USB3 Evaluation Kit for CMV8000
General Description
The CMV8000 eval kit can be used for testing and verifying the operation and image quality of the CMV8000 image sensor. The package includes following components: CMV8000 based camera with USB 3.0 interface with lens holder, power cable and adapter, C-mount lens holder, USB cable, USB stick with documentation (including schematics and VHDL code) and software. The system allows the user to evaluate all aspects of the CMV8000 with full access to the sensor registers. Single or multiple image grabbing and saving is possible in multiple formats.
Technical Documents
| Type | Description | Language | |
|---|---|---|---|
| User Guide | MityCAM-C8000 hardware setup guide | English | |
| User Guide | MityCAM CamlinkPanel Users Guide | English | |
| User Guide | MityCAM CamlinkPanel Users Guide | English | |
| User Guide | MityCAM-C8000 hardware setup guide | English | |
| Image | CMV8000 Evaluation Kit | English |
Related Products
CMV8000
CMV8000
The CMV8000 is a global shutter CMOS image sensor with 3360 by 2496 pixels in a 4/3“ optical format. The image array consists of 5.5 µm by 5.5 µm pipelined global shutter pixels, which allow exposure during read out while performing CDS operation reducing fixed pattern and dark noise significantly. The CMV8000 has 16 digital LVDS outputs (serial) each running at 600 Mbps, which results in 104 fps frame rate at full resolution in 10-bit mode. Higher frame rates can be achieved in row-windowing mode or row-subsampling mode. A 12-bit per pixel mode is available at reduced frame rates.
For compatible sockets from Andon Electronics visit http://www.andonelect.com/secure/ImagesClientUpload/crossreferences/image_sensor/ams_(cmosis).pdf
For compatible sockets from Andon Electronics visit http://www.andonelect.com/secure/ImagesClientUpload/crossreferences/image_sensor/ams_(cmosis).pdf