AS1109 LED Driver IC
8-channel 100mA direct LED driver IC
Features
- Open/Short error detection
- Low current diagnostic mode
- 100mA output current
- 50MHz SPI interface
Benefits
- Improved picture quality & reduced maintenance cost through identifying defect LEDs & its position
- No flickering during LED test
- Highest brightness of LEDs
- Allows high resolution external PWM via SPI
Product parameters
| Outputs [#] | 8 |
|---|---|
| LED Current per Output [mA] | 100 |
| Features | |
| Error Detection | Yes |
| Read-Back | Yes |
| LED-to-LED Matching [%] | 2 |
| Supply Voltage [V] | 3.0 to 5.5 |
| Package | SOIC150-16 \ SSOP150-16 \ TQFN(4x4)-16 |
General Description
The AS1109 is a 100mA 8-channel direct LED driver IC and offers on-chip diagnostics. It can detect open/short LED position during operation and offers a (flickerfree) low current diagnostic mode.
This product suits for the following applications:
- Public information displays
- Stadium displays
- Illumination
Tools
| Title | Category | Headline | Buy |
|---|---|---|---|
| AS1109EvalKit | Application Board | Evaluation Kit for AS1109 |
Technical Documents
| Type | Description | Language | |
|---|---|---|---|
| Datasheet | Document version 1.21 | English | |
| Application Note | LED matrix display | English |
Environmental Documents
| Type | Description | Language | |
|---|---|---|---|
| Material Declaration Form | MDF_176560037_AS1109-BQFT | English | |
| Material Declaration Form | MDF_176560037_AS1109-BQFR | English | |
| Material Declaration Form | MDF_176560035_AS1109-BSOT | English | |
| Material Declaration Form | MDF_176560035_AS1109-BSOU | English | |
| RoHS Certificate | RoHS Certificate_AS1109 | English |
Other Information
| Type | Description | Language | |
|---|---|---|---|
| Block Diagram | AS1109 Block Diagram | English |
Related Boards
Evaluation Kit for AS1109
AS1109EvalKit
The AS1109 is a constant current 8-bit LED driver with diagnostics. The AS1109 Evaluation Kit is powered via an external power supply and must also be controlled via an external device. This can be done with a standard 3-wire interface. Via the output connector different LEDs can be connected to the evaluation kit.