
Coordinate and work with process owners and stakeholders on EHS and related permits, licences and certificates application and maintenance.
Handle accident reports including directing investigations, records filing and identify strategies for preventing future accidents to ensure effective closure.
Maintain the company fire safety & emergency planning program including setting up response plan, testing readiness, ensure preparedness, facilitate awareness and ensuring compliance to the fire safety maintenance process.
Received and work with stakeholders to close safety feedbacks in person or anonymously.
Any other duties and responsibilities as assigned by the EHS Manager & Facilities Director.
|
Staff Engineer
|
Singapore |
Central Functions |
2019-12-18 |
Assist to develop and execute company environmental, health and safety (EHS) plans and policies, and coordinate programs that ensure safe working conditions.
Administering such as EHS Meeting, EHS Inspection, Behavioural Base Safety Observation, Annual EHS Campaign, EHS Management Review and other EHS related activities.
Assist in coordinate and work with process owners and stakeholders on EHS and related permits, licences and certificates application and maintenance.
Ensure continual improvement of risk assessments process.
Administering and coordinate, work with stakeholders and support the ISO 14001 & 18001/45001 certification programs.
Administering and inspect compliance on the company permit-to-work system and ancillary procedures.
Administering and handle accident reports including directing investigations, records filing and identify strategies for preventing future accidents to ensure effective closure.
Administering and maintain the company fire safety & emergency planning program including setting up response plan, testing readiness, ensure preparedness, facilitate awareness and ensuring compliance to the fire safety maintenance process.
Received and work with stakeholders to close safety feedbacks in person or anonymously.
Administering of the EHS Committee and implement best practices in facility so as to achieve a safer working environment.
|
Graduate Engineer
|
Singapore |
Central Functions |
2019-12-18 |
Ensure that the right product is developed to meet or exceed company's quality standard and is delivered at the right time
Lead the project is to achieve its target schedule & budget and against phase review objectives, reporting status to supervisor on a regular basis and executive staff on an as needed basis
Facilitate the communication and interaction among the functional representatives
Develop and implement recovery plans for off-schedule and unanticipated eventualities
Contribute and act as team player with a visible “what ́s best for ams” mentality
|
Project Manager (VCSEL)
|
Singapore |
Research & Development |
2019-12-18 |
In depth knowledge in wirebond process. Prefer work in new product development area.
Review process requirement, customer specification and standard.
Strong technical expertise in new recipe setup, process issue troubleshooting, yield improvement and generate technical report.
Qualification of new equipment, direct/in direct material, tooling to meet business need.
Interface with MP to ensure smooth transition of new product from NPD to MP
strong technical analysis competency with use of analysis tools like SPC, JMP, mini-tab
knowledge of FMEA, tolerance analysis, fish-bond analysis, as well as 8D report for customer complaint
|
Senior Staff Engineer
|
Singapore |
Research & Development |
2019-12-18 |
Strategise and develop testing technology based on internal technology and product roadmap, vast test technologies including electrical, optical, software, algorithm and systems
Strategise and develop Sensor and Illuminator test methodology and test equipment for entire product lifecycle at different phases of build
Strategise and manage activities for the development, characterization, and implementation of new test equipment, probe cards, jigs and fixtures, test concepts, methods, programs and systems integration into production
Define equipment requirements and specifications used in the manufacture, fabrication and evaluation of Sensor & Illumination devices
Ensure the optimal application of technology to meet product development and/or customer requirement. Develop probecard, fixtures, jigs and test equipment for Sensor & illuminator testing including test handler and tester perspective
Review test program and optimization to meet product development and/or customers requirement
Recommend and prepare changes, additions, and modifications which will optimize processes, enhance yields, reduce costs and improve the manufacture of product / processes
Ensure compliance with all relevant internal procedures, policies, documentation and quality system
Technical lead in a diverse team environment that includes interactions with suppliers, internal and external customers, as well as production personnel
|
Test Development Manager
|
Singapore |
Research & Development |
2019-12-18 |
Responsible to define yield target for new product and develop roadmap for continuos yield improvement.
Interface with multiple stakeholders from Design, New Product Development, Test, Packaging, Reliability, Operations and Quality Engineering teams to support new product development, product qualification and ramp up activities, ensuring product meeting commited timeline and achive best in class yield and quality.
Compile and analyze data using common statistical anlysis methodology and effectively present key results & conclusion along with recommended actions.
Analyze products to ensure manufacturability and data sheet compliance, this includes supporting design challenge, OEMD, DFM review etc, continuously feedback to development team.
Lead cross functional team to solve yield issue, manage excursions and questionable material disposition.
Assume product ownership after product release and acts as a central interface for all product issues
Engage in group problem-solving and process improvement projects.
|
Product Engineer
|
Singapore |
Operations & Manufacturing |
2019-12-17 |
Support existing IPs in projects
Develop and support new IPs in the area of Memories and digital IPs
Develop test concepts of IPs
Test and evalute IPs
Define quality rules for IPs
|
Mixed Signal Design Engineer (m/f/d)
|
Austria |
Research & Development |
2019-12-17 |
Responsible for Facilities for both AMK and WDL sites.
Responsible for facilities equipment, cleanroom hook-up and related building projects
Coordinate system repairs and monitor system performance
Maintain adequate parts inventory and order items as necessary
Manage facilities and building maintenance, supplies and services contracts and deliverables
Oversee and supervise team of facilities engineers and technicians as well as training.
Plan, track and manage facilities budget (capital & expense budget) including costs reduction initiatives
Conduct and document regular facilities and equipment inspections and audits
Ensure compliance with all building, EHS and security standards, industry codes and protocols
|
Facilities Manager
|
Singapore |
Operations & Manufacturing |
2019-12-17 |
Lead the development and implementation of sourcing strategies, in collaboration with Business Units, R&D and Operation, and establish global supplier network capabilities for assigned categories to achieve key business objective of Time to Market, Total Cost of Ownership and Supply Continuity
Communicate and execute category strategies across the organization, with Business Units and NPI Operation, to ensure sourcing decisions and product development aligns with strategic supplier selection
Drive Alignment with global / regional stakeholder on procurement strategies and lead execution on respective site tactics to achieve Lower Total Cost of Ownership
Build and sustain a strong supplier relationship.
Responsible for Supplier performance and Conduct periodic Business review, driving Supplier on improvement plan to close Performance gaps
Business contract review and negotiation
PO issuance to Supplier and resolving Invoices issue.
Weekly and Monthly performance reporting.
Total Category Ownership
|
Senior / Specialist, Capex
|
Singapore |
Operations & Manufacturing |
2019-12-17 |
People leadership whereby you will lead and influence cross functional stakeholders (product development, engineering, quality assurance, supply chain management and suppliers) to ensure seamless transition from development to manufacturing
Supplier management skilld, capable in driving supplier to ensure products are manufactured based on ams requirements and delivered up to customer satisfaction
Manage issues and risk through proper risk identification and work closely with the team to drive closure of the risk items prior to ramp
• Expert in managing information flows to ensure the right information is available and provided to the right person to make the right decision aligning to business line strategy
• Management reporting and capable in develop and measure key performance indicators, responsible in weekly/ daily project progress updates to management.
• Maintain and follow through the product life cycle management including implementation of new product transfer methods, processes and checklist.
|
NPI Project Manager
|
Singapore |
Operations & Manufacturing |
2019-12-12 |
• People leadership whereby you will lead and influence cross functional stakeholders (product development, engineering, quality assurance, supply chain management and suppliers) to ensure seamless transition from development to manufacturing
• Supplier management skilld, capable in driving supplier to ensure products are manufactured based on ams requirements and delivered up to customer satisfaction
• Manage issues and risk through proper risk identification and work closely with the team to drive closure of the risk items prior to ramp
• Expert in managing information flows to ensure the right information is available and provided to the right person to make the right decision aligning to business line strategy
• Management reporting and capable in develop and measure key performance indicators, responsible in weekly/ daily project progress updates to management.
• Maintain and follow through the product life cycle management including implementation of new product transfer methods, processes and checklist.
|
NPI Project Manager
|
Singapore |
Operations & Manufacturing |
2019-12-12 |
1. Establish, implement and improve Product Quality assurance and control process to ensure product conforming to establish specification and standard.
2. Lead quality related feedback investigation through collaborating with cross-functional team using 8D approach.
3. Drive continuous improvement activities to reduce quality issues and CONQ
4. Analyze quality performance utilizing statistical and analytical tools and methods
5. Manage and handle onsite customer expectation, requirements and generate Quality Reporting
6. Participate in the development and refinement of Design and Process FMEA’s (Failure Mode and Effects Analysis) for new product and existing product.
|
Quality Staff Engineer
|
Singapore |
Quality |
2019-11-21 |
Title: Evaluation of electro-thermal influenced reliability effects using Cadence Legato tool
Brief description:
Operation of integrated semiconductor components like MOSFETs is underlying performance losses due to applied stress (electrical fields, temperature). This effect is called device degradation or aging and causes shifts of device dominant parameters like threshold or mobility. For an IC (integrated circuit) developer it is highly important to have a simulation possibility that predicts these shifts. The investigation and benchmarking of such a simulation tool is the aim of this thesis.
Research areas:
Degradation mechanisms in MOS devices
Electro-thermal solver concepts
New age industry tool for reliability analysis
Literature study on reliability effects and electro-thermal behavior
Reliability model implementation
Reliability simulation suite definition and implementation
Scripting for automation of the simulation flow
Legato tool evaluation, benchmarking and calibration.
Legato tool implementation to ams reliability and electro-thermal flow
|
Master Thesis Student for Thermal aware reliability simulation (m/f/d)
|
Austria |
Research & Development |
2019-12-10 |
Support existing IPs in projects
Develop and support new IPs in the area of Oscillators and PLLs
Develop test concepts of IPs
Test and evalute IPs
Define quality rules for IPs
|
Analog Design Engineer (m/f/d)
|
Austria |
Research & Development |
2019-12-09 |
Technical leadership of corporate validation activities
Define and develop post silicon validation systems
Specify, develop and maintain validation SW frameworks and libraries
Create standardized validation concepts, procedures, templates and guidelines
Lead global and cross divisional validation working group
|
Senior Staff Validation Engineer (m/f/d)
|
Austria |
Research & Development |
2019-12-09 |
Support of project team in product development phase and deep understanding of test concepts and test strategy commonly used in ATE
Challenge product development team in respect to design for test throughout
Collaborate tightly with test program development engineer
Ramp-up support (Guiding safe launch phase for automotive products; Yield and throughput monitoring)
Production- and test process support during product lifetime
Yield Enhancement for integrated circuits and sensors (Review production costs and define and drive test optimization programs; Support analysis of field returns)
Develop test driven analysis methodologies
Co-operation with various departments in the continuous quality improvement program
Reporting to management
|
Staff Product Engineer EAS (m/f/d)
|
Austria |
Operations & Manufacturing |
2019-12-05 |
Process engineer with extensive hands on knowledge in semiconductor process such as (not limit to) photo-lithography, PECVD, RIE, E-beam evaporation, process control and data analysis. Hands-on experience with semiconductor process equipment and its components. In-depth knowledge of compound semiconductor device process, failure diagnosis and analytical techniques. Candidate is expected to demonstrate capability to lead sub-projects defining and communicating tasks for a cross-functional engineering team.
Candidate is expected to demonstrate capability to lead sub-projects defining and communicating tasks for a cross-functional engineering team. Must possess excellent communication skills, demonstrate technical problem solving experience, be confident in working at a fast pace environment.
Job duties will include (but not limit to):
Responsible for leading the development and defining wafer fabrication processing for VCSEL lasers.
Responsible for leading the development of unit process blocks and working with the process and design teams.
Take technical ownership of wafer process area and related process development activities; working closely with device design engineers to realize new device structures into the wafer fab process.
Develop process/product yield improvement plans in close cooperation with device design engineers, coordinate FMEA activity and support failure analysis.
|
Process Engineer
|
United States |
Research & Development |
2019-12-05 |
AMS is seeking a highly skilled and motivated Equipment Engineer in Mercerville, New Jersey. This position’s primary responsibility is to support equipment’s preventive maintenance, corrective maintenance, upgrades, modifications and new tools acquisition and installation. The candidate will have the opportunity to work with the technical support groups to identify, lead, and implement creative solutions to improve equipment performance and reduce cost. This position will be responsible for all kinds of sem
Ability to multi-task and quickly adapt to changing priorities.
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety and Security requirements and programs.
• Strong Electronic and vacuum, mechanical troubleshooting skills.
• Experience in leading teams with an emphasis on project leadership fundamentals, effective communication and spending justification.
• In-depth knowledge of Predictive and Preventive Maintenance techniques.
Prioritize and run daily operation and maintenance teams daily resources on shift to ensure efficient floor operations includes internal and vendor resources
• Reduce unplanned down time and improve planned down time predictability
• Work with management team and operations to drive continuous improvement, standardization, cost reduction and operational efficiency within operation and maintenance
• Support installation of new equipment as well as sustaining of existing tools.
|
Facility Engineer
|
United States |
Research & Development |
2019-12-05 |
Lead and drive new VCSEL products development life cycle from product definition to mass production, following internal product development process & procedure
Coordinate among all cross functional team (PM, supply chain, production, quality, IT) to ensure on time completion of engineering builds
Plan micro build schedule for each engineering build & track build status
Track major issues during development; work with various engineering team (process, test, FA etc.) to identify root cause & implement corrective action
Prepare product specific document (process control plan, POR track, BOM etc.)
Support & handle communication with customer on product development specific topics (engineering build status review, major issue review etc.)
Support supplier development for outsourced processes
|
Process Development Manager
|
Singapore |
Research & Development |
2019-12-05 |
BS/MS degree in engineering or a related discipline and/or have demonstrated increasing levels of technical management responsibilities.
Significant experience in development and technology transfers as well as on-going process/defect matching and performance improvement is required.
Person must have a strong knowledge of project/program management/integration skill, systems and tools. Having a strong working knowledge of technology transfers.
Working experience with RnD and High Volume Manufacturing (HVM) is required
Prior people management with strong leadership is essential and strong technical depth in process/yield engineering is a must.
Candidates need to have demonstrated the ability to lead technical taskforces and resolve complex technical issues.
Leadership in global or regional will be added advantage.
Experience with opto-semiconductors beneficial for role
Excellent English spoken and written
Pro-active attitude with a holistic approach to problem solving in a highly competitive and complex environment
Entrepreneurial mindset, team player
|
Senior Project Manager VCSEL
|
Singapore |
Research & Development |
2019-12-05 |
Responsible for dispensing and replication process development that includes epoxy jetting/dispensing and alignment processes
Develop and qualify effective process to meet product design requirements
Support qualification builds
Equipment and material selection for new product design and work with suppliers for resolution of machine and material related issues in timely manner
Design tools and fixturing to enhance replication process
Ensure UPH and process are optimized for mass production sc
|
Staff Engineer, Process Development
|
Singapore |
Research & Development |
2019-12-05 |
- Establish project plans with TPL (Technical Project Leader), check for logistic constraints, resources, lead-time, etc.
- Drive project execution according to Engineering process (ENG-1)
- Track and report projects according to quality standards
- Trigger and follow-up all actions which arise from project meetings
- Coordinates activities between the different groups (e.g. design, application, product management, operations, assembly, quality and marketing)
- Completes and supports project risk assessments. Escalates issues as required to ensure successful project execution
- Defines resource requirements, gaps and contingency plans
- Responsible for all aspects of the program to ensure success – identifying critical path, critical risks
- Understand barriers, challenges, and trade-offs in all functional areas (chip design, test development, application, SW, firmware, Product & Test Engineering, quality, sourcing, customer engineering, marketing, etc.) in order to maintain a coherent plan for delivering to schedule, product cost and revenue
- Troubleshoots program issues at both a managerial and technical level and helps to develop alternative program tasks, schedules, milestones, resource plans, processes etc. to resolve program issues and conflicts
- Lead problem resolution, identifying required resources, tasks and investigation paths to quickly solve issues to maintain schedule through end product productions and market launch
|
Project Manager
|
United States |
Research & Development |
2018-01-14 |
Lead and manage the Product Quality Engineering team in Premstätten
Responsible for planning, assignment and management of resources to support demands of internal customers like Business Lines and R&D
Develops and continuously improves the team and associated business processes to provide best support for internal and external customers
Provides support to the team (as needed) in technical consulting and decision making
Develops qualification strategy for assigned projects. Plans, supervises and coordinates qualification execution in cooperation with reliability test laboratories - ensuring first time right.
Drives correct and timely execution of new product and technology development projects
Leads Task Forces to solve quality issues, applies structured problem solving methods (8D approach)
Drives and manages quality and reliability issues, as well as continuous improvement in all areas of interest
Represents Quality in internal and external meetings and events
|
Director Product Quality Engineering (m/f/d)
|
Austria |
Quality |
2019-12-02 |
Are you looking to take on a new technical challenge in your career?
Do you want to drive the development of our complete test solutions from design to manufacturing? When you start in this role your contribution will have an impact on bringing about the next generation of image sensors for our global customers.
Your Responsibilities:
Project planning, quotes for target test times, development costs and efforts.
Development of test concepts in co-operation with design, customer and suppliers.
Working in close co-operation with the IC design team to ensure testability, test effectiveness and test coverage.
Definition & continuous improvement of ATE based CMOS image sensor test hardware.
Design & reviews of test interface circuitry (load board) & probe card design for wafer level testing.
Development & release of test hardware and software.
|
Test Development Engineer
|
Belgium |
Research & Development |
2019-11-29 |
|
|
Technical Marketing Manager, Image Sensor
|
China |
Marketing & Strategy |
2019-11-29 |
Take lead of the talent acquisition activities for the ams India organization, lead the recruitment process from job briefing to final offer;
Work closely with stakeholders to determine core competencies, skills and experiences for vacancies;
Develop and execute sourcing strategies to identify and attract top talents in the market;
Communicate, engage and manage candidates throughout the process at all levels;
Provide status reports of open vacancies to HR team, hiring managers, and business leaders;
Serve as ams ambassador, guardian of caliber, culture fit, diversity and candidate experience through the recruitment process;
Work with global talent acquisition team and address talent acquisition excellence topics;
Support HR Generalist and HRBPs on general HR matters.
|
Senior Speicialist, Talent Acquisition
|
India |
Human Resources |
2019-11-28 |
Procurement for Indirect Categories specifically for Professional and Business Services
(HR related, Finance related, IT, Energy, facility, Lease, Cleanroom consumables, Travel etc)
Drive the Sourcing Process and ensure fairness and transparency in Supplier selection and proper benchmarking on Capability & commercial
Drive Alignment with global / regional stakeholder on procurement strategies and lead execution on respective site tactics to achieve Lower Total Cost of Ownership
Work effectively with internal stakeholders cross-functionally and cross-regionally, as well as those of external partnerships who are critical in meeting Key business objective
Responsible for Supplier performance and Conduct periodic Business review, driving Supplier on improvement plan to close Performance gaps. Conduct supply risk assessments, establish and drive mitigation plans accordingly
|
Senior Specialist, Indirect Sourcing
|
Singapore |
Operations & Manufacturing |
2019-11-28 |
Mentor and oversee a small group of application engineers on their day-to-day work and professional development;
Technical interface to Marketing, Product Management, FAE, FSE and customers (Level-3 and design-in support);
Daily interaction with AE and FAE. Assignment of work packages and setting of priorities on Level-3 support(customers, design-in projects) based on ams GC Strategy;
Participate in reference designs from Hardware/Optical design management perspectives. Responsible for optical architecture and design decisions and potentially extending to overall hardware system architecture;
Optical Lab management. Responsible to optical system simulations and outputs;
Performance analysis of ams and competitive products, including tear-downs and comparative analysis
Technical documentations drafting incl. specification of reference, application notes, articles, presentations and training materials for both internal staff and external customers;
Project planning on reference designs and Level-3 customer project design-in supports, with full alignment with GC application team, regional sales/marketing teams, business line stakeholders;
Project management incl. project status review, identify key issues of the project and initiate risks;
Manage external partners/vendors/suppliers on reference designs and joint developments;
Travel up to 30%
|
Application Engineering Manager, Optical Sensing
|
China |
Sales |
2019-11-28 |
Work within a worldwide multidisciplinary development team to provide optical design solution to customer specifications
Define design concepts and select key optical technologies in-line with requirements
Optical modeling, and optical system performance simulation and verification
Generate product documentation including optical design specifications, and optical design performances reports
Perform engineering product verification to ensure compliance to requirements
Cooperate with Project Leaders to assure design to be compliant with mechanical and manufacturing ground-rules
Work well with diverse geographical team
|
Senior Optical Engineer
|
Switzerland |
Research & Development |
2019-11-27 |
Master thesis, Low Power Digital Design Flow using IEEE-1801 UPF
Low power design and verification are increasingly necessary in today's IC design.
The IEEE 1801 standard, Unified Power Format (UPF), is an industry wide power format specification
to enable low power design and verification from RTL through physical design implementation.
This master thesis will evaluate UPF-based low power design, verification, and implementation
based on 40nm CMOS technology using EDA (Electronic Design Automation) tools available at ams AG.
Evaluate Digital Design Tools and acquire skills in UPF Methodology. Review 40nm CMOS technology for power optimization capabilities. Combine these disciplines to a low power design flow.
|
Master Thesis Student for Digital Design UPF (m/f/d)
|
Austria |
Research & Development |
2019-11-27 |
Lead the lens & camera assembly design and collaborate with potential suppliers and manufacturers to meet overall quality and cost specifications
Lead efforts to optimize image quality and correct optical aberrations in the lens assembly
Responsible to define yield target for new product and develop roadmap for continuous yield improvement
Interface with multiple stakeholders from Design, New Product Development, Test, Packaging, Reliability, Operations and Quality Engineering teams to support new product development, product qualification and ramp up activities, ensuring product meeting committed timeline and achieve best in class yield and quality
Compile and analyze data using common statistical and effectively present key results & conclusion along with recommended actions
Analyze products to ensure manufacturability and data sheet compliance, this includes supporting design challenge, OEMD, DFM review etc, continuously feedback to development team
Lead cross functional team to solve yield issue, manage excursions and questionable material disposition
Assume process ownership after product release and acts as a central interface for all product issues
Engage in group problem-solving and process improvement projects
Employ appropriate Statistical Process Control (SPC) principles to reduce variability in product performance
Interface with development team to drive effective FMEA’s and risk reduction assessment
|
Senior Staff Engineer, Lens and Camera Assembly
|
Korea |
Operations & Manufacturing |
2019-10-31 |
Responsible to define yield target for new product and develop roadmap for continuos yield improvement.
Interface with multiple stakeholders from Design, New Product Development, Test, Packaging, Reliability, Operations and Quality Engineering teams to support new product development, product qualification and ramp up activities, ensuring product meeting commited timeline and achive best in class yield and quality.
Compile and analyze data using common statistical anlysis methodology and effectively present key results & conclusion along with recommended actions.
Analyze products to ensure manufacturability and data sheet compliance, this includes supporting design challenge, OEMD, DFM review etc, continuously feedback to development team.
Lead cross functional team to solve yield issue, manage excursions and questionable material disposition.
Assume product ownership after product release and acts as a central interface for all product issues
Engage in group problem-solving and process improvement projects.
Employ appropriate Statistical Process Control (SPC) principles to reduce variability in product performance.
Interface with development team to drive effective FMEA’s and risk reduction assessment
|
Senior Staff Product Engineer
|
Korea |
Operations & Manufacturing |
2019-10-31 |
Work with OSAT suppliers in the multi-chip module assembly and its processes like wire bonding, flip chip and SMT
Work with OSAT suppliers to ensure the packaging assembly materials and its equipment are able to meet the ramp and production output
People leadership whereby you will lead and influence cross functional stakeholders (product development, engineering, quality assurance, supply chain management and suppliers) to ensure seamless transition from development to manufacturing
Supplier management skills, capable in driving supplier to ensure products are manufactured based on ams requirements and delivered up to customer satisfaction
Manage issues and risk through proper risk identification and work closely with the team to drive closure of the risk items prior to ramp
Expert in managing information flows to ensure the right information is available and provided to the right person to make the right decision aligning to business line strategy
Management reporting and capable in develop and measure key performance indicators, responsible in weekly/ daily project progress updates to management
Maintain and follow through the product life cycle management including implementation of new product transfer methods, processes and checklist
Support and work with development team to do OEMD/ DFM review and perform package design challenge for manufacturability
|
Senior Staff Engineer, System Assembly
|
Korea |
Operations & Manufacturing |
2019-10-31 |
1) Perform on-going preventive maintenance and repair work on facility ACMV systems
2) Cost saving initiative overheads and utility reduction
3) Facility management review and operations
4) Maintain, operate all HVAC systems and associated equipment, plumbing systems, building management system and building repairs
5) Perform facility inspections and report on condition affecting operations
6) Monitor and supervise HVAC preventive Maintenance contracts and respond to emergencies
7) Liaise with vendors on scheduled and unscheduled work, carry out performance evaluations on vendors
8) Prepare and submit summary reports of conditions in buildings and recommend actions to be taken
9) Review and understand equipment and methods of operation, BMS system, fire/life-safety, and other systems
10) Comply with all safety procedures and requirements
|
Staff Engineer
|
Singapore |
Operations & Manufacturing |
2019-11-21 |
Document the current status for chip/package/board Co-design at ams
Investigate and document the different cross domain effects
Literature and internet recherché on state of the art methods and software for Chip/Package/Board co-design
Evaluate the Cadence Virtuoso RF Solution flow
Implement the flow at ams and benchmark against other available tools
Prove the concept on a real life example like an illuminator (Board with VSCEL, Driver and Logic)
Make suggestions for future developments in this area
Setup a training for the new flow
Give a presentation at the Cadence User Group Conference
|
Master Thesis Student for Chip and package co-simulation (m/f/d)
|
Austria |
Research & Development |
2019-11-20 |
Close the gap between IT and Business
Primary contact for new requirements or project requests
Focus Area – Procurement and Purchasing
Close the gap between IT and Business
Primary contact for new requirements or project requests
Focus Area – Procurement and Purchasing
|
IT Business Partner Global Procurement
|
Singapore |
IT |
2019-09-11 |
You will be part of the design team working under the guidance of a technical leader on the development of our future image sensors. You are responsible for the design, layout and verification of your designed blocks.
Design and verify the analog block(s) according to specifications
Layout and layout verification of design block(s)
Post Layout verifications
Support the characterization and debug of your designed blocks in the lab
Prepare and report technical progress to project manager and technical lead
|
Analog Design Engineer
|
Belgium |
Research & Development |
2019-11-20 |
1. Responsible warehouse and logistics operation and to support daily in/ out activities.
2. Responsible or assist in the loading and unloading of goods while maintaining neat and systematic storage of products.
3. Responsible and perform an array of functions that may include receiving and processing incoming stock and materials put away.
4. Materials picking with FIFO and expire date control procedure and filling orders from stock to manufacturing including ERP transactions.
5. Materials packing and shipping orders to meet customers order fulfilment.
6. Not limited to handling of RMA, materials master data update and simple reporting.
7. Assist Supervisor/ Manager in meeting all aspects of operational requirements with the available operational resources.
8. To ensure safety requirements are met and practiced while on the job
9. Follow and adhere to instruction from the Supervisor/ Manager.
10. Ensure and maintain all aspects of personnel and operational discipline, housekeeping and Workplace Safety and Health requirement.
11. Assist Supervisor on daily stock count and yearly inventory stock take management
|
Skilled Officer, Logistics
|
Singapore |
speculative application |
2019-11-20 |
• Be part of the Finance SSC Singapore Asia Team
• Responsible for day to day management of SSC Accounts Receivable (AR)
• Ensure all invoices and credit notes are accurately recorded in the ERP system
• Perform reconciliation between AR sub ledger and AR GL
• Monitor and follow up on AR collections
• Prepare AR aging report and generate customer statement of accounts
• Perform closing and reconciliation processes and prepare audit schedules related to AR
• Generate intercompany transactions
• Support other finance operations in areas of Accounts Payables, Treasury and GL
• Perform accounting functions for overseas subsidiaries
• Other ad hoc duties as and when required
|
Finance Associate
|
Singapore |
Finance & Controlling |
2019-11-20 |
Close cooperation with the product development in order to ensure testability of the IC-products in a very early design stage
To test IC’s on Wafer Level
For Final Package device Level testing
Hardware development to adapt existing test platforms to the test requirements of the products
Design of test interface circuitry (Loadboard)
Probecard design for wafer level testing
Development of test software for Automatic Test Equipment (ATE) based on UNIX using structural and high level programming languages
Project and lessons learnt documentation
Industrialization of the test solution and transfer to production with clear defined stability and repeatability criteria’s
Ramp up support, Yield optimization, Test time reduction, Continuous improvement
Close cooperation with test support, product engineering, production and quality
Take over and Maintenance of already
|
Test Development Engineer
|
India |
Research & Development |
2019-11-19 |
Technical support interface for Marketing, Product Management, FAE, FSE and customers (2nd level and design-in support)
Development of software and firmware for embedded systems, including Android platforms
Embedded driver development in various sensor hub frameworks and mobile SOC platforms
Responsible for software architecture and design decisions for overall software system design and architecture
Development of reference systems and demos
Measurements setup and methods based on custom automation systems
Drafting of customer facing documentation, such as application notes, articles, and presentations
Development and presentation of training materials for both internal staff and external customers
Specification of reference applications for target markets including system architectures, circuits, and components
Performance analysis of ams and competitive products, including tear-downs and comparative analysis
Support Marketing and Engineering in new device definition and work statement preparation
|
Senior Staff Engineer, Application Engineering
|
China |
Marketing & Strategy |
2019-11-19 |
development of new technology for optical filters
integration of optical filters in sensing systems
cooperation with tool supplier
supporting customer relationship
|
Engineer (Filter R&D)
|
Singapore |
Research & Development |
2019-09-12 |
Execute the tape out for external Wafer Fabs
Interfacing with external FABs using the online portals/telecons/email
Define Maskmaking
Define engineering wafer-lots
Transmit GDSII Data to the Waferfabs
Execute the release for maskmaking and engineering-waferlots
Check/release/complete customer specific documents in the AMS Document system
Use the AMS SRH ordering-System
|
Staff Engineer FSO Tapout (m/f/d)
|
Austria |
Operations & Manufacturing |
2019-11-18 |
Define device, technology design rules and target specifications.
Create process flows with process specifications.
Process module development and characterization
Define test structures for process integration and process module development.
Design statistical experiments and analyze results to optimize device architecture and/or process modules.
Coordinate process unit and process module development.
Drive process and device optimization.
Facilitate process improvements and/or
|
Staff Engineer (Process)
|
Singapore |
Operations & Manufacturing |
2019-11-18 |
Select and develop new packaging technologies for novel sensor systems in medical and automotive applications
contribute to sensor system architecture definition as a technical expert for packaging
Coordinate package develoment and prototype builds at assembly partners worldwide
Specify, build and analyze engineering builds of new packages in terms of mechanical / functional / reliability performance
Interface with IC design, quality, assembly, product management and application teams & represent package development in multi-disciplinary / multi-site product development teams
Execute package development to successful completion within given resource constraints (time, budget)
Represent ams AG in the scientific community by contibuting to relevent conferences
|
Staff Engineer Package Development (m/f/d)
|
Austria |
Research & Development |
2019-11-12 |
Support the definition of architecture of the image sensor (digital part) and building block specifications.
Start to implement RTL code.
Support the creation and execution of verification plans/Testbench design (in co-operation with dedicated verification engineers).
Start to execute synthesis, P&R tasks or drive and follow-up on outsourced tasks.
Support the silicon validation and production test (DFT).
Start to build and coach the local digital team in the future.
Contribute to design methodology initiatives.
Start to prepare and report technical progress to project manager and customers.
|
Digital Designer
|
Portugal |
Research & Development |
2019-12-10 |
Software Design and Implementation for a broad spectrum of systems (firmware, drivers, mobile phone applications, PC GUIs, tooling scripts)
Software test specification, implementation, execution and automation
Creation and review of technical documents
Elicitation and management of software requirements together with domain experts
Implementation and improvement of quality focused software engineering workflows
|
Staff Engineer, Software Development (m/f/d)
|
Portugal |
Research & Development |
2019-11-25 |
Betreuung von Produktionsmaschinen (Programmieren, Einstellen, Bedienen, Beschicken, Umrüsten, Überwachen)
Warten und Instandhalten von Produktionsmaschinen, sowie systematische Fehlersuche und Reparaturarbeiten
Überwachen der Produktionsprozesse anhand regelmäßiger Produktprüfungen sowie Endtests
Einhalten der betrieblichen Richtlinien bezüglich arbeiten im Reinraum
Ausführen der Arbeiten unter Berücksichtigung der einschlägigen Qualitäts-, Sicherheits- und Umweltstandards
|
Lehrling ElektronikerIn - Mikrotechnik
|
Austria |
Operations & Manufacturing |
2019-11-11 |
Organisation und Koordination von Meetings
Allgemeiner Schriftverkehr
Bestände wie Büromaterialien führen und beschaffen
Arbeiten im Rahmen des Zahlungsverkehrs durchführen
Administrative Tätigkeiten und Unterstützung
der Personalabteilung
Unterstützung des Shared Service Centers
Arbeiten im Postein- und -ausgang erledigen
|
Lehrling Bürokauffrau/-mann
|
Austria |
Human Resources |
2019-11-08 |
Design, implement, test and document solutions for our internal customers (interfaces, technical concepts for solutions, enhancements to existing solutions).
Provide know how during analysis of requirements (i.e., give proposals for solutions).
Analysis of problems/failures during the whole software life-cycle together with our key users.
Help develop and move forward the services of the software development team.
Work in teams and in a self-reliant manner, interacting with internal customers.
Create new interfaces or adapt existing ones to third-party systems.
|
Senior IT Engineer, Software Developer (m/f/d)
|
Austria |
IT |
2019-11-06 |
Leads projects that develop application/reference designs/demo kits either in-house or with partners
Works closely with HW and SW teams
Drives the verification of functionality and KPIs
Develops the Application Engineering team to match the needs of the business in terms of competences and bandwidth
Interacts in specification of new components/modules to fit optimally to their targeted system application
|
Senior Staff Engineer, Process
|
United States |
Research & Development |
2019-05-09 |
Supervise and manage all aspects of purchasing for subcontracted services
Manage in cross-functional teams with the interfacing technical and quality departments:
Clarification of the exact technical requirements with the operations and engineering personnel, vendor selection criteria, methodology of selection (best value, lowest price, etc.), cost negotiations, contract negotiations
Oversee and manage the RFQ (request for quote) process for products and services, review the specification together with the interfacing engineering department and analyze the requirements and decide on the fitting supplier or subcontractor and on the type of contract needed in this case
Perform cost or price analysis, including review of cost breakdowns to determine reasonableness of price and develop negotiation strategy
Maintain and update the procurement processes & filing systems for full compliance with all company policies and contract requirements
For all ams key suppliers: develop, implement, and maintain contracts, including modification-tracking and contract-alerts for critical items, in tight cooperation with our legal department
Ensuring compliance of all company regulations and policies
Review and sign purchasing actions
Maintaining complete confidentiality of all purchasing and contract related matters
Develop, implement, and maintain all key tracking metrics for departmental performance (time to procure, work volume, on time delivery, buyer volume, error logs, etc.)
Act as point of contact with subcontractors and vendors for claims and critical change orders. Work with Engineering and QC Representatives to resolve contract deficiencies
Support our interfacing SCM department by supporting them with resolving issues related to the timely, accurate, and complete supply of products and services
Complete and submit a monthly report detailing assigned work, upcoming work, and ongoing projects to your management
Negotiate contract modifications to improve the supplier performance
|
Senior Procurement Specialist, Assembly Subcontracting
|
Malaysia |
Global Strategic Purchasing |
2019-10-14 |
1. Responsible warehouse and logistics operation and to support daily in/ out activities.
2. Responsible or assist in the loading and unloading of goods while maintaining neat and systematic storage of products.
3. Responsible and perform an array of functions that may include receiving and processing incoming stock and materials put away.
4. Materials picking with FIFO and expire date control procedure and filling orders from stock to manufacturing including ERP transactions.
5. Materials packing and shipping orders to meet customers order fulfilment.
6. Not limited to handling of RMA, materials master data update and simple reporting.
7. Assist Supervisor/ Manager in meeting all aspects of operational requirements with the available operational resources.
8. To ensure safety requirements are met and practiced while on the job
9. Follow and adhere to instruction from the Supervisor/ Manager.
10. Ensure and maintain all aspects of personnel and operational discipline, housekeeping and Workplace Safety and Health requirement.
11. Assist Supervisor on daily stock count and yearly inventory stock take management
|
Skilled Officer, Logistics
|
Singapore |
speculative application |
2019-11-05 |
Set up the Compliance Management System in Singapore and Asia
Act as the main contact with all compliance related issues, and should also work closely with HR
Responsible for trainings, mind setting and establishing a Compliance Culture into the oranisation
Provide compliance advisory to local business lines
|
Compliance Officer
|
Singapore |
Central Functions |
2019-11-04 |
Provide EDA tool support to local and remote designers doing analog design
Improve and update the Safe Operating Area check and the lifetime checks used in analog design
Work together with the quality and modeling groups to improve the reliability flow
Collaborate with global design support team overseas to support a standard flow within the company
Work with EDA vendors (Cadence, Synopsys, Mentor) to report issues and find solutions to complex problems
Create or modify scripts (Unix shell, Tcl, Perl, Phyton) as necessary to automate common design tasks
Develop and deliver regular trainings to update designers with the new tool features
Contribute to internal knowledgebase articles and create app notes as necessary
Communicate with engineers and managers about tool issues, workarounds and fixes
Be able to multitask and juggle priorities as needed
|
Engineer, Analog Design Support
|
India |
Research & Development |
2019-10-31 |
Block/Chip physical design floor-planning, power-planning, implementation and integration in CMOS process
Design functional equivalence, timing/performance, signal integrity checks and IR analysis.
Physical Verification for DRC/LVS, reliability and power checks
Leading and mentoring junior employees and contractors in the team
Technical communication with customer (and/or marketing) and other work-packages, including: presentation in design reviews, test requirements, defining / tracking / working to ensure schedule adherence, interactive problem solving and customer communication under pressure.
Experience with EM/IR: Voltus or Apache RedHawk is preferred
Create and patent new IPs
High level of proficiency in design flow, synchronization, STA, design-for-test (DfT), place and route (PnR), ATPG
Internal team leadership and communication, coordination of design requirements and tradeoffs, preparation for weekly meetings (internal and customer)
Interact with FE team to understand timing and CTS requirements and achieve best quality results
|
Senior Staff Engineer, Physical Design
|
India |
Research & Development |
2019-10-30 |
Close cooperation with the product development in order to ensure testability of the IC-products in a very early design stage
Project planning, quotes for target test times and development costs and efforts
Development of test concepts in cooperation with Design, Customer and Suppliers
To test IC’s on Wafer Level and Package Level
Hardware development to adapt existing test platforms to the test requirements of the products
Design of test interface circuitry (loadboard) and probecard for wafer level testing
Development of test software for Automatic Test Equipment (ATE) using structural and high level programming languages
Project Documentation
Industrialisation of the test solution and transfer to production with clear defined stability and repeatability criteria’s
Ramp up support, Yield optimisation, Test time reduction, Continuous improvement
Close cooperation with test support, product engineering, production and quality
Take over and Maintenance of already implemented test solutions
Contribution to new test methods and test development know-how
Continuous contribution to workflow and process improvement
Available for transfer of test program in far East production sites
Knowledge about optical testing is a plus.
|
Principal Engineer, TDEV
|
Italy |
Research & Development |
2019-05-22 |
Development of new semiconductor devices, with focus on integrated optics and optical sensors
Optical and electrical characterization of devices
Continuous improvement of accuracy and precision of optical characterization methods
Simulations at process-, device and system-level
Cooperative Research with academic and industrial partners in joint R&D projects
Wafer-level measurements of Si and III-V optical sensors.
|
Device Engineer (Opto)
|
Singapore |
Research & Development |
2019-10-28 |
Technical support interface for Marketing, Product Management, FAE, FSE and customers (2nd level and design-in support)
Development of software and firmware for embedded systems, including Android platforms
Embedded driver development in various sensor hub frameworks and mobile SOC platforms
Responsible for software architecture and design decisions for overall software system design and architecture
Development of reference systems and demos
Measurements setup and methods based on custom automation systems
Drafting of customer facing documentation, such as application notes, articles, and presentations
Development and presentation of training materials for both internal staff and external customers
Specification of reference applications for target markets including system architectures, circuits, and components
Performance analysis of ams and competitive products, including tear-downs and comparative analysis
Support Marketing and Engineering in new device definition and work statement preparation
|
Sr. Staff Engineer, Application Engineering
|
China |
Sales |
2019-10-27 |
Establish project plans with TL (Technical Lead), check for logistic constraints, resource, lead-time, etc.
Drive project execution according to Engineering process
Track and report projects according to project management standards (e.g. IPMA and/or PMI)
Trigger and follow-up all actions which arise from project status meetings
coordinat activities between the different teams (e.g. design, application, product management, operations, assembly, quality and marketing)
Complete and support project risk assessments. Escalate issues to project steering board and project owner to ensure successful project execution.
Define resource requirements, gaps and contingency plans
Responsible for all aspects of the projects to ensure success - identifying critical path, critical risks
Understand barriers, challenges, and trade-offs in all functional areas (chip design, test development, application, SW, firmware, Product & Test Engineering, quality, sourcing, customer engineering, marketing, etc.) in order to maintain a coherent plan for delivering to schedule, product cost and revenue
Troubleshoot project issues at both a managerial and technical level and helps to develop alternative project tasks, schedules, milestones, resource plans, processes etc. to resolve project issues and conflicts.
Lead problem resolution, identifying required resource, tasks and investigation path to quickly solve issues to maintain schedule through and product productions and market launch.
|
Senior Project Manager (m/f/d)
|
Austria |
Research & Development |
2019-10-25 |
Responsible for the lab characterization setup and related activities
Implement the automated test equipment/automated processing test data/automated image analysis
Knowledge and experience in imaging and cameras, lasers, optical sensors
Experience in Hardware/software interfacing such as (I2C, SPI, CSI, RS232, USB) and good understanding of electronic circutis and schematics
Knowledge in Electro-Optical characterization
Knowledge in data processing and statistical analysis tools like JMP, R, Matlab is a plus
|
Staff Engineer, Optical
|
Singapore |
Operations & Manufacturing |
2019-10-25 |
Project leader and project team member for test related projects e.g. installation of new test equipment / new test facilities, equipment improvements for VCSEL as well as for Silicon semiconductor production.
Evaluate and implement new test hardware and test processes in ams environment as well as at external production sites (OSAT).
Develop a strong functional relationship with key supplier’s technical team to come out with breakthrough engineering solutions
Improve and monitor test production line performance
Contact person for equipment related test issues
Key contact to equipment vendor
Start up and improve required test (optical and electrical) equipment related tasks for ams AG’s internal and external production facilities to guarantee zero defect on-time deliveries
Need to manage multiple concurrent projects and ensure timely support and execution of assigned tasks and action items
|
Engineer (Test Process)
|
Singapore |
Operations & Manufacturing |
2019-10-24 |
development of new technology for optical filters
integration of optical filters in sensing systems
development of new approaches for lithography related to optical filters
optical and mechanical characterization of IF filters and layer materials
qualification of new optical filter technologies and integration approaches
|
Project Manager ( R&D)
|
Singapore |
Research & Development |
2019-09-12 |
On-chip software algorithm development for complex processing of analog and digital data without the use of a DSP
Responsible for development of software/firmware in embedded systems including interfaces for communicating with hardware
Responsible for software solution definition, architecture, and design decisions
Codes to standards and integrate with existing solutions
Specification and development of software modules for sensor systems
Integration of embedded components (drivers, com. protocols, etc.)
Define design and development tasks including accurate time estimates
Source for customer facing technical documentation content
Reference application development
Chip driver development for different platforms
New product proposals, technical marketing support
Technical support at product launches
Up to 15% domestic or international travel
|
Sr. Staff Engineer, Software Algorithm
|
United States |
Research & Development |
2019-10-22 |
Responsible for development of software to enable the local applications lab
Responsible for conveying software architecture and design requirements into the local digital and analog design teams
Codes to standards and integrates within existing processes
Responsible for a high level of documentation across all aspects of this position
Acts as a local software liaison for the business line
Champions software across the local teams
Up to 5% domestic or international travel
|
Software Engineer
|
India |
Research & Development |
2019-10-22 |
Coordination with project teams during all product phases (e.g. design through MP)
Close working with factory Industrial Engineering teams to ensure successful product launch to mass production.
Coordinates Division short and long term manufacturing strategies to ensure products are integrated into the factories as required.
Directs functional departments for the adoption of new and exisiting manufacturing capabilities
Ensures that capital equipment requests are successfully submitted and approved through the ams Capex process.
Coordinates with the IE teams to ensure reuse of existing resources/equipment to ensure high asset utilization
Drives finance and accounting process to ensure utilization charges to the Division are substantiated and accurate.
|
Project Manager (A)
|
Singapore |
Operations & Manufacturing |
2019-10-21 |
Assessment of Foundry PDKs (Model qualification, Qualification and improvement of Foundry DFx Models (Variability, Reliability) )
Realization of Design Documents for CMOS technologies
Compact Modeling and analog simulator support
SPICE and statistical modelling (matching) of active and passive devices for CMOS sensor processes for analog/mixed signal
Measurement and characterization of integrated sensors (optical, magnetic, gas) in CMOS technology
SPICE modelling of VCSEL and PD Devices for automotive products
|
Senior Staff Engineer, Compact Modeling
|
India |
Research & Development |
2019-10-21 |
Able to lead Task Force, solving RMAs/customer issues – initiates and drives implementation of containment /corrective action
Quality Engineering Responsibility throughout Product Lifecycle (Development to End Of Life)
Customer & Supplier Quality Engineering
Reliability assessment of suspect material
Conducting Internal and External Audits
Contact for executives, employees, suppliers and customers in quality related topics
|
Sr. Staff Customer Quality Engineer
|
Philippines |
Quality |
2019-10-11 |
Leading small to mid-size software projects in R&D. Identification and obtaining project objectives. Working with development teams on effort estimates, work package breakdown, project scheduling and progress tracking.
Driving risk assessment and risk mitigation.
Budgeting, resource allocation, cost control and reporting of project status.
Improve workflows of software development teams.
Drive transfer to agile software development.
|
Project Manager, Software (m/f/d)
|
Austria |
Research & Development |
2019-10-11 |
Lead and supervise a team of QA assistants to carry out the day to day QC operation.
Early involvement in NPI products. Evaluate materials and identify key issues relating to product, process & quality system.
Conduct periodic MSA and correlation study on IQC equipments.
|
Sr Staff Engineer, PQE
|
United States |
Quality |
2019-10-11 |
Work within a worldwide multidisciplinary development team to provide optical design solution to customer specifications
Define design concepts and select key optical technologies in-line with requirements
Optical modeling, and optical system performance simulation and verification
Generate product documentation including optical design specifications, and optical design performances reports
Perform engineering product verification to ensure compliance to requirements
Cooperate with Project Leaders to assure design to be compliant with mechanical and manufacturing ground-rules
Work well with diverse geographical team
|
Senior Optical Engineer
|
Switzerland |
Research & Development |
2019-10-09 |
Work within a worldwide multidisciplinary development team to provide optical design solution to customer specifications
Define design concepts and select key optical technologies in-line with requirements
Optical modeling, and optical system performance simulation and verification
Generate product documentation including optical design specifications, and optical design performances reports
Perform engineering product verification to ensure compliance to requirements
Cooperate with Project Leaders to assure design to be compliant with mechanical and manufacturing ground-rules
Work well with diverse geographical team
|
Senior Optical Engineer
|
Switzerland |
Research & Development |
2019-10-09 |
Definition of system and IC requirements together with internal and external customers
Generation of engineering quotes including feasibility, requirement analysis, risk analysis and execution plan
Development of integrated circuits from initial concept through prototype approval and production ramp up, with focus in low noise front ends for medical imaging market
Technical leader ship of IC related product development
Interdisciplinary coordination and corporation with internal departments especially during product development
Creation and patenting of new IP
|
Senior Analog Design Engineer
|
Switzerland |
Research & Development |
2019-10-09 |
Work closely with ams Sales team directly supporting customers in the technical promotion (presentation/demonstration) of ams sensor products.
Technical focus would be on applications involving entire portfolio of products within large strategic accounts
Support selected Distribution and Sales Rep partners to provide technical training and customer applications support.
Be able to provide effective problem solving and troubleshooting skills in the field.
Identify applications, create application block diagrams and provide feedback to the ams business lines regarding target markets including system architectures, circuits and components.
Work closely with sales team on new account development and expand the ams product base at existing accounts.
Collaborate with business units, sales teams, distributors and customers. The role includes proactive support of customer design engineers and help sales drive design wins.
|
Field Applications Engineer
|
United States |
Sales |
2019-10-07 |
Identify and realize opportunities with existing and subsidiary customers
Develop strategy needed to win the account
Build multi-level customer relationships to support account strategy at each site and coordinate the use of internal resources, including local field application engineers, sales management and business unit staff to drive design wins.
Provide value-added feedback on customer needs to management, business units and customer service teams
Lead pricing and contract negotiations to secure the business
Provide accurate demand forecast and manage customer backlog to ensure orders are booked with adequate lead time
Ensure customers adhere to agreed contractual terms over time
Manage major client to meet customer order and achieve sales targets.
Looking for a true "hunter" to drive new business
|
Senior Account Manager
|
United States |
Sales |
2019-05-24 |
We are looking for an Embedded Software Engineer with expertise in firmware and platform driver development. You have hands-on experience with testing and validation (e.g. unit tests) and continuous integration workflows. As part of the development team, you will use your expertise to bring up new sensors and composite solutions and integrate them on a number of hardware platforms.
Participate in the development of software for 3D solutions : a) Firmware for microcontrollers and custom ASICs / FPGAs, b) Platform drivers - including PC and mobile - and relevant host tools, c) Demonstration systems on PC and mobile
Assist with testing and validation: unit tests/static analysis/(sub)system tests, continuous integration workflows
Assist with specifying Requirements including measurable performance
|
Embedded SW Engineer
|
Switzerland |
Research & Development |
2019-10-04 |
Manage incoming materials and conducts suppliers audits
Drives quality control related projects regarding new processes, new products and continuous improvements
Process support for automated optical inspection
Creates and updates quality specifications
Drives the implementation of corrective actions in case of external or internal complaints
Solves quality or process problems and drives continuous improvements
Optimizes defined quality gates and optimize their efficiency
Generation and analysis of quality data
|
Staff Engineer, IQC and suppliers management (VCSEL)
|
Singapore |
Quality |
2019-10-04 |
Drives quality control related projects regarding new processes, new products and continuous improvements
Acts as quality deputy in MRB, PCRB, production projects e.g. ramping up line
Process support for automated optical inspection
Creates and updates quality specifications
Drives the implementation of corrective actions in case of external or internal complaints
Solves quality or process problems and drives continuous improvements
Optimizes defined quality gates and optimize their efficiency
Generation and analysis of quality data
Supports customer and system audits
Lead in SPC management and implement controls for early detections and abnormal variations
|
Sr Staff Engineer, IPQC SPC expert (VCSEL)
|
Singapore |
Quality |
2019-10-04 |
Review test requirements for c-sample, Unlimited Production and qualification sample (DVT/EVT)
Quality gate for MRB release of lots violating SYL/SBL
DOE testing and electrical drift analysis support for Process Quality
Drives quality control related projects regarding new processes, new products and continuous improvements.
Able to lead Task Force, solving RMAs/customer issues – initiates and drives implementation of containment /corrective action
Conducting Internal and External Audits
Acts as quality deputy in production projects e.g. ramping up line
Drives the implementation of corrective actions in case of external or internal complaints
Generation and analysis of quality data
Development and implementation of quality control strategies
Creates and updates quality specifications
Supports customer and system audits
|
Sr Staff Engineer, Test Quality (VCSEL)
|
Singapore |
Quality |
2019-10-04 |
Review test requirements for c-sample, Unlimited Production and qualification sample (DVT/EVT)
Quality gate for MRB release of lots violating SYL/SBL
DOE testing and electrical drift analysis support for Process Quality
Drives quality control related projects regarding new processes, new products and continuous improvements.
Able to lead Task Force, solving RMAs/customer issues – initiates and drives implementation of containment /corrective action
Conducting Internal and External Audits
Acts as quality deputy in production projects e.g. ramping up line
Drives the implementation of corrective actions in case of external or internal complaints
Generation and analysis of quality data
Development and implementation of quality control strategies
Creates and updates quality specifications
Supports customer and system audits
|
Sr Staff Engineer, Test Quality (VCSEL)
|
Singapore |
Quality |
2019-10-04 |
Drives quality control related projects regarding new processes, new products and continuous improvements
Acts as quality deputy in MRB, PCRB, production projects e.g. ramping up line
Process support for automated optical inspection
Creates and updates quality specifications
Drives the implementation of corrective actions in case of external or internal complaints
Solves quality or process problems and drives continuous improvements
Optimizes defined quality gates and optimize their efficiency
Generation and analysis of quality data
Supports customer and system audits
|
Sr Staff Engineer, Quality, MRB (VCSEL)
|
Singapore |
Quality |
2019-10-04 |
Perform daily task of assigned station such as PM and workplace safety
Report and compilation of daily maintenance and other activities of assigned station, as well as wrtie troubleshooting reporting pertaining to a machine down time .
Provide improvements ideas and work within the group to further improve the equipment performance
Demonstrate technical knowledge while performing the troubleshooting of machine
|
Technician, Equipment and Maintenance
|
Singapore |
Operations & Manufacturing |
2019-10-04 |
Close cooperation with the product development to ensure testability of the IC-products in a very early design stage
Project planning, quotes for target test times and development costs and efforts
Development of test concepts in cooperation with Design, Customer and Suppliers
To test IC's on wafer and package level
Hardware development to adapt existing tester platforms to the test requirements of the products
Design of test interface circuitry (loadboard) & probecard design for wafer level testing
Development of test software for Automatic Test Equipment using structural and high level programming languages
Industrialization of the test solution and transfer to production with clear defined stability and repeatability criteria's
Ramp up support, yield optimisation, test time reduction, continuous improvement
Close cooperation with test support, product engineering, production and quality
Take over and maintenance of already implemented test solutions
Contribution to new test methods and test development know-how
|
Test Development Senior Staff Engineer (m/f)
|
Switzerland |
Research & Development |
2019-09-25 |
Is this the next step in your career?
Be part of our technical application and design-in team and provide support for consumer image sensors to our global customer base.
Your responsibilities include conducting:
Evaluation and verification of image sensor circuits, design of reference applications.
Evaluation board and GUI specification, subcontractors interaction.
Application and design-in support at customers on system and device level.
Lab setups / automation and MCU programming.
Being part of the technical support at product launches.
datasheet and application note generation
PCB design and evaluation based on Altium Designer
Support Marketing/Product Management and Engineering in work statement preparation
New product proposals
|
Staff Engineer, Application Image Sensors
|
Belgium |
Marketing & Strategy |
2020-01-14 |
Manage a team of Production Assistants/Operators to oversee the day to day production operations.
Fulfill the pack out quantity against loading plan. Ensure yield and quality targets are met together with Engineering & Quality department.
Management of production resources to make sure all are trained, follow work instructions and maintain a high level of motivation and discipline within the production.
|
Team Lead
|
Singapore |
Operations & Manufacturing |
2019-09-04 |
Responsible for the industrial producibility of ams Automotive products manufactured in the ams Optical Elements Line
Act as interface between the Business Line and the ams Singapore factories for the relevant portfolio
Support new product introduction, safe-launch and mass production through data analysis
Initiate cost reduction and quality improvement actions, drive yield improvements and hold lot dispositioning
Drive/participate in 8D teams in case of yield issues, customer complaints, or production problems
Support Technology, Test and Product release
Support production (line) transfers to other facilities or new processes
|
Staff Engineer, Product (Automotive)
|
Singapore |
Operations & Manufacturing |
2019-09-16 |
Technology development for advanced 3D integration concepts in close cooperation with Fab Engineering and external partners
Technical support in funding projects
Characterization of the technology by test, analysis and work out in conclusive reports
Submitting new innovative process and device concepts as patent proposals
Working in team-oriented atmosphere with a strong focus on thorough documentation and completing of projects timely and successfully
Setting expectations by detailed work plans. Identifying gaps, issues and needs to resolve and to successfully complete the tasks
Reports efficient and effectively to stakeholders to maintain commitments
|
Engineer, Process R&D TSV (m/f/d)
|
Austria |
Research & Development |
2019-09-03 |
Technology development for CMOS integrated MEMS sensors in close cooperation with Fab Engineering and external partners
Characterization of the technology by test and analysis and working out conclusive reports
Applying problem solving methods (like 8D, Fishbone, etc.) and risk analysis (like FMEA)
Tracking the completion of the project related tasks in accordance with the project plan
Working in team-oriented atmosphere with a strong focus on thorough documentation and completing projects timely and successfully
Setting expectations by updated and detailed work plans. Identifying gaps, issues and needs to resolve and to successfully complete the project
Efficient and effective reporting to stakeholders to maintain commitments
Submitting new innovative process and device concepts as patent proposals
|
Senior Staff Engineer, Process R&D MEMS (m/f/d)
|
Austria |
Research & Development |
2019-09-03 |
• Arrest process abnormalities and drive for investigation and preventive solution
• Cross functional team member to support any manufacturing activities
• Drive for improvement activities that contribute to process control/ standardization, yield improvement or achieving better efficiency and cost saving
• Review defects criteria and conduct low yield defect analysis
• Manage and control the non-conformance materials
• Ensure SPC are well in control and drive for improvement
|
Staff engineer, Quality Engineering
|
Singapore |
Quality |
2019-09-03 |
Support the definition of detailed characterization and test plans
Develop electro-optical bench top tester for modules characterization with basic automation for data collection
Run characterizations and DOE operating on the lab setup.
Analyze measurement data collected by lab setup, including mass production test data and interact with IC/3D-System teams to support system debugging
Provide comprehensive documentation of device performance, characterization results, systems and methodologies
Support the development of novel characterization procedures and protocols for optoelectronic modules
Define mass-production tests and support operation teams during mass-production test bring up phase
|
3D Imaging Characterization Engineer
|
Switzerland |
Research & Development |
2019-08-30 |
Drives, manages and coordinates the ramp-up phase of product launches to ensure smooth ramp-ups of new products
Ensures product, process and supply chain readiness to meet customer schedule
Ensures production capacity and BOM is in place to support ramp-up phase (align with production, subcons, etc)
Responsible for production shipments to customer (WIP management, material tracking, interfacing to production, Waiver definition)
Crisis Management (critical supply situations, line-downs, etc.) incl. customer interaction
Close cooperation with production, engineering teams, quality, supply chain etc.
Ensures product release status fits to customer ramp-up plan (request and support for C-Sample release in time)
Identifies, addresses, solves or escalates issues that could jeopardize the customer ramp.
Interface to engineering/sales/customer for operations related topics
Challenges project teams at C-Sample release phase (yield, UPH, production readiness,..)
Customer questionnaires
|
Senior Staff Engineer, Industrialization - Project Manager Rampup (m/f/d)
|
Austria |
Operations & Manufacturing |
2019-08-27 |
Software Design and Implementation for a broad spectrum of systems (firmware, drivers, mobile phone applications, PC GUIs, tooling scripts)
Software test specification, implementation, execution and automation
Creation and review of technical documents
Elicitation and management of software requirements together with domain experts
Implementation and improvement of quality focused software engineering workflows
|
Staff Engineer, Software Development (m/f/d)
|
India |
Research & Development |
2019-11-25 |
Software Design and Implementation for a broad spectrum of systems (firmware, drivers, mobile phone applications, PC GUIs, tooling scripts)
Software test specification, implementation, execution and automation
Creation and review of technical documents
Elicitation and management of software requirements together with domain experts
Implementation and improvement of quality focused software engineering workflows
|
Staff Engineer, Software Development (m/f/d)
|
Austria |
Research & Development |
2019-11-25 |
Specify analog and mixed signal circuit concepts according to break down of product requirements
Design and verify analog and mixed signal circuitries
Support analog and mixed signal building blocks from definition to volume production
Work closely together with silicon validation, test engineering and quality management
Execute requirements engineering, configuration and change management and work compliance to automotive standards
|
Principal Engineer, Analog/Mixed-Signal Design (m/f/d)
|
Austria |
Research & Development |
2019-08-22 |
• Develop high-performance VCSEL/LED driver, and CMOS optical sensors receivers ICs from concept till transfer to mass production
• Design & verify high-performance analog/mixed-signal blocks & systems
• Define & track ATE requirements to meet Design for Manufacturing and process capability
• Generation of relevant documentation including: design reviews, internal design documents, test requirements, etc
• Create and patent new IPs, Supervise junior engineers
• Technically lead IC projects. In this role you are the main technical interface to the customer as well as internal stakeholders, for specification, design, layout, process, test and product engineering
|
Senior Analog IC Design Engineer
|
Switzerland |
Research & Development |
2019-08-12 |
• Design verification and validation of integrated circuits, using both directed tests and constrained random regressions
• Primary focus is digital design verification, proficiency with mixed signal design verification and creation / validation of models are strong advantages
• Proficiency in System Verilog and UVM, including: Writing checkers and assetions, customizing constraints, getting functional coverage collection using cover groups, etc.
• Technical and team leadership – both within the internal project DV team, but also directly supporting demanding customers.
• Creation of test benches and automated verification simulations
• Performing block level and top level design verification
• Generation of relevant documentation (DV Plan, DV execution plan, customer reviews, etc.)
• Create and patent new IPs
• Supervise junior engineers
|
Senior Digital Design Verification Engineer
|
Switzerland |
Research & Development |
2019-08-13 |
• Responsible for planning & executing mixed-signal IC verification for 3D Systems.
• Write, debug, and run test-benches to verify both models and transistor-level circuits for all operating modes using the AMS-Designer environment
• Implement mixed-signal behavioral models in System Verilog
• Develop test benches with high degree of automation
• Generate documentation for design verification planning & execution as well as customer reviews
• Collaborate with digital verification engineers to achieve overall verification coverage
• Support IC validation and production test (ATE) development
• Ensure adoption of DV best practices, procedures and improvements within organization
• Contribute to internal and external design & verification reviews
|
Senior Design Verification Engineer
|
Switzerland |
Research & Development |
2019-08-13 |
In the senior digital verification engineer role, you will take on an attractive and challenging job that allows you to grow into an internationally recognized image sensor verification expert. With the inherent mixed-signal nature of our image sensors you will work on a variety of blocks to model as well as excursions into the domains of analog and system design.
As senior verification engineer, you will:
Work with the design team and be responsible for translating product requirements into a verification plan, implementing UVM testbenches in various languages, including VHDL and SystemVerilog.
Be the first point of contact for others for simulation issues and for the design debugging.
Work alongside designers and team up with them to solve issues and dive into the designs to suggest fixes.
Propose and implement methodology improvements (automation, scripting).
Describe bugs found in a tracking system and verify their fixes.
Support the validation of the sensor in the lab.
Generate reports on code and feature coverage.
Prepare and report technical progress to technical project leader.
|
Senior Verification Engineer
|
Belgium |
Research & Development |
2019-08-27 |
As IT Business Partner, you close the gap between Business and IT, acting as primary contact person for new requirements or project requests
Your focus area will be Backend Production (Sort, Test, Assembly, ...)
Requirements engineering is one of your tasks, including analyzing, evaluating and clarifying new requirements and challenging their business value
You are independently responsible for managing projects from the initialization phase over planning resources, scope and time line to execution and roll-out of the project
Technical specifications for internal and external development projects are part of your work as well
You ensure that integration testing is done successfully and quality standards are met
As a team player, you try to develop a pragmatic and user-centered approach to find the best solution for all involved parties
Your active contribution to the development of the in-house IT project management capabilities (methodology, templates, best practices, lessons learned etc.) is highly welcome
Analysis of business processes, preparation of project decisions and the constant improvement of existing workflows are included in your activities
You support in defining, reviewing and maintaining the IT strategy and roadmap creation for system solutions
|
IT Senior Engineer, Business Partner for Backend Production (m/f/d)
|
Austria |
IT |
2019-08-07 |
Candidate will be stationed in Thailand.
Monitors the overall performance of ams suppliers in Thailand with regards to production and technology development (Analyzes production processes, identifies areas for improvement & sets up / reviews relevant process KPIs)Supplier on-site interface to ensure smooth production
Deal with maverick lots, low yield or in-line excursions, risk assessment and lot disposition
Attends major production & process quality related issues
Drives, manages and coordinates issues at suppliers and internal ams site
Works closely with ams various engineering departments and Product Reliability Team regarding qualification of new devices, technologies, packages and changes in the process flows
Performs process and quality audits following TS16949 and VDA 6.3 standards
Prepares and attends customer audits at supplier sites
Drives continuous improvement programs to establish predicable and reliable manufacturing capabilities at ams suppliers
Ensures that products and services are fit for purpose and meet both external & internal requirements and customer expectations
Actively involve early in product design stage to identify quality concerns or risks
|
Senior Staff Engineer, Supplier Quality
|
Thailand |
Quality |
2018-12-03 |
Corporate Support of DV tools and DV methodology
DV Tool management
DV Tool Evaluation and Implementation to the ams digital Design/DV flow
DV Tools Training and Mentoring
DV Project Support
|
Senior Staff Engineer, Digital Verification Support (m/f/d)
|
Austria |
Research & Development |
2019-08-01 |
• Create and optimize process recipe for die attach, lens attach process with datacon attach machine.
• Setup SPC, control plan and work instructions of the die attach and lens attach process for production.
• To work with suppliers and internal product/development process engineers on the qualification of the new process or equipment.
• Trouble-shooting on production issues related to process and manufacturing issues.
• Analyse data for process improvement.
|
Engineer, process (backend assembly)
|
Singapore |
Operations & Manufacturing |
2019-07-30 |
We are looking for an experienced C/C++ developer with expertise in algorithm optimization and smartphone hardware. You have hands-on experience with GPU and DSP programming with a good understanding of TEE development constraints. As part of the development team, you will work with our machine learning software engineers to transfer and port machine learning algorithms on mobile platforms.
Optimize and port C++ algorithms to mobile platforms
Design, implement and port algorithms to GPU and DSP
Port machine learning algorithms from research to production ready implementation
Profile production code for performance reporting
|
Senior Staff Engineer, C++ Software
|
Switzerland |
Research & Development |
2019-07-26 |
Process Management of ams product development process (today ENG-1)
Manage core team for sub processes
Align & contribute to other relevant processes
Work closely with Audit Manager
Maintain Sharepoint for Process Documentation
Project Management for successor product development process
Process management for sub process(es) depending on experience in relevant field
|
Sr. Project Manager, R&D Process (m/f/d)
|
Austria |
Research & Development |
2019-07-22 |
Dealing with world leading innovations on medical imaging technologies (CT, MRI and X-ray) as well as sensor interfaces
Developing software for customer evaluation and demonstrators
Software Development including design, implementation and test
Contribute to new and existing applications and libraries in C, C++, C#, and node.js
Opportunity to grow skills in an experienced team
Software peer reviews
|
Engineer, Software Applications (m/f/d)
|
Austria |
Marketing & Strategy |
2019-07-19 |
To provide engineering support in order to meet output, efficiency, productivity, safety, yield and cycle time requirements at minimum cost while maximizing product quality.
To be analytical and show high initiatives to drive line KPIs with teamwork horizontally and vertically
Trouble-shooting of defect and yield issues and process excursions associated with the new process/tools for WLO related issues
Ensure SPC are within control.
To coach, train and develop shift engineers and techs
|
Engineer,WLO Replication Process
|
Singapore |
Operations & Manufacturing |
2019-07-18 |
Leading a team of engineers and responsible for the daily operations including process improvements, quality management and overall performance of the value engineering section.
Drive continuous yield improvement and defect reduction projects.
Ability to resolve complex problems through systematic problem solving approach.
Drive process simplification and improve process robustness with good Cpk.
Conduct, review and improve process control plan/ FMEA / SPC
Interface and facilitate engineering engagements/ technical presentation/ audits with customers.
Provide mentorship to the process engineers.
|
Manager, Process Engineering FEOL
|
Singapore |
Operations & Manufacturing |
2019-07-17 |
Lead cross-functional product development team, coordinate project activities
Inspire, encourage the team members to high level of motivation and commitment
Drive open problem discussion, effective issue resolution
Recognize conflict, support/coach individuals, maintain team focus and meet targets together
Lead regular process reviews with the project team to improves their project approach
Meet customer expectations and commitments
Execution of Project Management according to the ams project execution requirements
Reports project progress and gate/milestone passing in the meetings
Ensure planned project activities are executed timely to meet the production start schedule
Professionally manage risk management, use of tools as FMEA and Maturity Matrix
Manage change requests and problem reports
Ensure design and implementation meets DfX requirements including formal review meetings
Align with Program, Engineering, Marketing and Product management to meet customer expectations
Timely escalation of issues and risks to management and ownership to resolve issues
Maintain close co-operation with customers and suppliers during development project
Actively participate in ams internal knowledge sharing forums related to Project management
|
Project Manager
|
India |
Research & Development |
2019-07-10 |
Lead and supervise a team of QA assistants to carry out the day to day QC operation.
Early involvement in NPI products. Evaluate materials and identify key issues relating to product, process & quality system.
Conduct periodic MSA and correlation study on IQC equipments.
|
Snr Staff Engineer, PQE (VCSEL)
|
Singapore |
Quality |
2019-07-02 |
The Package Design Engineer is a required position that is integral to the development of sensor module devices. This additional position is necessary to match the increase in resources and work coming from the silicon design team expansion. This position is responsible for the opto-mechanical design, optical simulation modeling and optical analysis work required during all optical sensor module product developments.
Miniature semiconductor device package design and implementation
Semiconductor optics design and implementation
Become an integrated part of the ams package design team worldwide
Optical device simulation and performance analysis
Optical device design performance optimization
Optical semiconductor device test system mechanism and package design
Coordinate with semiconductor packaging vendors
Interface cross-organizationally and direct with customer
Cooperation with subcontractors
Source for customer facing technical documentation content
New product proposals, technical marketing support
Technical support at product launches
|
Senior Staff Engineer, Opto-Mechanical Engineering
|
India |
Research & Development |
2019-06-25 |
This is a dual role position responsible for both hands-on lab technician work plus data collection tasks in the optical lab. In the role of technician, this person will be responsible for any work requiring soldering, rework, mechanical assemble, etc. As a data collection technician, this person will be responsible for following the systematic process of optical characterization data collection under the guidance of the optical engineer.
PCB and mechanical automation system fabrication and assembly
Engineering lab management
Full optical evaluation and measurement data collection of optical sensor ICs
Population and verification of evaluation hardware
|
Engineer, Lab/Data Collection
|
India |
Research & Development |
2019-06-25 |
Implement the ASIC verification environment
This role requires the candidate to work with RTL Design, Verification, Architecture teams to ensure that chip meets all the feature requirements.
Develop UVM / System Verilog Test bench, including writing checkers and assertions, getting functional coverage collection using cover groups, etc
Support the development of verification test plans, test suites and verification activities which includes environment bring-up, regressions, failure debug, and netlist simulation for tape-out, develop detailed test and coverage plans based on IC specifications
Supporting mixed signal verification which includes analog and Verilog RTL in same simulation environment.
Develop support utilities for verification automation, test bench automation, regression and other verification enhancements to improve productivity and functional coverage
Performing block level and top level design verification
Generation of relevant documentation (DV Plan, DV execution plan, customer reviews, etc.)
Create and patent new IPs
|
Staff Engineer, Digital Design Verification
|
India |
Research & Development |
2019-06-25 |
Analog and mixed-signal verification of circuit blocks and subsystems in Cadence and Synopsys environments using System Verilog modeling
Write, debug, and run test-benches using Verilog-A/Verilog-AMS/System Verilog to verify both models and transistor-level circuits for all operating modes using the AMS-Designer environment
Creation and validation of System Verilog models for mixed signal circuit blocks
Create, debug, and run test-benches and scripts to execute transistor-level performance verification over design corners using circuit simulators
Proficiency in System Verilog and UVM including: writing checkers and assertions, customizing constraints, etc.
Develop support utilities for verification automation, test bench automation, regression and other verification enhancements to improve productivity and functional coverage
Support the development of verification test plans, test suites and verification activities which includes environment bring-up, regressions, failure debug, and netlist simulation for tape-out, develop detailed test and coverage plans based on IC specifications
Performing block level and top level design verification
Generation of relevant documentation (DV Plan, DV execution plan, customer reviews, etc.)
|
Staff Engineer, Mixed Signal Design Verification
|
India |
Research & Development |
2019-06-25 |
Analog Design, guidance in Layouts, Validation of packaged device, excellent skills in debug, Knowledge preferably in ESD, EMI/EMC. Design experience of LDOs, Bandgap, DCDC converters, Oscillators, Low/High side Drivers, sigma-delta converters, PGAs
Design & verify high-performance analog/mixed-signal blocks & systems
Design of robust Analog circuits for RF immunity and performing periodic steady-state simulations to assess the RFI impact.
Analyze and debug independently the parasitic extracted netlist to optimize the performance.
Define & track ATE requirements to meet Design for Manufacturing and process capability
Generation of relevant documentation including: internal design documents, test requirements, etc
Create and patent new IPs
Close cooperation with team and Design engineer to get better layouts. Continuous contribution to workflow and process improvement
|
Staff Engineer, Analog /RFI Design
|
India |
Research & Development |
2019-06-25 |
Software design for Embedded Systems (ARM Microcontroller) in the area of 3D cameras
Software implementation including documentation and peer reviews
Software testing including test specification, test implementation and test automation
Code reviews with peers
Contribution to software effort estimation and planning
New ideas, new product proposals
Company internal support for released software components
|
Engineer, Software - Firmware
|
India |
Research & Development |
2019-06-24 |
We offer you an attractive and challenging job that allows you to grow to an internationally recognized image sensor expert. Within the design team, you are one of the technical leaders for the development of the image sensor.
Define architecture of the image sensor (analog chain)
Define building block specifications, follow-up on building block design with the other team members
Define test plan to characterize the image sensor
Support the characterization of the sensor in the lab
Coach the team and guide the design to successful tape-out
Prepare and report technical progress to project manager and customer
|
Senior Analog Design
|
Belgium |
Research & Development |
2019-08-15 |
Work with support functions essential to sales force productivity. These include planning reporting, quota setting and management, sales process optimization, sales job design, sales training, sales program implementation
Responsible for the overall productivity and effectiveness of the channel sales organization
Work with and support the VP of Global Distribution Sales to drive channel sales strategy and ensure all channel sales organization objectives are met
Support the equitable assignment of sales force quotas and ensure quotas are optimally allocated to the channel sales team
Proactively identifies opportunities for sales process improvement. Works closely with sales management to inspect sales process quality and prioritize opportunities for improvement. Assists sales management in understanding process bottlenecks and inconsistencies. Facilitates an organization of continuous process improvement
Monitors the accuracy and efficient distribution of sales reports and other intelligence essential to the sales organization. Recommends revisions to existing reports, or assists in the development of new reporting tools as needed
Possessing Ship & Debit working process knowledge and experience, you will study current processes in ams, design and implement additional processes and/or procedures to enable ams to implement Ship and Debit model in the company with our distributors in 2019
Be the gatekeeper of distribution contracts as you work with account managers to ensure customers agree to ams terms and conditions and close loop with legal
Oversight on channel sales forecasting and drive funnel management integrity
Remain knowledgeable of key processes, business initiatives and internal resources in order to assist the sales team and recruitment in accomplishing company goals
Work closely with Sales Managers and the Regional Sales Controllers to address contract issues or concerns and to ensure the timeliness of contract review
Identify opportunities and weaknesses within Regions and make proposals to create value and increase operational efficiency
Continuously research and remain knowledgeable of industry trends and competition
|
Principal Specialist , Global Distribution Sales Operations
|
Singapore |
Customer & Sales Support |
2019-06-06 |
Implementation and Verification of new digital libraries for the design kit
Evaluation and Implementation of new CAD software into the design kit
Support of Digital Backend Flow
Writing of documentation for internal and external use
Provide support for design projects
Internal/Customer Trainings
|
Staff Engineer, Digital Design Support (m/f)
|
India |
Research & Development |
2018-12-19 |
You will have end to end ownership of execution of IOS products starting from Work statement creation, driving silicon development milestones, IP, validation, documentation, etc.
By managing both internal and external deliverables, you will work to ensure IOS products are delivered on time.
This role provides an excellent growth opportunity for high performing individuals looking to make a difference and deliver a stand-out experience to our customers.
The ability to establish and drive to goals including plan of record, timelines, budget, scope, performance and quality will be critical to success. A passion for creating plans and working with a diverse team of creative engineers and senior executives is necessary for this critical and highly visible role.
The applicant must be a team player with a commitment to meeting deadlines and an aptitude to thrive in a fast paced, multi-tasking environment.
|
Senior Project Manager (m/f/d)
|
Austria |
Research & Development |
2019-04-23 |
Design and development of camera systems architectures for 3D imaging systems
Analyze and simulate 3D imaging systems including receiving optics and image sensors key parameters
Drive system architecture definition and defining system trade-offs, interfacing with optical engineers, IC designers and system engineers
Support SW/FW development team with definition of interface specifications/requirements between camera and Android HW/SW platform.
|
Senior Camera Staff Engineer
|
Switzerland |
Research & Development |
2019-03-13 |
• Work closely with ams Sales team directly supporting customers in the technical promotion (presentation/demonstration) of ams sensor products.
• Technical focus would be on applications involving optical sensors and 3D facial ID.
• Support selected Distribution and Sales Rep partners to provide technical training and customer applications support.
• Be able to provide effective problem solving and troubleshooting skills in the field.
• Identify applications, create application block diagrams and provide feedback to the ams business lines regarding target markets including system architectures, circuits and components.
• Work closely with sales team on new account development and expand the ams product base at existing accounts.
• Collaborate with business units, sales teams, distributors and customers. The role includes proactive support of customer design engineers and help sales drive design wins.
|
Staff Engineer, Field Applications (Bay area)
|
United States |
Customer & Sales Support |
2019-02-04 |
Within the design and development of spectral sensor solutions:
• Perform basic and complex optical system and light solution design analysis
• Design system-level optical simulation models. Perform extensive optical and light behavior analysis. Interpret and report on results including recommendations on optimization.
• Defining and implementing optical systems with internal and external partners
• Be an innovator and thought leader; regularly develop and protect new IP through patent filings
|
Sr Staff Engineer, Optical Development
|
Germany |
Research & Development |
2019-02-07 |
Within the design and development of spectral sensor solutions:
• Define advanced package requirements
• Select and qualify advanced package technologies, materials and surface mount processes
• IC package design and assembly process development
• Package reliability investigations and failure analysis
• Support production ramp-up and process optimization programs
• Interface to process-, assembly and product reliability engineering, test, IC design
• Support the selection, evaluation and co-ordination of subcon. manufacturing
|
Principal Engineer, Advanced IC Packaging Development
|
Germany |
Research & Development |
2019-02-07 |
Responsible for managing Assembly Subcontractor on site Pactech Malaysia and other suppliers for TSV bumping
Supports product development, product qualification and release to production achieve expected quality level on time
Monitors closely the assembly manufacturing process to maintain and improve specified quality levels, yield, cycle times and cost
Processing of customer complaints, initiates, and recommends corrective action on the basic of technical analysis, follow up corrective and improvement
Managing subcontractors / suppliers
|
Senior Staff Engineer, Assembly
|
Malaysia |
Operations & Manufacturing |
2018-10-22 |