Reliability investigation and process qualification (Transistor stability: Hot Carrier Instability (HCI), Biased temperature instability (NBTI),
Oxide reliability: Defect density (DD) and lifetime evaluation (Econst), Metalstability: Electromigration (ELMIG))
Electrical characterization of new process families or modules
Lifetime monitoring of process families
Determination of maximum operating condition
Evaluation of new testmethodes in the areas of process characterization and reliability investigation
Additional lifetime investigations on Stress migration, resistor and diode stability
|
Process Reliability Engineer (m/f/d)
|
Austria |
Quality |
2020-11-02 |
• Test program test time optimization
• Improve Test Program Stability and Yield
• Platform Transfer of Test Hardware and Test Programs
• Ramp up support on new products
• Documentation on changes/release of test programs
• Tight cooperation with BL Test Development/Design and Operations team
|
ECOE Test Engineer
|
Philippines |
Operations & Manufacturing |
2021-06-18 |
Assistance of the EVP Semicon Operations and the Management Team
Areas of activity as an assistant to the EVP Semicon Operations include travel management (flight, hotel and pick-up organizations, credit card bill deduction and travel expenses reimbursement), meeting coordination (internal and external meetings, room bookings, catering services etc.) and consolidation of weekly reports for Operations JF (e.g. preparing presentations)
Acting as Team assistance for FAB B - Management Team
Responsibilities as Team Assistance of FAB Management concerns travel management for Operations Team in Premstaetten, support on legal loops and FAB reports/presentations, coordination of FAB A & B windows tours and acting as contact to externals (e.g. service technicians, requests for FAB B etc.)
Administrative Tasks such as maintenance of FAB sharepoint pages, managing distribution lists, administration of office space in FAB B and meeting rooms
As a competent apprentice trainer, you train our apprentices, support them in professional practice and act as a contact person
Settlement and organization of the kilometer allowance and overtime sheets
General tasks such as creating shopping carts for office materials, fab materials, tools, services etc. and responsible for postal services
|
Assistant to Operations Department (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-06-21 |
Technical coordination of IR photodiode projects
Technical expert for epitaxial growth and frontend wafer processing
Efficient and effective reporting to stakeholders to maintain commitments
Characterizing technology in development by test, analysis and work out in conclusive reports
Applying problem solving methods (like 8D, Fishbone, etc.) and risk analysis (like FMEA)
Working in team-oriented atmosphere with a strong focus on thorough documentation and completing projects timely and successfully
Submitting new innovative process and device concepts as patent proposals
|
Senior Staff Engineer, Process R&D III-V
|
Singapore |
Research & Development |
2021-06-21 |
Responsible for Customer Complaint Management, leading the 8D team. Performs failure analysis, structured problem solving, and 8D reporting. Ensures thorough implementation and effectiveness of corrective actions.
Proven ability to lead taskforce solving RMAs/customer issues – drives Root Cause Analysis, Initiates and drives the implementation of containment/corrective actions.
Crisis Management – Lead crisis team for major customer excursions (RMAs on high-volume products); Manage and align all activities for customer excursions including EFA, PFA, root cause analysis and definition of corrective actions; Communicate results and activities to customer.
Responsible for reliability assessment for suspect materials.
Provides Quality Engineering support and work with ams AG internal organization to resolve quality issues at customer side and improve product quality in the field
Responsible for Quality Engineering of Process/Product Change Qualifications in course of PCNs. Develops Qualification Plan, plans and oversees execution, creates Qualification Reports.
|
Customer Quality Engineer
|
Philippines |
Quality |
2021-06-18 |
Responsible for design verification of mixed signal IC’s in a digital / mixed signal design environment
Primary focus is on mixed signal design verification, but proficiency with digital design verification (including UVM) is an plus
Creation and validation of System Verilog models for mixed signal circuit blocks
Proficiency in System Verilog including: writing checkers and assertions, customizing constraints, getting functional coverage collection using cover groups, etc.
Experience running both analog (SPICE) and digital simulators is a strong advantage
Technical and team leadership – both within the internal project DV team, but also directly supporting demanding customers.
Creation of test benches and automated verification simulations
Performing block level and top level design verification
Generation of relevant documentation (DV Plan, DV execution plan, customer reviews, etc.)
|
Graduate Design Verification Engineer
|
United States |
Research & Development |
2021-06-17 |
Responsible for design and development of mixed signal IC’s from initial concept until production ramp, including design for: manufacturability, yield, test, and reliability.
Performs and supervises detailed design, simulation, verification and validation of integrated circuits.
Experience designing for system / application level concerns, including: packaging, parasitics, power, die size, cost, etc.
Expertise with SPICE simulations, including: PVT, Monte Carlo, mixed signal, modelling, optimization, etc.
Provides positive internal team leadership and communication, coordination of design requirements and tradeoffs, preparation for weekly meetings (internal and customer).
Technical communication with customer (and/or marketing), including: presentation in design reviews, representing the analog design team on weekly conference calls, defining / tracking / working to insure schedule adherence, interactive problem solving and customer communication under pressure, etc.
Creative problem solver, able to generate new IP and file patents
Generation of relevant documentation including: design reviews, internal design documents, test requirements, etc.
Calm professional demeanor and excellent listening skills
Ability to mentor
An understanding of mixed signal design verification (in a UVM environment) is a plus
|
Senior Analog Design Engineer
|
United States |
Research & Development |
2021-06-17 |
A major trend in Health Care Technology is to enable mobile Point-of-Care (PoC) diagnostic or personalized monitoring of health parameters. The integration of biochemical and photonic technologies is behind the most advanced, fast, portable diagnostic tools (e.g. lab-on-chip) available to the physician, who can deliver and send analytic results from distant PoC through a connected digital interface.
AMS OSRAM is among the leading enterprises in the world offering a unique portfolio of photonic sensing, illumination and visualization products for life, mobility and healthcare. We are interested in developing further photonic applications for our digital health segment by offering a three years grant to obtain a PhD degree.
The candidate is expected to evaluate the technological and market potential of infrared single photon counting detectors and/or integrated optics (IO) devices for diagnostic tools in health care.
These two project guidelines aim from one side at understanding the diagnostic possibilities offered by the large penetration depth of infrared radiation in biological tissues, from the other side to develop IO devices to interrogate optically many microfluidic channels simultaneously.
The candidate will investigate the existing literature, design photonic devices, develop simulation codes, setup experiments and validate sensor concepts.
The work will be supported by the well-equipped R&D infrastructure of AMS OSRAM and by a network of academic and industrial collaborations.
The project is expected to result in scientific publications and/or patent applications. Successful sensor prototypes will be finally selected for the development of a new product concept and its market potential investigated.
AMS OSRAM offers a dynamic, creative and stimulating environment and an attractive contract including health care insurance and pension scheme.
|
PhD student - Photonics for Digital Health (m/f/d)
|
Germany |
Research & Development |
2021-06-15 |
Bedienung von hochkomplexen Anlagen, automatisierten Anlagen zur Waferfertigung
Kontrolle der durchgeführten Arbeiten auf der Waferoberfläche per Mikroskop
Diverse Messungen von Schichtdecken, Widerständen, Partikel usw.
|
Test-Operator in der Nachtschicht (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-06-15 |
Sales & Marketing Business Partner position focusing on Marketing, digital campaign management & web / eCommerce excellence
Partner with key marketing and sales stakeholders worldwide
Business Partnering role is a strategic role, requiring senior business consultancy skillset to explore and drive disruptive innovative ideas, build solution roadmaps with the business, evaluate incoming ideas and requests incl. evaluation of business benefit as well as likely realization complexity and cost
|
Senior Business Expert Shop Platform (m/f/d)
|
Germany |
IT |
2021-06-15 |
Sales & Marketing Business Partner position focusing on Marketing, digital campaign management & web / eCommerce excellence
Partner with key marketing and sales stakeholders worldwide
Business Partnering role is a strategic role, requiring senior business consultancy skillset to explore and drive disruptive innovative ideas, build solution roadmaps with the business, evaluate incoming ideas and requests incl. evaluation of business benefit as well as likely realization complexity and cost
|
Senior Business Expert Shop Platform (m/f/d)
|
Austria |
IT |
2021-06-15 |
Bedienung von hochkomplexen, automatisierten Anlagen zur Waferfertigung
Kontrolle der durchgeführten Arbeiten auf der Waferoberfläche per Mikroskop
Diverse Messungen von Schichtdicken, Wiederständen, Partikel usw.
Vollkontinuierlicher Wechselschichtbetrieb
|
FAB B Operator (m/w/d)
|
Austria |
Operations & Manufacturing |
2021-06-14 |
Ability to integrate mechanical, electrical and computer fields in designing systems that utilizes the principles of all engineering streams to solve problems.
Ability to integrate mechanical, electrical and computer fields in designing systems that utilizes the principles of all engineering streams to solve problems.
Reduce human intervention as much as possible, reduce the manufacturing cycle time and ultimately increase the net profit of the industry.
Excellent problem solving skills and communication skills with high self-organizing skills
With strong background in Assembly, Test and Tape and Reel processes
With strong background in Assembly, Test and Tape and Reel processes
Work with customers and suppliers to define materials specifications, fabrications and programming related issues.
Ability to coordinate and communicate well with customers, suppliers, end users and other development teams.
Ability to prepare basic design for software, instrumentation and control related documents
Ability to create & document user manuals for end users.
|
ECEI Automation Engineer
|
Philippines |
Operations & Manufacturing |
2021-06-11 |
Line Control
PM coordination and capacity planning
Meeting moderation (Foremen, Maintenance, Engineering)
Contact person for SCM and BL requests
Support at Process Integration and Engineering Tasks
Participation / Backup moderation iMRB, PCRB meetings
Support in planning Wafer Starts
Basic tasks at Promis
|
FAB - Line Control Mitarbeiter (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-06-11 |
Lead and Manage Sourcing individual contributors
To recruit, train and develop a high performing procurement team
Support the team to develop and execute the sourcing strategy for the assigned category / categories
Lead and drive sourcing team to execute category strategies across the organization; ensure coherent supplier selection, sourcing decisions and product development
Lead team to formulate negotiation strategy and lead negotiation on complex agreement to achieve annual saving goals
Periodic performance review to meet / exceed KPI
Interface with site leadership and stakeholders on procurement strategies
Initiate and sustain effective communication on sourcing goals with site leadership and stakeholders
Align procurement strategies with execution of site procurement tactics
Accountable for sourcing board proposals and sourcing decisions
Accountable for sites’ escalations while offering options and recommendations for effective solution
To enlist site leadership, when appropriate, to help reinforce commitment and involvement from suppliers
Lead internal stakeholders and cross-functional teams to manage supplier performance via the sourcing team approach in support of company goals
Manage supplier relationship and performance
Lead the team in developing supply base for assigned category to support current and future business needs; and achieve key business objective of Time to Market, Total Cost of Ownership, and Supply Continuity
Lead team to build and sustain a strong supplier relationship together with cross-functional team using Business Review Meeting, Supplier Rating System, driving Supplier on improvement plan
Conduct supply risk assessments, establish and drive mitigation plans accordingly
Manage and own operational metric
Promote continuous cost reduction and quality improvement
Develop, communicate, and monitor department performance metrics
Support business contract review and negotiation
Support team to establish supplier capacity corridor to ensure supply assurance
Ensure procurement support to SQE on supplier audit
|
Senior Manager, SCM
|
Singapore |
Supply Chain Management |
2021-06-11 |
Contribute high-impact cross-functional / cross-divisional strategy projects for ams Osram
Become a sought-after advisor on strategic issues for ams Osram's top management
Develop consistent strategy recommendations and manage their implementation
Drive decision making for merger & acquisition considerations of significant importance and high impact
Help to develop new tools and methodologies for Strategy Development or Lead the development of new tools and methodologies for Strategy Development
|
Principal Project Manager Corporate Strategy (m/f/d)
|
Germany |
Central Functions |
2021-06-07 |
Lead high-impact cross-functional / cross-divisional strategy projects for ams Osram
Become a sought-after advisor on strategic issues for ams Osram's top management
Develop consistent strategy recommendations and manage their implementation
Drive decision making for merger & acquisition considerations of significant importance and high impact
Help to develop new tools and methodologies for Strategy Development or Lead the development of new tools and methodologies for Strategy Development
|
Senior Director Corporate Strategy (m/w/d)
|
Germany |
Central Functions |
2021-06-02 |
Principal focus to lead and resolve all equipment related major and minor stoppages and to optimize equipment Uptime and performance while minimizing variability and supporting production team.
Focus on the various VCSEL engineering / PROTO sample delivery to customer/subcon, new product recipe creation and Reliability samples preparation.
Ensure all Die Sorter or Pick and Place equipment PMs and PM specs are always up to date and all maintenance activities completed on schedule and as per procedure.
Vendor/Supplier management on equipment issues and support level.
Lead and provide technical guidance to the team of equipment technicians in maintaining tool performance and Uptime/MTBF improvement.
Lead continuous improvement projects and solutions in regards to Die Sorter/Pick and Place operations, e.g UPH, Yield, Cost, Productivity, etc.
Lead on spare part management, establish sufficient essential spares and consumables stock levels and cost minimization.
|
Engineer, Die sort / Pick & Place
|
Singapore |
Operations & Manufacturing |
2021-06-01 |
Work closely Master Planning and Operation Team within AMS to support business requirement with minimum material liability
Liase with Supplier to ensure on time delivery of material to support demand FC.
Take on business lead role in subcon process and system improvement projects.
Streamline and drive processes standardization and continuous improvement to effectively support the operating plan and allow optimizing execution to plan
Conduct routing meeting with Supplier to close capacity gap and shipment improvement issue.
Negotiate and secure capacity requirement with Supplier to ensure support to business change dynamic. Including any off S&OP cycle demand changes support required
Ensure on-time delivery commitment to support ams demand forecast and timely escalation for delay and recommit deliveries.
Take initiative and actively ensure system capacity statement accuracy to actualize external manufacturing commit
Ensure system capacity accuracy to actual external manufacturing commit
Perform proper Good Received and ATI activities of shipment.
Drive FSO KPI and ensure supply deliveries to commitment and perform monthly and weekly KPI reporting
Supporting role to support System & process improvement initiatives/projects
Participating in annual audit at subcontractor, Supplier Rating and Business Review Meeting
Contributor in System and reporting enhancement & projects management.
|
FSO Specialist
|
Singapore |
Supply Chain Management |
2021-06-01 |
Maintain and improvement equipment performance (Work with outside vendors for specialist advice and arrange for service support where necessary)
Initiate the improvement plan for sputter equipment, product performance and cost reduction project
Work closely with Process Engineers to monitor and improve the process capability
Provide training and guidance to technicians
Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs.
|
Staff Engineer, PVD Equipment
|
Singapore |
Operations & Manufacturing |
2021-06-01 |
Fronting and close communication and managing end customer expectation
Weekly update on end customer’s tracking reports
Work closely with factory planning on config. build plan, prebuild, raw material depletion and E&O reduction
Weekly material demand and Supply analysis
Ensure sufficient PO coverage for all BOM materials per lead-time, and weekly reschedule/cancellation of PO aligned with latest approved loading plan
Weekly MRP / component forecasting release to suppliers
Report parts supply issue ahead of time and work with procurement and supplier on expedited mode of shipment to ensure supply continuity
Work closely with procurement team to resolve pricing, liability and commercial issue
Work closely with warehouse on scrap, cycle count, SAP data verification
Work closely with engineering team on BOM discrepancy in term of actual usage vs plan, TECN and EC changes
Work closely with QA team on raw material shelf life extension and depletion
Constantly review MOQ per latest requirement to minimize EO & Shelf life exposure risk
Handle IQC rejects with SQE, including RTV to suppliers
|
Senior Specialist (A)
|
Singapore |
Supply Chain Management |
2021-06-01 |
Lead and manage Epi Operations maintenance and process engineers
Drive Epi defect reduction and Yield-up initiatives to improve value
Collaborate with Production and Plan Equipment Maintenance schedule
Transfer existing Epi products and process to receiving plant
Work closely with Epi design house on RnD pilots to provide refinement on upcoming leading-edge Epi designs
|
Epi Operations Manager
|
Singapore |
Operations & Manufacturing |
2021-05-31 |
Warenannahme & Wareneingangskontrolle
Kommissionierung & Warenausgabe
Verbuchung von Materialbewegung im ERP-System (SAP)
Allgemeine Lagerarbeiten (Bestandskontrolle, Lagerorganisation, 5S-Lagerordnung)
Inventurarbeiten
Abwicklung Projekte und Audits
|
Warehouse Logistics Specialist (m/f/d)
|
Austria |
Supply Chain Management |
2021-03-29 |
Wir sind auf der Suche nach talentierten SchülerInnen und StudentInnen, die sich für Mikroelektronik begeistern. Ein Ferialpraktikum bei ams ist eine gute Gelegenheit, unser Unternehmen kennenzulernen und wertvolle Branchenerfahrung zu sammeln. Im Bereich der Produktion bieten wir Praktikumsplätze in unserer FAB(Wechselschicht oder Nachtschicht) an.
|
Ferialpraktikum im Bereich Produktion (m/f/d)
|
Austria |
Human Resources |
2020-11-18 |
Establish project plans with TL (Technical Lead), check for logistic constraints, resource, lead-time, etc.
Drive project execution according to Engineering process
Track and report projects according to project management standards (e.g. IPMA and/or PMI)
Trigger and follow-up all actions which arise from project status meetings
coordinat activities between the different teams (e.g. design, application, product management, operations, assembly, quality and marketing)
Complete and support project risk assessments. Escalate issues to project steering board and project owner to ensure successful project execution
Define resource requirements, gaps and contingency plans
Responsible for all aspects of the projects to ensure success - identifying critical path, critical risks
Understand barriers, challenges, and trade-offs in all functional areas (chip design, test development, application, SW, firmware, Product & Test Engineering, quality, sourcing, customer engineering, marketing, etc.) in order to maintain a coherent plan for delivering to schedule, product cost and revenue
Troubleshoot project issues at both a managerial and technical level and helps to develop alternative project tasks, schedules, milestones, resource plans, processes etc. to resolve project issues and conflicts
Lead problem resolution, identifying required resource, tasks and investigation path to quickly solve issues to maintain schedule through and product productions and market launch
|
Senior Project Manager (m/f/d)
|
Germany |
Research & Development |
2021-05-28 |
Establish project plans with TL (Technical Lead), check for logistic constraints, resource, lead-time, etc.
Drive project execution according to Engineering process
Track and report projects according to project management standards (e.g. IPMA and/or PMI)
Trigger and follow-up all actions which arise from project status meetings
coordinat activities between the different teams (e.g. design, application, product management, operations, assembly, quality and marketing)
Complete and support project risk assessments. Escalate issues to project steering board and project owner to ensure successful project execution
Define resource requirements, gaps and contingency plans
Responsible for all aspects of the projects to ensure success - identifying critical path, critical risks
Understand barriers, challenges, and trade-offs in all functional areas (chip design, test development, application, SW, firmware, Product & Test Engineering, quality, sourcing, customer engineering, marketing, etc.) in order to maintain a coherent plan for delivering to schedule, product cost and revenue
Troubleshoot project issues at both a managerial and technical level and helps to develop alternative project tasks, schedules, milestones, resource plans, processes etc. to resolve project issues and conflicts
Lead problem resolution, identifying required resource, tasks and investigation path to quickly solve issues to maintain schedule through and product productions and market launch
|
Senior Project Manager (m/f/d)
|
Austria |
Research & Development |
2021-05-28 |
Support Global HR BP’s in implementing HR processes across divisions in the full range of HR BP tasks such as HR controlling, talent development, comp&ben topics etc.
Report the use of HR metrics and propose appropriate actions
Learning and Development: Support training need analysis and coordinate the outcome with the respective local HR
Coordinate and support the HR BP in all Talent Management activities
Serve as a contact point for managerial level
Be part and deliver on complex HR projects cross functionally
Partner with managers to deliver the agreed HR BP spectrum of HR tasks
Prepare presentations, reports and support with operational daily business
|
HR Business Partner Associate (m/f/d)
|
Austria |
Human Resources |
2021-05-28 |
Technology responsibility in the semiconductor IC fabrication
Supervise process technologies for manufacturing of ICs in close teamwork with Process Engineering, Process R&D, QA, et al.
Optimize processes and solve process problems in teamwork with staff from different departments (e. g. Test, Product Engineering, Design, Design Support,QA, et al)
Evaluate and implement possible process simplifications in order to lower manufacturing costs
Transfer new technologies / process modules from process R&D into production
Take PI responsibility at customer audits
Stabilize technologies supervising lead products of the business units
Improve yield for products via use of defect engineering
Perform physical failure analysis
Support installation of new technologies in house to fulfill optical requirements
|
Process Integration Engineer (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-05-28 |
Process responsibility in the semiconductor IC fabrication
Sustaining of existing processes in terms of quality-, performance- and throughput improvement
Characterization and implementation of new equipment
Development of new unit processes
Development and implementation of system/product monitoring strategies
Lead continuous improvement programs (also in cooperation with other departments)
Identification and solving of potential process- and equipment problems
Responsible for quality improvements
Technical interface to suppliers
|
Process Engineer FSP (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-05-28 |
Process responsibility in the semiconductor IC fabrication
Sustaining of existing processes in terms of quality-, performance- and throughput improvement
Characterization and implementation of new equipment
Development of new unit processes
Development and implementation of system/product monitoring strategies
Lead continuous improvement programs (also in cooperation with other departments)
Identification and solving of potential process- and equipment problems
Responsible for quality improvements
Technical interface to suppliers
|
Process Engineer FSP (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-05-28 |
Bedienung von hochkomplexen Anlagen, automatisierten Anlagen zur Waferfertigung
Kontrolle der durchgeführten Arbeiten auf der Waferoberfläche per Mikroskop
Diverse Messungen von Schichtdicken, Widerständen, Partikel usw.
|
FAB B Operator (m/w/d)
|
Austria |
Operations & Manufacturing |
2021-05-27 |
Assist and hands on preparation on day to day finance operational and administrative matters
Liaise between local business stakeholders and Finance SSC Asia AP team
Prepare and reconcile all intercompany and inter-branch billing and liaise with local admin on fund clearance documentation to the bank
Support to Prepare monthly actual cash flow update, short-term and long-term cash-flow forecast
Review expense report to ensure GL accounts are assigned correctly to the expense categories
Perform monthly bank reconciliation for regional entities
Work with outsourced finance providers on month end closing and ensure accurate and complete compilation and financial report within the given tight timeline
Perform variance analysis on the monthly financial statements, and prepare review pack for management review
Prepare monthly dashboard, trend analysis on key expenses and key highlights
Prepare and update balance sheet schedule accordingly to the stipulated requirement with relevant movement and supporting
|
Senior Specialist, Finance (6 months Contract)
|
Singapore |
Finance & Controlling |
2021-05-27 |
We offer a six months fulltime internship with focus on people & leadership development (start date: immediately if possible)
You support the harmonization process due to the exciting merger of ams and Osram in people development matters; we merge two worlds into something greater
Thereby, you support the new set up of the performance management process and the implementation in SAP SuccessFactors
You participate in testing's and coordinate the User Acceptance Tests, collect feedback and adapt the system accordingly
You set up performance dashboards, KPI’s and other reportings
Furthermore, you help the team in leadership and high potentials programs and events
You contribute to our good team atmosphere
|
HR Internship People & Leadership Development (m/f/d)
|
Austria |
Human Resources |
2021-05-26 |
perform active Stakeholder Management with focus but not limited to M&A, Legal, Finance and Tax functions as well as to nominated project sponsor, Steering Committee and key players
structure and plan project in regards of roles, resources, budget, scope & objectives, interdependencies and timelines towards achieving the targets
responsible to lead projects in regards of team - scope fullfillment - time - budget
Prepare IT book / KIP for the integration / carve out
support to consult the strategic program / project sponsor in planning & initializing the overall project structure
project controlling reg. quality - cost - time - target fullfillment and actively perform risk mitigation
prepare and lead decision making processes within project team as well as with Steering Committee
Responsible in the project for IT related SLA/TSA creation and alignment between involved stakeholders
Support the negotiation wiht the M&A partner and suppliers
|
IT Project Manager (m/f/d)
|
Germany |
IT |
2021-05-11 |
Responsible for supporting requests falling under production fails, special FA requests, qualification failure analysis request and customer return failure analysis.
Responsible for supporting reliability qualifications, monitoring, risk assessment and special investigations for suspect materials within the accepted timeline.
Responsible in performing preventive maintenance on Failure Analysis and Reliability equipment
Responsible in performing key administrative tasks.
Provides quality engineering support and work with ams AG internal organization to resolve quality issues at customer side and improve product quality in the field.
Support taskforce any quality issues internally and externally through efficient and effective problem solving skills.
|
FAREL Technician
|
Philippines |
Quality |
2021-05-25 |
Process optimization of an integrated photonic chip with waveguide based photonic elements. Minimization of optical losses and performance improvement.
Development of new concepts for coupling of light to the waveguide and advanced photonic functional elements.
Steering of wafers in the fabrication and development of in-line metrology for stable manufacturing.
Characterization of photonic elements and circuits. Optimization of photonic measurement systems.
Keeping contact between University work group and ams development team.
Manufacturing and characterization of a demonstrator photonic integrated circuit (PIC)
|
PhD Photonic Technology (m/f/d)
|
Austria |
Research & Development |
2021-05-19 |
Development/optimization of an infrared detector based on GaAs or GaSb in the framework of a PhD thesis.
Growth of epitaxial layers and processing of wafers in University facilities and ams fabrication site.
Keeping contact between University work group and ams development team
Metrology, characterization of the processed material (crystal defects, geometric parameters, etc) and evaluation of the final device
Supported by the University of Lancaster (for this reason most of the time is spent in Lancaster)
|
PhD IR Technology (m/f/d)
|
Austria |
Research & Development |
2020-06-11 |
This Corporate Account Manager role owns the go-to-market strategy and is positioned as the Single Point of Contact for specific distributor partner(s). They own alignment of supplier products with current market direction, creation of growth plans, and oversight of marketing program execution.
With primary focus of our Corporate Account Manager is to drive positive results for ams-Osram and the Distributor Partner in three critical areas. These areas are: Profitable Revenue, Demand Creation and Influential Relationships.
What you’ll be doing:
Profit Enhancement: Corporate Account Managers are responsible to maximize the profit and sales opportunity of their assigned distributor at ams-Osram Group. They are positioned to generate programs, drive strategies and create solutions to drive profit business results for ams-Osram.
Demand Creation: Our Distribution/Mass Market Team works closely with Engineering and Design Services to develop, manage and maintain their assigned distributor’s Demand Creation efforts. The goal is to create a winning combination of products, support, and processes that drives maximum success for their distributor’s Selling Groups. Success is measured by their design activity as well as other areas, such as margin alignment, increased sales and customer growth as a result of the collaborated efforts.
Distributor and ams-Osram Relationship: As stated, the Corporate Account Managers are the focal point for their assigned distributor(s) as they engage and do business with ams-Osram. As the single point of contact you will work to ensure that the appropriate groups within ams-Osram are effectively engaged with our distributors. They also are the voice of the distributor into ams-Osram and all our various operating, support and sales groups. Success is typically measured by revenue and profit results.
|
Corporate Account Manager
|
United States |
Sales |
2021-04-28 |
To own lithography process including track, stepper and aligner.
To manage overlay and CD recipe and measurement.
To use automated optical inspection (defects) for defect detection/ inspection
Troubleshoot day to day defect, yield and SPC issues
Work with multiple function groups to ensure on time new product and project delivery for process improvement.
Document processes (FMEA, control plan, work station procedure)
|
Lithography Process Engineer
|
Singapore |
Operations & Manufacturing |
2021-05-17 |
COGS improvement related activities, i.e. driving process and device optimization
Facilitate process improvements and/or fixes for problems of poor quality, low utilization and yield, or high manufacturing cost
Support Process Engineering to improve process robustness process yield and utilization for technologies released to manufacturing
Automate, simplify and standardize processes for mass production
Actively participate in continuous improvement project, learning and skill development
|
Senior Staff Engineer, Process Integration
|
Singapore |
Operations & Manufacturing |
2021-05-11 |
perform active Stakeholder Management with focus but not limited to M&A, Legal, Finance and Tax functions as well as to nominated project sponsor, Steering Committee and key players
structure and plan project in regards of roles, resources, budget, scope & objectives, interdependencies and timelines towards achieving the targets
responsible to lead projects in regards of team - scope fullfillment - time - budget
Prepare IT book / KIP for the integration / carve out
support to consult the strategic program / project sponsor in planning & initializing the overall project structure
project controlling reg. quality - cost - time - target fullfillment and actively perform risk mitigation
prepare and lead decision making processes within project team as well as with Steering Committee
Responsible in the project for IT related SLA/TSA creation and alignment between involved stakeholders
Support the negotiation wiht the M&A partner and suppliers
|
IT Project Manager (m/f/d)
|
Singapore |
IT |
2021-05-11 |
perform active Stakeholder Management with focus but not limited to M&A, Legal, Finance and Tax functions as well as to nominated project sponsor, Steering Committee and key players
structure and plan project in regards of roles, resources, budget, scope & objectives, interdependencies and timelines towards achieving the targets
responsible to lead projects in regards of team - scope fullfillment - time - budget
Prepare IT book / KIP for the integration / carve out
support to consult the strategic program / project sponsor in planning & initializing the overall project structure
project controlling reg. quality - cost - time - target fullfillment and actively perform risk mitigation
prepare and lead decision making processes within project team as well as with Steering Committee
Responsible in the project for IT related SLA/TSA creation and alignment between involved stakeholders
Support the negotiation wiht the M&A partner and suppliers
|
IT Project Manager (m/f/d)
|
Austria |
IT |
2021-05-11 |
Product maintenance and support in high volume semiconductor test manufacturing
Problem analysis in case of Yield problems
Package Test throughput optimisation
Attain target yield as per C-spec
Analysis and disposition of low Yield Batches
Close Cooperation with Test Engineers, Design, Fabrication, Product Engineer and Assembly, working in Cross Functional Teams to improve final test yield and product quality.
Perform Engineering Change Orders
Perform Correlations between different Test Setups and solve correlation problems
Drive cost reduction by test time reduction and Yield improvement
Perform such other related task
|
Test Product Engineer
|
Philippines |
Operations & Manufacturing |
2021-05-11 |
Responsible for supporting requests falling under production fails, special FA requests, qualification failure analysis request and customer return failure analysis.
Responsible for supporting reliability qualifications, monitoring, risk assessment and special investigations for suspect materials within the accepted timeline.
Responsible in performing preventive maintenance on Failure Analysis and Reliability equipment
Responsible in performing key administrative tasks.
Provides quality engineering support and work with ams AG internal organization to resolve quality issues at customer side and improve product quality in the field.
Support taskforce any quality issues internally and externally through efficient and effective problem solving skills.
|
FAREL Technician
|
Philippines |
Quality |
2021-05-10 |
Identify and realize opportunities with existing and subsidiary customers
Develop strategy needed to win the account
Build multi-level customer relationships to support account strategy at each site and coordinate the use of internal resources, including local field application engineers, sales management and business unit staff to drive design wins.
Provide value-added feedback on customer needs to management, business units and customer service teams
Lead pricing and contract negotiations to secure the business
Provide accurate demand forecast and manage customer backlog to ensure orders are booked with adequate lead time
Ensure customers adhere to agreed contractual terms over time
|
Sales Engineer
|
United States |
Sales |
2021-05-10 |
Technology development and implementation of CMOS related process modules
Ability to handle projects and technical activities independently and execute them successfully
Plan, design, perform and evaluate experiments (DOE: design of experiments) for the according modules
Extraction, analysis and assessment of electrical data (PCM: process control monitor, CP: circuit probe, reliability data)
Optimization of the process modules to ensure good manufacturability
Creation of intellectual property
Technical communication with external development partners
|
Senior Staff Engineer Process R&D (m/f/d)
|
Austria |
Research & Development |
2021-05-10 |
You are responsible for the design, development and unit testing of software/firmware in embedded systems including interfaces for communicating with hardware
Be responsible for the software solution definition, architecture and design decisions
You are developing codes according to our standards and integrate with existing solutions
You are the source for customer facing technical documentation content
You act as subject matter expert for engineering level customer support: analyze customer reports and come up with solutions
Hardware / Software co-design is another area of responsibility as a Firmware Engineer
You provide support for hardware department with software for low-level chip analysis
You prepare accurate time estimates for firmware design and development efforts on new projects
Up to 10% international travel (only once COVID-19 travel restrictions are lifted and in accordance with personal risk assessment)
|
Firmware Engineer (m/f/d)
|
Austria |
Research & Development |
2020-09-02 |
Define & execution company wide application segment strategy for Mobile & Wearable including definition of focus applications & key eco-system partners
Identify market trends and emerging application needs and opportunities for Mobile & Wearable segment cross-BL and cross-region
Identify & develop new emerging application solution SAM for Mobile & Wearable
Prioritize Mobile & Wearable application solution portfolio & opportunities based on integral cross-BU/BL business cases
Establish, drive and own the application roadmaps including assessment of competitiveness for solutions and underlying components for Mobile & Wearable
Assemble and lead application solutions teams for prioritized Mobile & Wearable solutions (with lead BL, component BLs, regions, Innovation Office, Strategy Office, CRD if relevant)
Build up application knowledge to shape roadmap and become a trusted advisor at customer for Mobile & Wearable
Assign cross-BL application solution development to lead BU/BL, and monitor execution, for Mobile & Wearable
Support lead BU/BL in developing build eco system partnerships to create complete solutions for Mobile & Wearable
Organize aligned go-to-market across ams-Osram Group for Mobile & Wearable including definition of application solution marketing collateral, position ams-Osram Group as a trusted advisor
Lead the global Mobile & Wearable application marketing team, drive the world-wide global and regional application marketing team Mobile & Wearable
Contributes to the definition of the overall GSM Go-To-Market strategy
Reports to the Head of Global Application Marketing & Architecture (AMA)
|
Vice President Global Application Marketing Mobile & Wearable (m/f/d)
|
Germany |
Marketing |
2021-05-07 |
Define verification strategy for digital and mixed-signal IPs as per system requirements. Define testbench architecture and partition, develop verification plan, and interact with digital, mixed-signal and analog design engineers for feature extraction.
Apply state-of-art methodologies (UVM, Formal Verification) and develop efficient and reusable verification environments and testbench components. Develop IP-level and system-level testbenches maximizing coverage and re-use. Develop constraint random tests, checkers and coverage models based on IC specifications.
Define infrastructure to support mixed-signal verification and analog/real-number behavioral modelling.
Support/Perform execution of verification plans, which includes environment setup, regression running (RTL and gate-level), coverage collection, failure debug.
Support technical communication with customer (and/or marketing) and other work-packages, including: presentation in design reviews, test requirements, defining / tracking / working to ensure schedule adherence and interactive problem solving.
Mentor junior / younger engineers learn required knowledge and experience through projects work.
|
Senior / Principal Engineer, Design Verification (m/f/d)
|
Germany |
Research & Development |
2021-05-07 |
You will be part of the SCM system team and you will work with the team members to prepare, lead or support the rollout of process changes, bug fixes, enhancements to Supply Chain Planning system
Work closely with the Supply Chain Community to support the creation of functional requirement and work with IT on the technical implementation
Ceate training documentation and conduct key user trainings on Supply Chain Planning System topics
Acting as a cross-functional Coordinator & Partner (SNOP, Master Planning and Supply Planning), regarding overall supply chain planning related aspects, e.g. establish business application with supply chain planning feature, drive and facilitate change management
On a daily basis you will need to monitor and maintain APO-CTM planning system run
Keep track of all implementations being done either by IT or by external consultants
Drive basic systems improvements in close alignment with IT (upgrades, memory extension etc)
|
System Specialist, Supply Chain Management (m/f/d)
|
Austria |
Supply Chain Management |
2021-06-18 |
Market intelligence on product level
Product roadmap owner in BL
Identify new product requirements inputs from customers/markets as well as internal groups
Develop competitive roadmap for the BL and benchmark with competition
Represent the products and roadmaps to the customers and sales organization
Be the champion for the technical interface and support design-in efforts
Coordinate and communicate regularly with the engineering and project management team
Lead the definition and the development of product specifications and provide product functionality details for datasheet generation
Prepare product documentation for internal and external purposes
|
Product Marketing Manager, Segment Health (m/f/d)
|
Germany |
Marketing |
2021-04-29 |
Design, implement, test and document solutions for our internal customers (interfaces, technical concepts for solutions, enhancements to existing solutions).
Provide know how during analysis of requirements (i.e., give proposals for solutions).
Analysis of problems/failures during the whole software life-cycle together with our key users.
Help develop and move forward the services of the software development team.
Work in teams and in a self-reliant manner, interacting with internal customers.
Create new interfaces or adapt existing ones to third-party systems.
|
IT Application Engineer
|
Philippines |
IT |
2021-06-21 |
Develop and own segment strategy with focus on key growth areas and opportunity pipeline creation
Define value proposition and be the subject matter expert (SME) on segments and applications
Drive revenue growth and maximize gross margins within segment
Be the Voice-of-the-customer (VOC): Identify customer problem, needs and requirements for solutions
Provide communication management between Sales and Product Management
Identify market and customer needs; work with Product Management to drive business cases for new product development and roadmaps
Lead, manage and execute launch activities of new product introductions in close co-operation with Global Sales and Product Management
Establish and drive key third-party partnerships and ecosystem to increase product portfolio value
Lead Marcom activities supporting our product portfolio, trade shows, customer engagements, and press releases
Develop and execute G2M strategies for segments
Drive product forecasts within assigned segments, both LTP and short-term demand outlook, and the opportunity funnel
Define and manage the sales channel for the market segment in cooperation with Global Sales team
Propose strategic alliances and major projects together with Global Sales Teams
Manage request of business enablers (eval kits, demos)
|
Senior Marketing Manager
|
United States |
Marketing |
2021-04-28 |
Assume full ownership of production phase products from wafer sort to final test and act as central interface for all product related issues
Execute sustaining programs during products life cycle
RMA analysis
Support Quality department in analysis of field returns
Validation of customer complaint parts through lab setup verification, fault localization using various fault isolation techniques/instruments; up to transistor level analysis
Yield improvement and cost reduction
Cooperation with various departments (Design, Test development, Quality, Test) for continuous quality improvement
Feedback problems and solutions to design and production departments (Design for Manufacturability)
Material review (MRB)
Ensure outgoing product quality through lot data review, analysis and disposition
|
Product Engineer
|
Philippines |
Operations & Manufacturing |
2021-04-27 |
Project Integration management within SCM: coordination of tasks, tools, methods, expenses, staffing needs, process tracking, communication between stakeholders, risks, constraints, challenges and contingencies, in order to deliver the project on time and within budget.
Project Scope Management, assuring that the proposed request is actually being performed.
Development and maintenance of accurate delivery schedules that are relevant to project dependencies and resources.
Risk Management: identification, analysis and response to risks that arise and threaten to derail or delay the project
Coordination of internal project resources & delegates of project task based on roles, strengths, skill set, area of authority/expertise
Maintain effective communication and keep all stakeholders up-to-date.
Ensure adherence to relevant standards, process, regulations
Plans, directs and oversees all work packages within a project, ensures all work-streams/sub-teams are functioning effectively and staying on track
Delivers on time. Sets realistic deadlines and communicates consistently to the team and project stakeholders
Identify and evaluates in detail potential risks with the project core team in the planning phase and establishes mitigation plans.
|
SCM Project Manager (m/f/d)
|
Austria |
Supply Chain Management |
2021-04-27 |
Responsible for design leadership and development of ultra-high performance, low noise analog solutions associated with mixed signal IC’s from initial concept, until production ramp, including design for: manufacturability, yield, test, and reliability.
Performs and supervises detailed design, simulation, verification and validation of integrated circuits
Directs and supervises block level and top-level layout actives to insure optimum circuit performance.
Expert level knowledge and experience designing for system / application level concerns, including: packaging, parasitics, power, die size, cost, etc.
“Power User” level knowledge of SPICE/Spectre testbench creation and simulations, including: PVT, Monte Carlo, mixed signal, modelling, optimization, etc.
Provides positive internal team leadership and communication, coordination of design requirements and tradeoffs, preparation for weekly meetings (internal and customer).
Analog design subject matter expert level communication with customer (and/or marketing), including: presentation in design reviews, representing the analog design team on weekly conference calls, defining / tracking / working to insure schedule adherence, interactive problem solving and customer communication under pressure, etc.
Highly creative problem solver, able to generate innovative, new next generation IP and file patents
Generation of detailed relevant documentation including: architectural/concept reviews, design gate reviews, internal design documents, test requirements, etc.
Calm professional demeanor and excellent listening skills
Ability to mentor.
|
Principal Analog Engineer
|
India |
Research & Development |
2021-03-30 |
Kommissionierung, Verpackung und Warenübergabe an Dienstleister
Gefahrengutüberprüfung
Warenannahme & Wareneingangskontrolle
Verbuchung von Materialbewegungen im ERP-System (SAP)
Lösen von Systemproblemen
Bestandskontrolle & Inventurarbeiten
Arbeitsplatzorganisation (5S)
Unterstützung Projekt- & Auditabwicklung
|
Logistics/Packing-Shipping Employee (m/f/d)
|
Austria |
Supply Chain Management |
2021-04-15 |
Reporting to Head of Legal APAC who is based in Singapore (as the regional headquarters for the ams Group), your roles and responsibilities include the following:
Assist legal counsels to review contracts as required by the business, NDA reviews, assist with administering the Contract Loop process and Contract Signature process.
Managing/Maintaining records of all executed contracts/documents in Singapore, including Confidentiality attestations, to be added to the ams contracts and documents database
Assisting legal counsels with legal research and/or analysis on various legal matters, specially in relation to Singapore Corporate law, Business Law and local legislation and regulations.
Supporting Head of Legal APAC with general legal duties, including legal training and promotion of ams established processes and procedures.
Supporting certain admin matters of the ams legal department where required (setting up meetings, note-taking, data analysis and report making), liaising with external specialists (such as the Corporate Secretary) and any other tasks relevant to the above job scope as may be assigned to you by ams’ General Counsel from time to time.
|
Paralegal
|
Singapore |
Central Functions |
2021-04-13 |
Administration duties (Document updates, Mail follow-up, …)
1st Level incident and request handling (registering, checking data, organizing)
Manage lifecycle of controlled documents
Manage approval and review workflows
Maintain Product Change Notification numbers
Prepare documentations for internal & external use
|
Associate, Controlled Documents & Label Administrator (Contractor)
|
Philippines |
Supply Chain Management |
2021-03-30 |
Responsible for SAP master data creation (Material Master, BOM, Routings, Production Versions, Work Centers and Capacities)
Periodic and ad hoc master data maintenance
Maintenance of equipment numbers, availability and utilization rate on Work Centers
Quality assurance of SAP master data
Quality assurance of SAP master data
Update master data after periodic review
|
Specialist, SAP Master Data Administrator (Contractor)
|
Philippines |
Supply Chain Management |
2021-03-30 |
Responsible for SAP master data creation (Material Master, BOM, Routings, Production Versions, Work Centers and Capacities)
Periodic and ad hoc master data maintenance
Maintenance of equipment numbers, availability and utilization rate on Work Centers
Quality assurance of SAP master data
Quality assurance of SAP master data
Update master data after periodic review
|
Specialist, SAP Master Data Administrator (Contractor)
|
Philippines |
Supply Chain Management |
2021-03-30 |
Support rollout of process changes, bug fixes, enhancements, etc. within the functional area Logistics
Documentation of processes (SIPOC, RACI) and preparation of training manuals
Assist in Training activities worldwide (Class room, webinar)
Support the local logistic organization in analyzing complaints (internal / external), defining / implementing corrective actions
Support the local logistic organization during bug fixes in Logistic System issue (ERP, MES, .)
Coordinate bug fixes with other departments
Monitor adherence to specified processes and perform internal on-site audits
Provide data for other departments / Produce regular reports and statistics on a daily, weekly and monthly basis
Collaborations in evaluation / rollout of new packaging methods / materials
Collaborate in integration / UAT tests
|
Specialist, Global Logistics Support (Contractor)
|
Singapore |
Supply Chain Management |
2021-03-30 |
Streamline and drive processes standardization and continuous improvement to effectively support the operating plan and allow optimizing execution to plan
Negotiate and secure capacity requirement with OSAT to ensure support to business change dynamic. Including any off S&OP cycle demand changes support required
Ensure system capacity accuracy to actual external manufacturing commit
Drive OSAT & FSO KPI and ensure supply deliveries to commitment
Accountability to AMS own inventories accuracy in subcon location
Participating in annual audit at subcontractor, Supplier Rating and Business Review Meeting
Lead and continuous team development to achieve operational efficiency on OSAT/FSO management
|
Senior Specialist, OSAT (Contractor)
|
Singapore |
Supply Chain Management |
2021-03-30 |
Responsibility for the successful execution of all tasks of the working group – in particular commissioning, ongoing maintenance, sustainable repair, and improvement of production equipment
On-Call Duty
Responsibility for DIF maintenance personnel
Responsibility for maintenance plans and equipment control (SPC and FDC)
Cooperation in the supervision of the production equipment (commissioning, re-release, maintenance, monitoring, etc.)
Contribution to all other group processes (PM planning, documentation, training, etc.)
Implementation of continuous improvements
|
Group Leader DIF Maintenance (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-03-22 |
Communicate with customers on a regular basis and respond to specific queries
Participate in customer review meetings, understand customer profiles and strategic plans
Build and maintain strong and long lasting customer relationships
Understand customer issues, help to provide solutions, obtain and share customer intelligence with Sales
Trusted advisor for customers, Sales and Operations for any customer supply related matter
Proactive Order Management/ support OTC
Monitor customer forecast and order book, push customer to pull in and load enough order to cover their demand
Act as intermediary between Sales, Customer and BL to ensure orders are placed on time and delivery schedules can be secured
Provide assistance to Sales (backlog reports, statistics and similar)
Grow in line with the tasks
|
Customer Service Specialist (1.5yr Contract)
|
Taiwan |
Customer & Sales Support |
2021-03-19 |
Order management and maintenance, Vendor management and maintenance, Payment management
Process and Productivity improvement
System IT improvement project
To establish local sourcing strategies for all Spend categories such as Equipment and indirect services (office lease, HR & IT related services, office & facility upkeep, Marketing, Professional services, etc.) to achieve best value for ams
To be part of Global team in participation in Commodity Strategies development and sourcing strategies implementation
To provide local market knowledge / intelligence
Work with cross-functional stakeholder to establish and implement Procurement framework and processes to improve productivity
Identifying and implementing cost reduction opportunities across equipment and services. Ensure best overall value is achieve
Leveraging Company spend nationally and globally to ensure financial benefit to the company.
Developing and leading a competitive supplier selection process– bids and commercial negotiations.
Always in the mood of Identifying, benchmark, and selection of new sources of supply
Commercial Contract negotiation. Implementation of Global contract pricing
Implementation of JIT and Consignment program
Responsible for Supplier Performance measurement and drive improvement. Work together with cross function team to resolve supplier performance issues
Conduct supply risk assessments, establish and drive mitigation plans accordingly.
PO issuance to Supplier and resolving Invoices issue
Weekly and Monthly performance reporting
Any other special assignments
|
Specialist SCM Purchasing
|
Philippines |
Operations & Manufacturing |
2021-03-19 |
Identify key trends in the Spectral sensing market, and understand the relevant solutions
Sure in creating the product roadmap for Spectral sensing, ensuring a winning value proposition for ams
Prepare continually further review and develop the business case(s), including resource needs (in close alignment with the R&D team of the BL). Balance long term innovations with short term business creation.
Develop & prioritize a pipeline of design wins maximizing ROI for ams
Accountable for Spectral design wins and project launches to be in spec, in time & in budget
Drive the required development of effective materials/demos/samples including supportive organizations in the regions
Build, maintain and grow a solid network within major OEM ecosystems (customers / partners / suppliers) at business level with a deep understanding of where they are heading
Work with local teams & global sales teams to strengthen and validate the funnel
Responsible for definition and execution of the long term revenue plan and roadmap
Lead the Segment Team, make choices on priority and focus
|
Director Marketing Segment Spectral (m/f/d)
|
Austria |
Marketing |
2021-02-10 |
Technology responsibility in the semiconductor IC fabrication
Supervise process technologies for manufacturing of ICs in close teamwork with Process Engineering, Process R&D, QA, et al.
Optimize processes and solve process problems in teamwork with staff from different departments (e. g. Test, Product Engineering, Design, Design Support,QA, et al)
Evaluate and implement possible process simplifications in order to lower manufacturing costs
Transfer new technologies / process modules from process R&D into production
Take PI responsibility at customer audits
Stabilize technologies supervising lead products of the business units
Improve yield for products via use of defect engineering
Perform physical failure analysis
Support installation of new technologies in house to fulfill optical requirements
|
Process Integration Engineer (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-03-08 |
Software Application engineer based in Shanghai/Shenzhen, focus on Optical Sensor products of ams, support key mobile Applications/Accounts;
Development of software and firmware for embedded systems, including RTOS/Linux/Android platforms
Embedded driver and optical sensing algorithm development in Linux/RTOS or various sensor hub frameworks
Responsible for software architecture and design decisions for overall software system design and architecture
Development of reference systems and demos
Drafting of customer facing documentation, such as application notes, articles, and presentations
Development and presentation of training materials for both internal staff and external customers
Specification of reference applications for target markets including system architectures, circuits, and components
Support Marketing and Engineering in new device definition and work statement preparation
Travel up to 30%
|
Senior Staff Software Application Engineer
|
China |
Marketing |
2021-03-08 |
Supports the definition of detailed characterization and test plans interacting with product designer
Develops electro-optical bench top tester for modules characterization with basic automation for data collection
Runs characterizations and design of experiments operating on the lab setup
Analyzes measurement data collected by lab setup extracting the key parameters of interest, including mass production test data and interacts with IC/3D-System teams to support system debugging
Provides comprehensive documentation of device performances, characterization results, systems and methodologies
Supports the development of novel characterization procedures and protocols for image sensors and optoelectronic modules
Support the definition of mass-production tests and supports operation teams during mass-production test bring up phase
|
3D Image Sensors Characterization Engineer
|
Switzerland |
Research & Development |
2021-03-04 |
Customer and team oriented development of Test hardware for ATE tester platforms in the Test Hardware Development department.
Provide application & technical support to test engineering, test maintenance, test production, Probecard and Loadboard maintenance.
Involvement on all technical aspects of products in production and therefore being an integral part of the definition and development of future products.
Project coordination with internal and external partners.
Perform effective problem solving and troubleshooting.
Produces new ideas, approaches, or insights; creates innovative PCB designs; produces a range of solutions to problems and design challenges.
Monitors and maintains quality; works in a systematic, methodical and orderly way; consistently achieves project goals. Responsible for Customer/Supplier Technical meetings.
Takes responsibility for actions and projects.
Initiates and generates activity and introduces changes into work processes.
Applies detailed technical expertise; uses technology to achieve work objectives; develops job knowledge and expertise (theoretical and practical) through continual professional development.
Demonstrates an understanding of different organizational departments and functions; solves a range of straightforward problems; analyzes possible solutions using standard procedures.
Actively shares knowledge with the team by presenting innovative concepts and implementations.
|
Senior Staff Engineer, Test Hardware Design and Layout (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-02-25 |
Identify key trends in the Spectral sensing market, and understand the relevant solutions
Sure in creating the product roadmap for Spectral sensing, ensuring a winning value proposition for ams
Prepare continually further review and develop the business case(s), including resource needs (in close alignment with the R&D team of the BL). Balance long term innovations with short term business creation.
Develop & prioritize a pipeline of design wins maximizing ROI for ams
Accountable for Spectral design wins and project launches to be in spec, in time & in budget
Drive the required development of effective materials/demos/samples including supportive organizations in the regions
Build, maintain and grow a solid network within major OEM ecosystems (customers / partners / suppliers) at business level with a deep understanding of where they are heading
Work with local teams & global sales teams to strengthen and validate the funnel
Responsible for definition and execution of the long term revenue plan and roadmap
Lead the Segment Team, make choices on priority and focus
|
Director Marketing Segment Spectral (m/f/d)
|
Germany |
Marketing |
2021-02-10 |
Process responsibility in the semiconductor IC fabrication
Sustaining of existing processes in terms of quality-, performance- and throughput improvement
Characterization and implementation of new equipment
Development of new unit processes
Development and implementation of system/product monitoring strategies
Lead continuous improvement programs (also in cooperation with other departments)
Identification and solving of potential process- and equipment problems
Responsible for quality improvements
Technical interface to suppliers
|
Process Engineer IMP/RTP (m/f/d)
|
Austria |
Operations & Manufacturing |
2021-01-29 |
Manage and be accountable for category’s performance metric. Interface with stakeholders on procurement strategies.
Be accountable for total cost of ownership (TCO) for the assigned category.
Prepare for supplier negotiations and to participate in these negotiations to achieve annual saving goals.
Prepare for Business Reviews under guidance to build and sustain a strong supplier relationship together with cross-functional team in driving Supplier on improvement plan.
|
Senior / Specialist, Indirect Services Commodity Lead
|
Singapore |
Global Strategic Purchasing |
2021-01-29 |
Software design for Embedded Systems in the area of cutting edge 3D sensing
Technical team lead for software team in Hyderabad
Driving AR use cases in consumer and automotive applications
Software effort estimation and planning
Software implementation including documentation
Code reviews with peers
Software testing including test specification, test implementation and test automation
Customer support for released software components
New ideas, new product proposals
Maintaining continuous integration infrastructure
|
Senior Staff Embedded Software Engineer
|
India |
Research & Development |
2020-12-09 |
Develops 3D reference designs/demo kits either in-house or with partners
Develops embedded software for ARM Cortex M family and Android kernel space to support 3D ToF camera
Provides 3rd level customer support
Drives the verification of system functionality and KPIs
Interacts in specification of new components/modules to fit optimally to their targeted system application
|
Staff Engineer, 3D System Software Development
|
China |
Research & Development |
2020-12-09 |
Drive and support new proof of concepts for key customers by integrating ams IP into e.g. iOS applications.
Define and deliver comprehensive competitive analysis with electrical and physical teardowns.
Contribute towards definition of future system level technology, product and IP roadmaps.
Coordinate and interface with other cross-functional teams, i.e. system architects, product management, IC design, packaging, applications engineering, test development, project management, field applications, etc. to develop complex, integrated system level solutions.
Provide ongoing support for internal performance evaluation of the sensors products and external evaluations and demonstrations, aligned to company plans.
Identify and work with key ecosystem partners to fill key technology, IP, or resource
Support new product development with respect to datasheet conformality toward internal engineering team as well as customer
Assist with promoting and designing in advanced sensors into end customer systems, leveraging the reference system platforms developed.
Travel globally to meet and work with regional offices, customers and partners
|
Principal Optical System Engineer (m/f/d)
|
Germany |
Research & Development |
2020-11-23 |
Leads System Solutions Architecture definition for Mobile & Wearable (Smartphone, Smartwatch, Augmented Reality) applications
Build close relationship with technical decision makes at key customers & eco-system partners on determining the System Solution Specification, technologies and features for the next generations matching ams and customer constraints, position ams as a thought leader and trusted advisor at key customers
Identify & analyze application/technology trends for Mobile & Wearable perform technology and architecture benchmarking on system solution level
Establish, drive and own application technology roadmap for Mobile & Wearable
Identify technology & eco-system partners to bridge gaps, leads collaboration projects with eco-system partners for technology and solutions development in line with application solutions roadmap
Support ams solution sell activities and position ams as a trusted advisor for sensing solutions: corporate closely with ams regional application center experts as well as Division/Business Line experts.
Proactively provide component requirements to Division/Business Line experts in line with application technology roadmap and overall solution value proposition
Be the highest technical instance for all products and projects in the Solutions portfolio
Define and drive white papers and represent ams at technical conferences
Advice Global Application Marketing Manager regarding Solution roadmap of application
Guide and support Division/Business Lines during solutions development, review solutions and system level results
Reports to the Head of Global Application Marketing & Business Development
|
System Architect Mobile & Wearable (m/f/d)
|
Germany |
Sales |
2020-11-20 |
Responsible for planning and executing digital and mixed signal verification on high performance analog / mixed-signal architectures & circuits
Support and development of verification test plans, test suites and verification activities which includes environment bring-up, regressions, failure debug, and netlist simulation for tape-out, develop detailed test and coverage plans based on IC specifications
Support, write, debug and run test-benches using Verilog-A/Verilog-AMS/System Verilog to verify behavioral and transistor level designs using the AMS-Designer environment
Plan, architect and develop SystemVerilog/UVM/direct test benches, including writing checkers and assertions, customizing constraints, getting functional coverage collection using cover groups, etc
This role requires the candidate to work proactively with RTL Design, Verification, Analog, Architecture teams to ensure that chip meets all the feature requirements. Should be able to make decision on right verification methodology based on type of design
Familiarity with systems using deeply embedded microcontrollers
Create, debug, and run test-benches and scripts to execute transistor-level performance verification over design corners using circuit simulators
Develop support utilities for verification automation, test bench automation, regression and other verification enhancements to improve productivity and functional coverage
Develop behavioral block level models (SystemVerilog-RNM, VerilogA/AMS, wreal, EEnet)
Technical leadership in the development and execution of verification test plans and activities which includes environment setup, regressions, failure debug and netlist simulation for tape-out, develop detailed test and coverage plans based on IC and product specifications
Prepare documents required for design reviews, internal discussions, test requirements and design documentations including DV Plan, DV execution plan, …
Performing block level and top level design verification
Creative problem solver, able to generate new IP and file patents
Help junior / younger engineers learn required knowledge and experience through projects work
|
Staff Engineer, IC Design Verification (m/f/d)
|
Germany |
Research & Development |
2020-06-24 |
Bedienung und Wartung der technischen Anlagen zur Wasseraufbereitung, Abwasserbehandlung und Chemieversorgung
Durchführung von Instandhaltungsarbeiten an den Anlagen
Dokumentation von Wartungsarbeiten
Durchführung von Messungen
Arbeiten an Prozessleitsystemen, Bildschirmen und computergesteuerten Anlagen
Mitarbeit bei Aus- und Umbauprojekten der Chemie-Gruppe
|
Lehrstelle Chemieverfahrenstechniker (m/w/d)
|
Austria |
Central Functions |
2019-12-20 |
Durchführung von analytischen Bestimmungen (Umweltproben bzw. Qualitätssicherung)
Chemische Analytik (Titrationen, Photometrie, instrumentelle Analytik, etc.)
Probenahme und Vor-Ort Messungen
Herstellung von chemischen Zubereitungen
Dokumentation und Bewertung von Analyse-Ergebnissen
Mitarbeit bei Projekten der Chemie-Gruppe und der Abfallwirtschaft
|
Lehrstelle Labortechnik - Chemie (m/w/d)
|
Austria |
Central Functions |
2019-12-20 |
Betreuung von Produktionsmaschinen (Programmieren, Einstellen, Bedienen, Beschicken, Umrüsten, Überwachen)
Warten und Instandhalten von Produktionsmaschinen, sowie systematische Fehlersuche und Reparaturarbeiten
Überwachen der Produktionsprozesse anhand regelmäßiger Produktprüfungen sowie Endtests
Einhalten der betrieblichen Richtlinien bezüglich dem Arbeiten im Reinraum
Ausführen der Arbeiten unter Berücksichtigung der einschlägigen Qualitäts-, Sicherheits- und Umweltstandards
|
Lehrstelle Elektronik - Mikrotechnik (m/w/d)
|
Austria |
Operations & Manufacturing |
2020-10-15 |
Betreuung von Produktionsmaschinen (Programmieren, Einstellen, Bedienen, Beschicken, Umrüsten, Überwachen)
Warten und Instandhalten von Produktionsmaschinen, sowie systematische Fehlersuche und Reparaturarbeiten
Überwachen der Produktionsprozesse anhand regelmäßiger Produktprüfungen sowie Endtests
Einhalten der betrieblichen Richtlinien bezüglich dem Arbeiten im Reinraum
Ausführen der Arbeiten unter Berücksichtigung der einschlägigen Qualitäts-, Sicherheits- und Umweltstandards
|
Lehrstelle Elektronik - Mikrotechnik (m/w/d)
|
Austria |
Operations & Manufacturing |
2019-11-11 |
Betreuung von Produktionsmaschinen (Programmieren, Einstellen, Bedienen, Beschicken, Umrüsten, Überwachen)
Warten und Instandhalten von Produktionsmaschinen, sowie systematische Fehlersuche und Reparaturarbeiten
Überwachen der Produktionsprozesse anhand regelmäßiger Produktprüfungen sowie Endtests
Einhalten der betrieblichen Richtlinien bezüglich dem Arbeiten im Reinraum
Ausführen der Arbeiten unter Berücksichtigung der einschlägigen Qualitäts-, Sicherheits- und Umweltstandards
|
Lehrstelle Elektronik - Mikrotechnik (m/w/d)
|
Austria |
Operations & Manufacturing |
2020-10-15 |
Betreuung von Produktionsmaschinen (Programmieren, Einstellen, Bedienen, Beschicken, Umrüsten, Überwachen)
Warten und Instandhalten von Produktionsmaschinen, sowie systematische Fehlersuche und Reparaturarbeiten
Überwachen der Produktionsprozesse anhand regelmäßiger Produktprüfungen sowie Endtests
Einhalten der betrieblichen Richtlinien bezüglich dem Arbeiten im Reinraum
Ausführen der Arbeiten unter Berücksichtigung der einschlägigen Qualitäts-, Sicherheits- und Umweltstandards
|
Lehrstelle Elektronik - Mikrotechnik (m/w/d)
|
Austria |
Operations & Manufacturing |
2020-10-15 |
Within the design and development of spectral & vital sensor solutions drive:
development of algorithm for sensor data evaluation;
development of algorithm for sensor optimization; development of sensor models; specification of sensor solutions ; test of algorithm; documentation
Evaluation of optical spectra and use cases (Spectral Sensing, Vital Signs, Digital health)
Defining and implementing sensor systems with internal and external partners
Be an innovator and thought leader; regularly develop and protect new IP through patent filings
|
Algorithm Development Engineer / Data Scientist (m/f/d)
|
Germany |
Research & Development |
2020-07-08 |
As member of the group IT service delivery application you are responsible for solving problems and provide standard services in daily business
Depending on your experience you will take part or lead system upgrades
Your focus area will be supporting SAP logistic and warehouse processes
You will be involved in testing new implementations
|
IT Application Engineer
|
Philippines |
IT |
2020-09-07 |
As member of the group IT service delivery application you are responsible for solving problems and provide standard services in daily business
Depending on your experience you will take part or lead system upgrades
Your focus area will be supporting and enhancing SAP procurement processes
You are responsible for creating manuals and documentations for your colleagues doing the daily ticket handling
You will be involved in testing new implementations
You will observe external services to fulfill ams’ standards and governance
|
IT Application Engineer (m/f/d)
|
Austria |
IT |
2020-07-20 |
Measurements of optical systems, GUI development and data analysis
Development of PCB reference designs including testing, characterization and validation
Performance analysis of ams and competitive products. Tear down of end user devices including evaluation reports
Setup of product presentations and trainings for customers and internal staff
Drafting application notes, articles and presentations
Involvement on all technical aspects of products in production, and therefore, being an integral part of the definition and development of future products
Support Marketing and Engineering in work statement preparation
|
Senior HW Application Engineer (m/f/d)
|
Germany |
Research & Development |
2020-07-27 |
Überwachen, Bedienen und Programmieren von Leittechnik und SPS-Systemen
Anlagenbetreuung sowie Wartung und Durchführungen von Überprüfungen im Bereich Lüftungs- und Elektrotechnik
Dokumentation und Datenpflege
Verfolgung, Unterstützung und Umsetzung von technischen Neuerungen und Projekten
Wartung, Kalibrieren und Einstellen von Instrumenten und Elektrogeräten
Montieren, Installieren und Reparieren von elektrischen und elektrotechnischen Bauteilen und Anlagen
|
Lehrstelle Elektrotechnik - Elektro- und Gebäudetechnik (m/w/d)
|
Austria |
Central Functions |
2019-12-23 |
Überwachen, Bedienen und Programmieren von Leittechnik und SPS-Systemen
Anlagenbetreuung sowie Wartung und Durchführungen von Überprüfungen im Bereich Lüftungs- und Elektrotechnik
Dokumentation und Datenpflege
Verfolgung, Unterstützung und Umsetzung von technischen Neuerungen und Projekten
Wartung, Kalibrieren und Einstellen von Instrumenten und Elektrogeräten
Montieren, Installieren und Reparieren von elektrischen und elektrotechnischen Bauteilen und Anlagen
|
Lehrstelle Elektrotechnik - Automatisierungs- und Prozessleittechnik (m/w/d)
|
Austria |
Central Functions |
2019-12-20 |