AS5147U - High Resolution Rotary Position Sensor
14-bit on-axis magnetic rotary position sensor with up to 14-bit binary incremental pulse count
Please note that the shop functionality is still accessible via the Shop Now tab on ams.com product pages Looking for more information? Visit the new product page on ams-osram.com to find all product related information, documents and software.
Related boards
Socket Board for AS5x47
AS5x47SocketBoard
The AS5x47-TS-EK-SB Socket Board is used for quick programming the AS5047D and AS5147 magnetic rotary position sensors without soldering due to its ZIF socket. This board can be used in combination with the USB I&P Box or the SD4Y production programmer.
Adapter Board for AS5x47U
AS5x47UAdapterBoard
The adapter board allows an easy and fast evaluation of the AS5047U/AS5147U. This small board is fully assembled with the ams position sensor and its necessary external components. All relevant signals are available on a dual-row header footprint for easily wiring to an existing application.
Production Programmer SD4Y
SD4Y-PP
The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards.
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip, 264MB)
USB I&P Box for I2C/SPI
USBI&PBox
The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration.
Hardware and Software requirements: PC with Windows 7 or later and a USB-A port
Hardware and Software requirements: PC with Windows 7 or later and a USB-A port
Motor Board for AS5x47U
AS5x47UMotorBoard
The AS5x47U Motor Board is a simple PCB which is designed to adapt to standard size BLDC or stepper motors for easy and quick evaluation of AS5x47U. The sensor and external components (capacitors, etc.) are already soldered to the PCB. The motor board is equipped by default with the AS5147U (automotive qualified), which has the same functions/behavior as AS5047U (no difference for evaluation use)