NanEye
Miniature CMOS image sensor
Features
- Footprint of 1mm x 1mm with 4 contact pads
- Frame rate of 43-62fps @ 249x250 resolution
- Possible to drive a signal through an endoscope of up to 3m
- Designed with a focus on cost efficiency
- 3-micron high sensitive pixel with 62k pixel resolution (125k for stereo module)
Benefits
- Designed for the toughest confined space requirements
- Smooth and accurate image
- Reach further
- Affordable single use application
- Envision the unseen
Product parameters
| Resolution [kP] | 62 |
|---|---|
| Pixel Size [µm] | 3 |
| Size [mm2] | 1 |
| Shutter Type | Rolling |
| Frame Rate [fps] | 62 |
| Output Interface | LVDS 1x 38Mbps |
| Option | Mono, RGB |
| Package | 2x2 SGA or module with cable |
| Special Features | Module with integrated optics |
General Description
NanEye is a miniature sized image sensor for applications where size is a critical factor. The ability of the camera head to drive a signal through a cable up to 3m makes this the ideal component for minimal diameter endoscopes.
With a footprint of just 1mmx1mm, it features a 249x250 resolution with a high sensitive 3um x 3um rolling shutter pixel. The sensor has a high frame rate of about 43fps to 62fps adjustable over power supply.
The sensor includes a 10bit ADC and a bit serial LVDS data interface.
The data line is semi duplex, such that configuration can be communicated to the sensor in the frame brake.
This product suits for the following applications:
- Medical (Endoscopy, Intraoral Scanning)
- Industrial Endoscopy, Robotics, IoT
- Wearable Devices (Eye Tracking, Virtual/Augmented Reality, Gesture Recognition)
Tools
| Title | Category | Headline | Buy |
|---|---|---|---|
| NanoUSB2 Eval Kit | Application Board | NanoUSB2 Eval Kit | |
| NanEye_FOB_2.0 | Application Board | NanEye Fiber Optic Box 2.0 |
Technical Documents
| Type | Description | Language | |
|---|---|---|---|
| Datasheet | 1x1mm, 250x250 pixel; full datasheet | English | |
| Application Note | NanEye 2D Module - Handling Manual | English | |
| Other Product Document | RoHS | English | |
| Other Product Document | RoHS | English | |
| Other Product Document | Product Catalog CMOS Image Sensors | English |
Notifications
| Type | Description | Language | |
|---|---|---|---|
| EoL Notification | Additional specific variants of NanEye (issued 2019-Jul) | English | |
| EoL Notification | NE2D_B&W variant (issued 2019-May) | English | |
| EoL Notification | More specific variants of NanEye (issued 2019-Mar) | English | |
| EoL Notification | Specific variants of NanEye (issued 2019-Mar) | English | |
| EoL Notification | Specific variants of NanEye and NanEye_Stereo (issued 2019-Mar) | English | |
| Product Change Notification | PCN08-2019 (NanEye) | English | |
| Product Change Notification | PCN05A-2018 (NanEye-PCR-08A) | English | |
| Product Change Notification | NanEye-PCR-11 | English | |
| Product Change Notification | NanEye-PCR-07 | English | |
| Product Change Notification | PCN-2018 (NanEye-PCR-08) | English | |
| Product Change Notification | PCN20-2019 (Epoxy Change for all NanEye 2D Camera Modules & Connector) | English |
Other Information
| Type | Description | Language | |
|---|---|---|---|
| Block Diagram | NanEye 2D Block Diagram | English | |
| Factsheet | NanEye USB/HDMI Fiber Optic Box | English |
Related Boards
NanoUSB2 Eval Kit
NanoUSB2 Eval Kit
The USB2 demo kit is the hardware between the camera and the PC and it does the de-serialisation of the data stream that comes from the camera. It allows to control one NanEye 2D camera along with the LED illumination if available on the camera module. The Windows based NanEye Viewer is a software tool that is able to capture images from the camera via USB. It allaows full access to the sensor raw data as well as senor registers. It can perform automatic exposure and illumination control and makes image corrections such as offset, gain correction, demosaic color reconstruction, etc.
NanEye Fiber Optic Box 2.0
NanEye_FOB_2.0
NanEye Fiber Optic Box Demo Kit 2.0 is a fully embedded all in one image processing unit that interfaces the NanEye® micro camera head signals and provides an output of 1080p/60 format HDMI video signal which can be directly plugged to a HDMI compatible monitor. No additional PC or image processing is required. The Demo Kit embeds advanced image processing algorithms to automatic control exposure settings, construct the color data from the raw binary stream and displays an output image of 750 x 750 pixels over an HDMI interface. The USB3 interface allows the connection to the NanEye viewer running on a PC to get access to the sensors’ raw images and control settings. The Demo Kit includes a fiber light source, which provides light to the tip of the NanEye® Sensor probe via a 0.5mm plastic optic fiber. The fiber and NanEye® camera are housed in a 2.3mm diameter lumen of 1m length that can be plugged and unplugged easily from the processing and illumination unit. The illumination intensity is adjustable by a manual dial. The unit is supplied by a 12V wall charger and provides galvanic isolation to the camera head. It can interface to any standard monitor with HDMI input. The main body of the Demo Kit measures only 17cm x 17cm x 5.6cm and provides all necessary video processing and display driving plus the adjustable illumination. For optimal color balancing, the Demo Kit is pre-calibrated to the NanEye® camera head purchased together with the kit.
Related Products
NanEye Stereo
NanEye_Stereo
NanEye Stereo offers the smallest physical dimensions of a digital 3D solution, a true system on chip camera head with fully self timed readout sequencing, AD conversion to 10 bit and bit serial data transmission over LVDS. With it’s 2 x 250 x 250 pixels at 3um pitch and footprint of just 2.2x1mm and height of 1.78mm with integrated optics comprises high aligment of the 2 cameras heads due to wafer level packaging. Futhermore, frame synchronization is also possible.