Socket Board for AS5162
General description
The AS5162-EK-SB Socket Board is used for quick programming the AS5161 magnetic angle position sensor without soldering due to its ZIF socket. This board can be used in combination with the UART interface board and the AS5x6y software, which provides the chip with the adequate OTP programming commands.
Technical documents
| Type | Description | Language | ||
|---|---|---|---|---|
| User Guide | Socket board | English |
Other information
| Type | Description | Language | ||
|---|---|---|---|---|
| Image | AS5162SocketBoard Image | English |
Related products
AS5162 Position Sensor
AS5162
The AS5162 is a contactless Hall-based magnetic position sensor for very accurate angular measurement over a full turn of 360°. It is a compact integrated solution which provides the absolute angle measurement with a resolution of 0.09° over a full revolution as analog ratiometric output signal. The internal 14-bit core of the AS5162 enables a fine programming of the start and stop positions with a resolution of 0.02° to allow the finest system mechanical adjustments.
With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
Related boards
Programming Board for AS5xxx
AS5xxx-EK-USB-PB
The AS5xxx Programming Board is used for quick programming the ams magnetic angle position sensor with 1 wire UART interface. This board can be used in combination with the socket boards and adapter boards of the AS5161/62 and AS5261/62, which provides the chip with the adequate OTP programming data.